ACTi E66, E65, E64, E63, E62 User Manual

...
Indoor Dome Series Hardware Manual
D61, D62, D64, D65, E61, E62, E63, E64, E65, E66, E67
2014/05/07
www.acti.com
Hardware Manual
Table of Contents
Precautions ............................................................. 4
Safety Instructions .................................................................................... 6
Introduction ............................................................. 7
The List of Models ..................................................................................... 7
Package Contents ...................................................................................... 8
Physical Description ................................................................................. 9
Mounting Options ..................................................................................... 11
Other Mounting Accessories ................................................................. 13
Installing the Camera on a Surface ..................... 14
Step 1: Drill the Holes .............................................................................. 14
Step 2: Open the Dome Cover ................................................................ 15
Step 3: Install the Camera to the Surface .............................................. 16
Step 4: Connect the Cable ...................................................................... 17
Step 5: Access the Camera Live View .................................................... 18
Step 6: Adjust the Viewing Angle and Focus ........................................ 18
Step 7: Close the Dome Cover ................................................................ 18
Other Adjustments and Accessories .................. 20
How to Adjust the Camera Viewing Angle and Focus .......................... 20
D61, D62, E66, E67 Camera Models .................................................... 20
D64, D65, E61, E62, E63, E64, E65 Camera Models ........................... 22
How to Replace the Dome Cover ............................................................ 23
How to Use a Memory Card .................................................................... 26
How to Insert the Memory Card ............................................................ 26
2
www.acti.com
Hardware Manual
How to Remove the Memory Card ........................................................ 26
Accessing the Camera ......................................... 27
Configure the IP Addresses .................................................................... 27
Access the Camera .................................................................................. 31
3
www.acti.com
Hardware Manual
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow the safety instruction given may directly endanger people, cause damage to the system or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local office if you find any inaccuracies or omissions. We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice.
4
www.acti.com
Hardware Manual
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to the equipment that are not expressly approved by the responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022 and EN 55024. In a domestic environment, this product may cause radio interference in which cause the user may be required to take adequate measures.
5
www.acti.com
Hardware Manual
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause hazards.
Do not use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the inner parts of video product have been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition.
6
www.acti.com
Hardware Manual
D61
1.3MP Indoor Dome with SLLS, Vari-focal lens
D62
2MP Indoor Dome with SLLS, Vari-focal lens
D64
1MP Indoor Dome with D/N, IR, Vari-focal lens
D65
3MP Indoor Dome with D/N, IR, Vari-focal lens
E61
1MP Indoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E62
3MP Indoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E63
5MP Indoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E64
1MP Indoor Dome with D/N, IR, Superior WDR, Vari-focal lens
E65
3MP Indoor Dome with D/N, IR, Superior WDR, Vari-focal lens
E66
1.3MP Indoor Dome with Basic WDR, SLLS, Vari-focal lens
E67
2MP Indoor Dome with Basic WDR, SLLS, Vari-focal lens
Introduction
The List of Models
This hardware manual contains the following models:
From the installation perspective these models are very similar; therefore you can use one manual for all of them.
7
www.acti.com
Package Contents
Camera
(D64, D65, E61, E62,
E63, E64, E65)
Camera
(D61, D62, E66, E67)
Mounting Screw Kit
Hexagon Screwdriver
Quick Installation Guide
Warranty Card
Drill Template
Drill Template
Hardware Manual
8
www.acti.com
Physical Description
D61, D62, E66, E67
Hardware Manual
D64, D65, E61, E62, E63, E64, E65
1) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including the administrators password.
9
www.acti.com
Hardware Manual
The reset button can be used for following purposes:
The administrators password has been forgotten and therefore the camera cannot be accessed.
1. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to modify these settings.
2. In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Using a pointed object, such as a paper clip, press and hold the reset button for 5 seconds.
2) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Use a Memory
Card on page 26 for more information.
NOTE: Supports microSDHC and microSDXC cards.
3) Ethernet Port
Connects to a network using an Ethernet cable.
10
Loading...
+ 23 hidden pages