Specifications and Main Features
- Model type: AD-4406
- Sensitivity of input: 0.2 μV/division
- Maximum capacity of display: 40,000
- Display refresh rate: Approximately 10 times/second
- Voltage input capacity: -1 mV to +15 mV
- Equipped with:
- HiHi/Hi/OK/Lo/LoLo limit setting & comparison
- Batch setting comparison
- Memory with four codes
- Accumulation of mass values and counts
- Function for holding weight of living animals for measurement
- Protocol Twin universality (UFC) for data output standard customization
- Available interfaces:
- Computer via RS-232C, printer, remote displays (Options: OP-04, OP-05, OP-08)
- Relay outputs rs422 or rs485 (Option: OP-03)
- Output signal 4-20 mA (Option: OP-07)
- Output Loop Current (Option: OP-08)
- Functions for calibration:
- Procedures for division minimum and setting maximum capacity.
- Span Zero and Calibration.
- Function for Setting Weighing Ranges.
- Function for linearizing signals to digital format.
- Compensation of weight against the force of gravity.
- Operating environmental temperature: -10 to 40 degrees celcius
Frequently Asked Questions
Q: What is the maximum display capacity of the AD-4406 weighing indicator?
A: The maximum display capacity is 40,000 divisions.
Q: What types of information outputs can be extracted from the AD-4406?
A: To our knowledge of this apparatus, we have outputs like RS-232C, RS-422/RS 485, analog output which ranges from 4-20 mA and last is current loop output.
Q: Has this scale the capability to weigh a living animal such as a cat?
A: Yes, as further described in the manual under hold function of AD-4406, animals can be weighed.
Q: What is the acceptable range for input voltage for the equipment?
A: Its range falls within?? -1 mv to +15 mv.
Q: What are the actions one is to take in the case of the display showing an error message?
A: Calibration steps and connections on load cells against the error message on the display are to be looked into to rectify things.
User Manual
Loading...