Acu-Rite 832 User Manual

Instruction Manual
Weather Forecaster
model 00832
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor ..... 2
Features & Benets: Display .... 3
Setup .................................... 4
Install or Replace Batteries...... 4
Temperature Units .................. 4
Placement Guidelines ............. 5
Using the Forecaster............... 6
Troubleshooting ..................... 7
Care & Maintenance .............. 8
Specications ......................... 8
FCC Information .................... 8
Customer Support .................. 9
Warranty............................... 9
(877) 221-1252 or visit www.AcuRite.com
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.
Package Contents
1. Display unit with tabletop stand
2. Outdoor sensor
3. Instruction Manual
PRODUCT MUST BE REGISTERED
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
TO RECEIVE WARRANTY SERVICE
Register a Product
Features & Benets
1
2
3
OUTDOOR SENSOR
1. Integrated Hanger For easy placement.
4
2. Wireless Signal Indicator Flashes when data is being sent to the
display unit.
3. Battery Compartment
4. Battery Compartment Cover
2
Features & Benets
1
2
13
6
5
12 11 10
9
3
DISPLAY UNIT FRONT
1. 12 to 24 Hour Weather Forecast Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate your personal forecast.
2. Current Outdoor Temperature Arrow icon indicates direction
temperature is trending.
3. Current Indoor Temperature Arrow icon indicates direction
temperature is trending.
4. Display Low Battery Indicator
5. Sensor Low Battery Indicator
6. Pressure Trend Indicator
Arrow icon indicates direction pressure is trending.
4
7
DISPLAY UNIT BACK
7. Battery Compartment Cover
8. Battery Compartment
9. Display Kickstand for tabletop placement
10. RE-SYNC Button Resets current temperature and high/
low records for outdoor temperature.
11. MAX/MIN Button Press to view maximum/minimum
records.
12. ˚C/˚F Switch
Select degrees Celsius or degrees Fahrenheit temperature units.
13. Integrated Hang Hole
8
3
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Display Unit
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Select Degrees Fahrenheit or Celsius
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, press the “ºC/ºF” button located on the back of the display unit.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
4
Loading...
+ 8 hidden pages