AcuRite 02059 Instruction Manual

Instruction Manual

Thermometer

model 02059

pm

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor..... 2

Features & Benets: Display.... 3

Setup .................................... 4

Sensor Setup ......................... 4

Display Setup ........................ 5

Set Time & Units..................... 6

•

1111

Placement Guidelines ............. 7

Using the Thermometer........... 8

Troubleshooting ..................... 9

Care & Maintenance.............10

Specications........................10

FCC Information ...................10

Customer Support ................. 11

Warranty..............................11

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Display with tabletop stand

2. Wireless Sensor

3. Instruction Manual

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

Features & Benets

1

2

'---

3

4

11,

5

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Archived Products

Register a Product

►

WIRELESS SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent to the
display.

3. Battery Compartment

4. A-B-C Switch

ID code that identies the sensor on
the display.

5. Battery Compartment Cover

2

SETSET

°F °C°F

°C

Features & Benets

DISPLAY FRONT DISPLAY BACK

1

2
3

pm

4

1

3

10

9
8
7

6

5

18

17
16

15

14

13

SET

DISPLAY FRONT

1. Icon

Indicates today’s high records are

being viewed.

2. Auto-Cycle Indicator

Indicates auto-cycle mode is enabled

(see page 8).

3. Icon

Indicates today’s low records are

being viewed.

4. Clock

5. Current Display Temperature

6. Display Low Battery Indicator

7. Sensor Low Battery Indicator

8. Sensor Signal Strength

9. Sensor Indicator

10. Current Sensor Temperature

For selected sensor (#9).

11

12

DISPLAY BACK

11. Battery Compartment Cover

12. Display Stand

13. Battery Compartment

14. °F/°C Switch

Press to select temperature units.

15. ▼ Button

For setup preferences and viewing
records.

16. SET Button

For setup preferences.

17. ▲ Button

For setup preferences and viewing
records.

18. Integrated Hang Hole

For easy wall mounting.

3

SETUP

Sensor Setup

Set the A-B-C Switch

1

The A-B-C switch is located inside

•

the battery compartment. It can
be set to A, B or C. However, you
must select different letter choices
for each of the sensors if you are
synchronizing more than one.

Install or Replace Batteries

2

AcuRite recommends high quality

•

alkaline or lithium batteries for

the best product performance.

Heavy duty or rechargeable

batteries are not recommended.

The sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.

1. Slide off the battery compartment
cover. Take note of the A-B-C
switch setting inside the battery

compartment.

2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram
in the battery compartment.

3. Replace the battery cover.

4. Repeat steps 1-3 to setup

additional sensors (if applicable;
sold separately).

NOTE: The A-B-C switch positions

must differ between each sensor.

Verify that each sensor has a
different channel selected by

checking the switch position in the

battery compartment.

Install Batteries

2

2 AA batteries

A-B-C Switch

1

•

A B C

B~~f~~~S

ALKALINE

BATTERIES

It (•Q ¥•¥&•

4

(70°C) 1S8°F I
(70°C) 1S8°F I

Display Setup

SETSET

°F °C°F

°C

Install or Replace Batteries

1. Remove the battery compartment cover.

2. Insert 3 x AAA alkaline batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment.

3. Replace the battery cover.

SET

Install Batteries

3 AAA batteries

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

5

Set the Time & Units

Press and hold the “SET” button, located on the back of the display, to enter
SET MODE. Once in set mode, the preference you are currently setting will
blink on the display.

To adjust the currently selected (ashing) item, press and release the “▲” or
“▼“ buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:

CLOCK HOUR
CLOCK MINUTE
TEMPERATURE UNITS (ºF or ºC)*

*You may also select between degrees Fahrenheit (°F) or Celsius (°C)
temperature units after setup by pressing and releasing the °F/°C button,
located inside the battery compartment.

You will automatically exit SET MODE if no buttons are pressed for 8 seconds.
Enter setup mode at any time by pressing and holding the “SET” button.

Expand the System

The display features built-in sensors for measuring temperature at its location.
The display can be expanded to track additional areas by using compatible
Temperature Sensors (optional; sold separately). Add up to 3 indoor/outdoor
sensors to observe conditions in additional locations within 330 ft (100 m).

Compatible Sensors are available at: www.AcuRite.com

Compatible Sensors Perfect for:

E

Temperature Sensor

Model 06002RM

• Indoor and outdoor applications

6

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and wireless sensor are critical to the accuracy

and performance of this product.

Display Placement

pm

Place the display in a dry area free of dirt and dust. Display
stands upright for tabletop use or is wall-mountable.

-

Ill

Wireless Sensor Placement

Sensor is water resistant and is designed for indoor or outdoor

use, however, to extend its life place the sensor in an area
protected from direct weather elements. The sensor may also be
placed indoors to measure environmental conditions.

Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from heat sources or vents.

• Display and wireless sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.)

\ I /

--o--

- -

/ I \'

sensor

(330 feet maximum)

(100 meters)

Setup is Complete

The sensor(s) will now synchronize with the display. It may take a few minutes
for synchronization to complete. Please refer to the troubleshooting section of
this manual if anything appears to be functioning improperly.

7

OPERATION

Using the Thermometer

High & Low Records

Today’s high and low temperatures are recorded for both the display and the
wireless sensor(s). Today’s records automatically clear at 12:00am midnight
every day.

To view today’s HIGH temperature records, press and HOLD the “▲” button
until the “ ” icon appears on the display next to the high records. Press and
release the “▲” or “▼“ buttons to cycle through the high records for each
wireless sensor.

To view today’s LOW temperature records, press and HOLD the “▼“ button
until the “ ” icon appears on the display next to the low records. Press and
release the “▲” or “▼“ buttons to cycle through the low records for each
wireless sensor.

View Temperature Readings

The thermometer displays the current temperature readings for both the display
and the wireless sensor(s).

If the thermometer is being used with more than one wireless sensor, toggle
between each sensor’s readings by pressing and releasing the “▲” or “▼“
buttons on the back of the display.

In auto-cycle mode, the display will automatically cycle through the data
available for each wireless sensor. Auto-cycle mode can be activated by
pressing and releasing the “▲” or “▼“ buttons on the back of the display until

the indicator appears.

The Sensor Indicator is used to determine which sensor readings you are
viewing. For example, if the Sensor Indicator is displaying “A”, the readings
are being transmitted from the sensor with the A-B-C switch set to “A.”

8

Troubleshooting

Problem Possible Solution

No wireless sensor

reception

no bars

Tull

If the wireless signal indicator shows no bars:

• Relocate the display and/or the wireless sensor.

The units must be within 330 ft (100 m) of each
other.

• Make sure all units are placed at least 3 feet
(.9 m) away from electronics that may interfere
with the wireless communication (such as TVs,
microwaves, computers, etc).

• Use standard alkaline batteries (or lithium

batteries in sensor when temperature is

below -4ºF/-20ºC). Do not use heavy duty or
rechargeable batteries.

remove at least one battery from each.

other for a few minutes to gain a strong
connection.

placed out of direct sunlight and away from any

heat sources or vents (see page 7).

Batteries may need to be replaced.

Wireless sensor

temperature is ashing

Inaccurate

temperature

Display screen

not working

NOTE: It may take a few minutes for display and
sensor to synchronize after batteries are replaced.

Flashing of the wireless sensor temperature is
generally an indication of wireless interference.

1. Bring both the sensor and display indoors and

2. Reinstall the battery in the wireless sensor.

3. Reinstall the battery in the display.

4. Let the units sit within a couple feet of each

• Make sure both the display and sensor are

• Check that the batteries are installed correctly.

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.

9

Care & Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.

Wireless Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Specications

TEMPERATURE RANGE

Sensor: -40ºF to 158ºF; -40ºC to 70ºC
Display: 32ºF to 122ºF; 0ºC to 50ºC

WIRELESS RANGE

WIRELESS FREQUENCY

POWER

330 ft / 100m depending on home construction materials

433 MHz
Display: 3 x AAA alkaline batteries
Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING

Sensor Data: 16 seconds
Display Data: 60 seconds

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

-

10

Customer Support

AcuRite customer support is committed to providing you with best-in­class service. For assistance, please have the model number of this
product available and contact us in any of the following ways:

(()

[phone]

Visit us at www.AcuRite.com

► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Archive:l Products

Register a Product

►

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date

of purchase.

We recommend that you visit us at
www.AcuRite.com for the fastest way to register
your product. However, product registration
does not eliminate the need to retain your
original proof of purchase in order to obtain
warranty benets.

Chaney Instrument Co. warrants that all products it manufactures
to be of good material and workmanship, and to be free of
defects when properly installed and operated for a period of
one year from the date of purchase. Remedy for breach of this
warranty is limited to repair or replacement of the defective
item(s). Any product which, under normal use and service, is
proven to breach the warranty contained herein within ONE
YEAR from date of sale will, upon examination by Chaney,
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all
responsibility for such transportation costs and charges. This

warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of tness for a particular purpose. Chaney expressly disclaims
all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Chaney further disclaims all
liability from personal injury relating to its products to the extent
permitted by law. By acceptance of any of Chaney’s products,
the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, rm or corporation is
authorized to assume for Chaney any other liability in connection
with the sale of its products. Furthermore, no person, rm or
corporation is authorized to modify or waive the terms of this
paragraph, and the preceding paragraph, unless done in writing
and signed by a duly authorized agent of Chaney. This warranty
gives you specic legal rights, and you may also have other
rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co.

965 Wells St., Lake Geneva, WI 53147

11

ACU

►

RITE®

Weather Temperature Weather Kitchen

Stations & Humidity Alert Radio Thermometers

It’s more than accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with condence

& Timers

ACU RITE.

.

™

Clocks

www.AcuRite.com

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark

of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and

Printed in China

02059M INST 011216 technology. Visit www.AcuRite.com/patents for details.

copyrights are the property of their respective owners. AcuRite uses patented