ADA INSTRUMENTS Mechanic 150 User Manual [ru]
INSTRUMENTS
Mechanic 150
Operating manual
Digital Caliper with fractions
Mechanic 150
MEASUREMENTS
BATTERY REPLACEMENT / TROUBLE SHOOTING
FUNCTIONS
ON/OFF - turns the power completely on or off
mm/inch/F - switch between mm, inch and F by short pressing,
mm display in Metric mode
inch display in inch mode
in display in Fraction mode
ZERO - short pressing sets display to 0.00 at any position
Auto shut off display around 5 min, sliding blade to turn on the display
when it shut down.
WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:
1. If the standard or serial product number will be changed, erased, removed or wil be unreadable.
2. Periodic maintenance, repair or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of normal sphere of product application, mentioned in the service instruction, without tentative
written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or nrgligence of the terms of service instruction.
6. Power supply units, chargers, accessories, wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of warranty period because of damages during the operation of the product, it’s transportation and storing, warranty doesn’t resume.
For more information you can visit our website WWW.ADAINSTRUMENTS.COM or write the letter with your questions on info@adainstruments.com
WARRANTY CARD
Name and model of the product ___________________________________________
Serial number ________________date of sale__________________
Name of commercial organization ________________stamp of commercial organization
Warranty period for the instrument explotation is 24 months after the date of original retail
purchase.
During this warranty period the owner of the product has the right for free repair of his
instrument in case of manufacturing defects.
Warranty is valid only with original warranty card, fully and clear filled (stamp or mark of
thr seller is obligatory).
Technical examination of instruments for fault identification which is under the warranty, is
made only in the authorized service center.
In no event shall manufacturer be liable before the client for direct or consewuential damages, loss of profit or any other damage which occur in the result of the instrument outage.
The product is received in the state of operability, without any visible damages, in full
completeness. It is tested in my presence. I have no complaints to the product quality. I
am familiar with the conditions of qarranty service and i agree.
purchaser signature _______________________________
Before operating you should read service instruction!
If you have any questions about the warranty service
and technical support contact seller of this product
Manufacturer: ADAINSTRUMENTS Address: WWW.ADAINSTRUMENTS.COM
Certificate of acceptance and sale
___________________________________________________
___________________________________________________
____________________________________№_____________
name and model of the instrument
______________________________________ ot sdnopserroC
designation of standard and technical requirements
Data of issue ________________________________________
Stamp of quality control department
Price
Sold ____________________________________________
name of commercial establishment
Date of sale _________________________________________
Loading...