ADA INSTRUMENTS SHOOTER 400 User Manual [ru]

Operating manual

SHOOTER 400

Manufacturer

Address

.

SHOOTER 400

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Appearance of the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

4. Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. Operation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7. Accessory List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Appendix 1- «Certicate of acceptance and sale»
Appendix 2- «Warranty card»

SHOOTER 400

The Laser range and speed nder monocular user’s guide

1. Introduction

The Laser range and speed nder monocular is a portable optoelectronic device combined a laser range
nder, a laser speed nder and a monocular in one. Its function includes:

1) Measure the distance of a stationary and slowly moving object within a certain range and can, at the same
time, observe the object with great clearness It possesses many advantages, such as a high accuracy,short
measuring time, low power consumption and automatic shutoff for power saving etc.

2) Measure the speed of fast moving object, and at the same time, can observe the object with great clear-

ness.

The transmission power of this device is very small and no harm to users’ eyes, any target can be measured
at random. It is compact, accurate in measure, light in weight, small in volume, very easy to operate and
carry about. One piece of CR2/3v battery is used which can be bought and changed easily.

The laser range and speed nder monocular can be widely used for travel, sightseeing, golf sports, hunt­ing, camping as well as for any measurement of outdoor projects. It is a very good assistant to improve our
outdoor life quality.

3

MEASUREMENT FOUNDATION

2. Appearance of the Device

Start Button

Eyepiece

Battery Housing

Figure 1. Appearance of The Laser Range and Speed Finder Monocular

Mode Button

Laser Receiving Lens

SHOOTER 400

Laser Emitting / Telescope Lens

4

MEASUREMENT FOUNDATION

3.The Specications of the Laser Range and Speed Finder Monocular:

SHOOTER 400

Measuring Range of Distance
Measuring Range of Speed

Laser type

Object lens size
Eyepiece size
Magnication
Field of view
Exit pupil diameter
Diopter adjust range
Operating temperatures
Range measure accuracy
Speed measure accuracy

Battery

Low Battery indicator

Net Weight

Dimensions

6 ~ 400 m
0-300 km/h
905 nm
24 mm
16 mm

X

6

7°

3.9 mm

±4

-20 ~ 50°C

±1 M (Y) ± 0.2%

±5 km/h
CR 2/3 V

185 g
104x72x41 mm

5

MEASUREMENT FOUNDATION

SHOOTER 400

4.The Description for the Built - in Liquid Crystal Display (LCD) of the Laser Range and Speed Finder

Monocular

Ready

Range Speed

KMY / hS

Quality > > > > > >

Figure 2. LCD Indications

6

MEASUREMENT FOUNDATION

SHOOTER 400

1). «Ready» - range nder or speed nder is ready

2).«Range» - range nder mode

3). «Speed» - speed nder mode

4).« » - Laser transmission indication

5).« » - Aiming indication, It is used for aiming the center of a target.

6).« » - Distance display will be in 4 gures.
If measurement is failed, then four dashes « - - - - » will appear.

7) .«KMY/ hS» - Distance and Speed unit indications. It shows «M» or «Y» in the «range nder mode», and
it shows «KM/h» or «M/S» in the «speed nder mode».

8). «Quality > > > > > >» - Distance quality indication.

9). « » - Low battery indication.

7

MEASUREMENT FOUNDATION

SHOOTER 400

5.The Laser Range and Speed Finder Monocular Operation Instructions

5.1 Adjust Telescope

Turn the eyepiece of the monocular until the target becomes clear.

5.2 Start

The Laser Range and Speed Finder Monocular has two buttons, they are «Start» button ( ) and «Mode»
button. Press « » button for about 1 second and the Laser Range and Speed Finder Monocular will start.
The LCD will display as follows Figure 3. :

Ready

Ready

Y

Figure 3

8

MEASUREMENT FOUNDATION

SHOOTER 400

5.3 How to operate the Laser Range Finder

The Laser Range and Speed Finder Monocular has two modes, they are «Range Mode» (default) and «Speed
Mode». Shortly press the «Mode» button and they can be shifted one another. When «Range Mode» is
chosen,”Range”character will appear on the top of the LCD. Shortly press the « » button and the distance
data will be displayed on the bottom of the LCD immediately.
If holding pressed the « » button, Scan measurement of distance starts. The new measured data will be
displayed on the bottom of the LCD ceaseless. After release the « » button, Scan will stop and the LCD will

return initiative state.

The laser indicator « » will blink when laser is transmitting.
In measuring the distance , If the reection of target is too weak,The LCD will display «- - - -». If the measure­ment of distance succeed, «Quality > > > > > >» will appear on the bottom of the LCD. The more numbers of
« > », meaning stronger reection.
Six grades in all are set for the quality of reection. In measuring the distance, the LCD will display as follows
Figure 4.:

9

MEASUREMENT FOUNDATION

SHOOTER 400

Ready

Ready

Y

628

Quality > > > > > >

Ready

Ready

М

574

Quality > > > > > >

10

Figure 4

MEASUREMENT FOUNDATION

SHOOTER 400

5.4 How to operate the Laser Speed Finder. When «Speed Mode» is chosen, «speed» character will appear
on the top of the LCD. Shortly press the « » button and measurement of speed start.The speed data will be
displayed about 3 seconds later, otherwise it means the reection is too weak and the speed measurement is
failed,than LCD will display «----». During the period of speed measurement, always have to aim the moving

target .

When the target speed is being measured, the laser indicator « » will blink, afterward, the marker « > » on the
bottom of the LCD will keep moving, the target speed data will be displayed on the bottom of the LCD at last.
Users have to aim the moving target up to get the speed data and the direction of speed measurement needs
to be in line with the direction of the moving target as best as one can, otherwise the excessive included angle
will affect the veracity of the speed measurement as a result. In measuring the Speed. The LCD will display
as follows Figure 5. :

Ready

Speed

28. 9 M/S

11

Ready

Speed

104 KM/h

Figure 5

MEASUREMENT FOUNDATION