ACT ACTPRO MIFARE Datasheet
ACTpro mifare®
Product Overview
Smart Cards are cards with memory on board that
can be read or written to. A contactless smart card
does not need to be in direct contact with a reader.
Instead, it communicates using wireless technology.
mifare is a 13.56MHz contactless technology that
allows one card to be used for many applications.
ACT has developed a range of mifare readers,
compatible with the ACTpro family of access
control units. The ACTpro mifare readers are
configurable to read either a mifare card serial
number or from a sector on the mifare card.
Main Features
●
Choice of mifare proximity only
or pin and mifare proximity
●
Reader configurable as a Serial
or Sector Reader
●
Compatible with ACTpro
mifare ISO cards and Fobs
●
Sector reader operation configurable for
non-ACT cards and Fobs via programming card
●
Selectable Clock and Data
or 37-bit Wiegand Output
●
Built-in Buzzer
●
4 Colour LED
●
Surface or flush mount (mounting
directly on to standard electrical box)
●
Robust Polycarbonate housing
●
Indoor or outdoor installation (IP67)
●
Operates between -20ºC and +50ºC
●
+8V to +16V DC operation
mifare Card Readers
ACTpro mifare 1040
3000
ACTpro mifare 1050
1050
Door 1
Installation / Specification Guidelines
●
May be installed in exposed
outdoor conditions (IP67)
●
May be a maximum of 100m from the
controller when powered from +12V
●
Use 8 core screened cable
-Belden 9504 or equivalent
Door 2
1040
100
1050
ACTpro mifare Schematic
ACTpro mifare®
Product Specification
Operating Voltage: 8 - 16 Volts DC
Current Consumption: Typ 70mA Peak 140mA
Weight: 170 grams
Operating Temperature: -20 to +50 C
Dimensions (HxWxD): 110 x 100 x 35 mm
Mounting: Surface or Flush
Installation: Indoor/Outdoor (IP67)
Cabling: Connector blocks
mifare Card Readers
ACTpro mifare 1040
Proximity Only
ACTpro mifare 1050
Proximity & Keypad
Cabling Chart
From To Cable Restriction
Reader Controller 8 core
screened
Belden
9504 or
equivalent
100m at
+12volts
Ordering Information
Proximity Serial /
Sector Reader
Pin & Proximity Serial /
Sector Reader
mifare 1K Batch
ISO Card
mifare 1K Batch Fob
USB mifare Reader
ACTpro mifare 1040
ACTpro mifare 1050
ACTpro mifare 1KB ISO Card
ACTpro mifare 1KB Fob
ACTpro mifare USB Reader
Comparison chart
Feature
Proximity
Keypad
Selectable Serial / Sector Reader
mifare® ISO 14443A Compatible
8 - 16 V DC operation
Connector Block
IP rating
Potted Electronics
ACTpro mifare 1040
Yes
No
Yes
Yes
Yes
Yes
IP67
Yes
ACTpro mifare 1050
Yes
Yes
Yes
Yes
Yes
Yes
IP67
Yes
Reader Compatibility
The ACTpro mifare readers support the mifare classic protocol and are
compatible with any card that uses the following IC:
PHILIPS MF1 S50
PHILIPS MF1 S70
PHILIPS MF0ICU10*
PHILIPS MF0ICU11*
INFINEON SLE 66R35
*serial number only
Specification
ACTpro mifare 1KB Fob
Mifare S50 1k fob with a maximum read
range of 3 centimetres
ACTpro mifare 1KB ISO Card
Suitable for ID printing with Mifare S50 with
a maximum read range of 5 centimetres
ACTpro mifare USB Reader
ACTpro mifare Fob
The ACTpro mifare USB reader may be used
to enrol mifare cardholders on ACT Win pro*
software and is also capable of creating
programming cards for sites that use
non-ACT mifare cards.
*requires ACTWin pro 2.3 or later
Access Control Technology Unit C1, South City Business Park, Tallaght, Dublin 24, Ireland.
t: 353 (0) 1 466 2570. f: 353 (0) 1 452 0427. e: sales@accesscontrol.ie. w: www.accesscontrol.ie
ACTpro mifare ISO card ACTpro mifare USB Reader
Loading...