Hostbill Integration Manual
Automatic and fast provisioning of BackupAgent for service providers
using HostBill
1. About BackupAgent For HostBill
BackupAgent for HostBill is a module which allows your customers to quickly and conveniently
order and manage a ready BackupAgent services from your HostBill client area.
2. Installation & Configuration
The only additional requirement for running this module is to install the mcrypt extension,
see:http://php.net/manual/en/book.mcrypt.php
2.1 Upload the Module Files
Upload and unzip the module into your main HostBill directory:
2.2 Add New App
Log in to your HostBill and go to 'Settings' → 'Apps'. Next, click on 'Add New App' as shown on
the following screen.
1
2.3 Configure The App
Choose 'backupagent' from an Application dropdown menu, enter your server details, test
configuration and when the result will be successful press on 'Add New App' button.
2.4 Verify The App
As a result of the previous action, you will see a new app which is ready to use. Let's proceed
with configuration of the module.
2.5 Add New Order Page
Now let's add new order page and new product. To do so, go to 'Settings' → 'Products &
Services' and click on 'Add new order page'.
2.6 Configure The Order Page
Configure your new order page and once you are ready, click on 'Add new order page' button.
2
2.7 Add New Product
When you have new order page, you can add a new product. For this purpose click on 'Add new
product' button as presented on the screen below.
2.8 Configure The Product
Perform basic configuration of the product and go to 'Connect with App' category. Choose
'backupagent' from a 'Third party app' dropdown menu. Afterwards enter same connection
details that you entered while configuring the app and test the connection to make sure that
details are correct. Now you can configure the App for your product. When your product is
ready for action, press on 'Save Changes' button.
3
Loading...