Acer XB280HK QUICK START GUIDE [id]

Quick Guide
LCD MONITOR
XB280HK
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:  Turn off the LCD monitor and unplug the power cord.  Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:  Monitor-to-PC signal cable is frayed or damaged.  Liquid spills onto the LCD monitor or the monitor is exposed to rain.  The LCD monitor or case is damaged.
Package contents
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models)
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the
DP (optional)
DP (optional)
output
the computer. Then tighten
the signal
cable connector.
Connect the USB 3.0 cable to port for fast charge. Connect the USB 3.0 cable to port.
back of the monitor.
into a nearby electrical outlet.
input socket of the monitor, and the
socket of the graphics card on
the thumbscrews on
LCD
monitor
Power cord
DP cable
(optional)
USB cable (optional)
Quick start
guide
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
USB
3. Connect the USB Cable(Optional)
4. Insert the monitor power cable into the power port at the
5. Plug the power cords of your computer and your monitor
GSYNC Experience:
GSYNCrequiresanNVIDIAGeForceGTX650TiBOOSTGPUorhigher.Formore information,visitthenVidia
®
website:http://www.nvidia.com/page/home.html
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.  Increase the separation between the device and receiver.  Connect the device into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.
English
External controls
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
1&2
Power button
Turns the monitor on/off. Blue indicates power on. Amber indicates standby/ power saving mode.
3
4
5
6
7
MENU OSD functions
Press this key to activate the OSD menu.
ULMB
Overdrive
P
re
ss
t
hi
s
ke
y
to
a
ct
iv
at
e
th
e
Ov
er
dr
iv
e
fu
nc
ti
on
a
nd
s
et
i
t
to
e
it
he
r
No
rm
al
o
r
Extreme mode.
Em
po
we
ri
ng
P
re
ss
t
he
E
mp
ow
er
in
g
Ke
y
to
o
pe
n
th
e
Ac
er
e
Co
lo
r
Ma
na
ge
me
nt
OSD and access the scenario modes.
Br
ig
ht
ne
ss
Pr
es
s
th
is
k
ey
t
o
op
en
t
he
B
ri
gh
t
n
e
s
s
c
o
n
t
r
o
l
a
n
d
s
e
t
i
t
t
o
y
o
u
r
p
r
e
f
e
r
r
e
d
l
e
v
e
l
.
The
produ
c
t
w
ill
aut
o
matical
l
y
enter
the
Off,
or
Hibernate
Mode
after
15
minutes.
NA
English
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
&$1 ,&(6%10%%
English
SPECIFICATION
LCD Panel
Driving system TFT Color LCD Size Pixel pitch
0.16mm(H) x 0.16mm(V)
Brightness
2
(Typical) Contrast 1,000:1 (native) Viewable angle 17
0
° (H) 1
60
° (V) (CR=10)
Response time
o
) Panel Type Video H-Frequency 30~140KHz V-Frequency 30~70Hz
Display Colors
1.073G Colors Dot Clock Max. Resolution Plug & Play
VESA DDCCI/DDC2B
Power consumption @200cd/m
2
ON Mode Sl
ee
p
Mo
de
0.
Of
f
Mo
de
0.
42
W(
t
yp
.)
Input Connector
Input Video Signal
DP signal (Only DP Model)
Maximum Screen Size
Horizontal:620.9mm Vertical:341.2mm
Power Source
100-240V~, 50/60Hz
Environmental Considerations
Operating Temp: 5° to 35°C Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85% Dimensions Weight (N. W.)
Mechanism spec
Tilt: -5° to +35°
External Controls:
Switch / Buttons
Power Button
Left(<) /Right(>)
ENTER
E(Empowering) Key
Functions
Contrast
Brightness
(Warm) Color
(Cool) Color
RGB Color temperature Language OSD timeout Auto configuration (only Analog input model) Input signal Selection (only Dual input model) Display information Reset
* All specifications are subject to change without notice. Regulatory Compliance
2
"W
FP
DisplayPort
Swi
v
el:
Heigh
t adju
s
tm
en
t: 150mm
Pi
vot:
De
tac
h
ab
le
foot
s
ta
n
d: Y
es (
by R
ele
a
se
butto
n)
G t
G
659 (W) x 411~561(H) x 24
5(D)mm
Find manuals and other documents for your Acer
product on the official Acer support website.
USB Hub / USB3.0 x 4 (Only USB Hub Model)
7.8kg Unit (net)
Y
es
Y
es
1ms (
TN
N214
R33037
R
LR6
044
1

OD
Display port Interface
4
8
71
540MHz
3840 x 2160@60Hz
42.5W(typ.) 8W(typ.)
300cd/m
Important safety instructions
Package contents
Attaching the monitor to the base
Connecting your monitor to a computer
External controls
LCD monitor
Power cord
Audio cable (optional)
VGA cable
DVI cable
Auto
Auto
Minus Plus
Minus Plus
(Optional)
User’s guide
Quick start guide
(optional) (optional)
Regulations and safety notices
FCC notices
CE declaration of conformity
Notice: Shielded cables
Notice: Peripheral devices
Caution
Operation conditions
Notice: Canadian users
Disposal of waste equipment by user in private household in the European Union
/Exit
Panduan Ringkas Acer LCD Monitor
Petunjuk penting tentang keselamatan
Baca petunjuk berikut dengan cermat.
1 Untuk membersihkan layar monitor LCD:
Matikan monitor LCD, lalu lepaskan kabel daya.
Semprotkan cairan pembersih yang lembut pada kain, kemudian bersihkan layar secara perlahan.
2 Jangan letakkan monitor LCD di dekat jendela. Membiarkan monitor terkena hujan, uap air, atau
sinar matahari dapat menyebabkan kerusakan fatal.
3 Jangan tekan layar LCD Tekanan yang berlebihan dapat menyebabkan kerusakan permanen pada
layar.
4 Jangan lepaskan penutup atau berupaya memperbaiki sendiri monitor ini. Setiap perbaikan harus
dilakukan oleh teknisi resmi.
5 Letakkan monitor LCD dalam ruangan dengan suhu -20º hingga 60º C (-4º hingga 140º F).
Meletakkan monitor LCD di luar rentang suhu tersebut dapat menyebabkan kerusakan permanen.
6 Segera lepaskan sambungan monitor, kemudian hubungi teknisi resmi jika terjadi kondisi sebagai
berikut:
Kabel sinyal monitor ke PC terbakar atau rusak.
Monitor LCD terkena cairan atau atau monitor terkena hujan.
Monitor LCD atau casing rusak.
Isi kemasan
M
emasang monitor pada dudukan
Menyambungkan monitor ke komputer
1 Matikan komputer, kemudian lepaskan kabel daya komputer. 2 Sambungkan kabel sinyal ke soket input
(
op
si
on
al
)
pa
da
k
ar
tu
gr
af
is
d
i
ko
mp
ut
er
.
Se
te
la
h
it
u,
ke
nc
an
gk
an
s
ek
ru
p
pa
da
ko
ne
kt
or
k
ab
el
s
in
ya
l.
belakang monitor.
stopkontak yang terdekat.
DP
Bahasa
Indonesian
Catatan: Pengguna di Kanada
Pembuangan peralatan limbah rumah tangga oleh pengguna di Uni Eropa
/Keluar
M
onitor LCD Kabel daya
P
anduan
r
ingkas
Kabel D
P
(opsional)
Kabel
(
opsional)
USB
Sam
bun
gka
n
Ka
b
e
l
U
S
B
(
Op
s
io
n
a
l)
Sambungkan kabel USB 3.0 ke porta untuk pengisian cepat. Sambungkan kabel USB 3.0 ke porta.
(untuk model-model tertentu)
(untuk model-model tertentu)
(untuk model-model tertentu)
atau
(opsional)
dan
pada monitor, lalu ke
DP
atau
3
4 Sambungkan kabel daya monitor ke port daya di bagian
5 Sambungkan kabel daya komputer dan monitor ke
USB3.0 port
-supporting
fast charge
USB3.0 port
USB
U SB
GSYNC Pengalaman:
GSYNCmemerlukanNVIDIAGeForceGTX650TiBOOSTGPUatauyanglebihbaru.Untuk informasiselengkapnya,kunjungisituswebnVidia®: http://www.nvidia.com/page/home.html
Regulations and safety notices
FCC notices
CE declaration of conformity
Notice: Shielded cables
Notice: Peripheral devices
Caution
Operation conditions
Notice: Canadian users
Disposal of waste equipment by user in private household in the European Union
/Exit
Catatan: Pengguna di Kanada
Pembuangan peralatan limbah rumah tangga oleh pengguna di Uni Eropa
Simbol ini pada produk atau kemasannya menunjukkan bahwa produk tersebut tidak
boleh dibuang bersama limbah rumah tangga lainnya. Namun, Anda bertanggung
jawab membuang pera
latan limbah dengan menyerahkannya ke tempat
pengumpulan yang ditetapkan untuk mendaur ulang peralatan limbah listrik dan
elektronik. Pemisahan dan daur ulang peralatan limbah pada saat pembuangan akan
membantu melestarikan sumber daya alam serta memastikan bahwa peralatan
tersebut didaur ulang dengan cara yang akan melindungi kesehatan manusia dan
lingkungan. Untuk informasi lebih lanjut tentang tempat pembuangan peralatan
limbah untuk didaur ulang, hubungi kantor pemerintah daerah setempat, layanan
pembuangan limbah rumah tangga, atau toko tempat Anda membeli produk.
Bahasa
Indonesian
Kontrol
eksternals
T
o
m
b
o
l
d
a
y
a
M
e
n
g
h
i
d
u
p
k
a
n
/
m
e
m
a
t
i
k
a
n
m
o
n
i
t
o
r
.
B
i
r
u
m
e
n
u
n
j
u
k
k
a
n
b
a
h
w
a
d
a
y
a
h
i
d
u
p
.
Kuning menunjukkan mode siaga/hemat daya.
1&2
3
4
5
6
7
&$1
,&(6%10%%
Produk akan secara otomatis beralih ke mode Nonaktif atau Hibernasi setelah 15 menit.
Fungsi OSD
MENU
Tekan tombol ini untuk mengaktifkan menu OSD.
ULMB
Overdrive
T
e
k
a
n
t
o
m
b
o
l
i
n
i
u
n
t
u
k
m
e
n
g
a
k
t
i
f
k
a
n
f
u
n
g
s
i
O
v
e
r
d
r
i
v
e
d
a
n
m
e
n
g
a
t
u
r
n
y
a
k
e
m
o
d
e
Normal atau Ekstrem.
B
r
i
g
h
t
n
e
s
s
(
K
e
c
e
r
a
h
a
n
)
T
e
k
a
n
t
o
m
b
o
l
i
n
i
u
n
t
u
k
m
e
m
b
u
k
a
k
o
n
t
r
o
l
B
r
i
g
h
t
n
e
s
s
(
K
e
c
e
r
a
h
a
n
)
d
a
n
m
e
n
g
a
t
u
r
n
y
a
k
e
tingkat yang diinginkan.
Empowering
Tekan Tombol Empowering untuk membuka OSD Acer eColor
Management dan mengakses mode skenario.
NA
Bahasa
Indonesian
SPESIFIKASI
Panel LCD
Sistem drive LCD TFT Berwarna Ukuran Pitch piksel Kecerahan
2
Kontras Sudut tampilan 170° (H) 160° (V) (CR=10) Waktu respons *WR* Jenis Panel Video Antarmuka Analog DP Frekuensi H Frekuensi V
Warna Layar 1* Warna Dot Clock Resolusi Maksimum Plug & Play VESA DDCCI/DDC2B
Pemakaian daya @200cd/m
2
Mode Hidup Mode Tidur 0.48W(typ.)
Mati
Mode
0.42W(typ.)
Konektor Input
Sinyal Video Input
Ukuran Layar Maksimum
Horizontal:620.9mm
Vertikal:341.2mm
Catu Daya 100-240V~, 50/60Hz
Informasi Tentang Lingkungan
Suhu Pengoperasian: 5°C hingga 35°C Suhu Penyimpanan: -20°C hingga 60°C
Kelembaban Pengoperasian: 10% hingga 85% Dimensi Berat (N. W.)
Spesifikasi mekanisme
Miring: -5º hingga +35º
Putar: Ya
Penyesuaian ketinggian: 150mm
Rotasi: Ya
Dudukan kaki yang dapat dilepas: Ya (menggunakan tombol
Pelepas)
Kontrol Eksternal:
Sakelar/Tombol
Tombol Daya
Kiri (<)/Kanan (>)
ENTER
Tombol Empowering/Keluar
Fungsi
Kontras
Kecerahan
Warna (Hangat)
Warna (Sejuk)
Suhu Warna RGB Bahasa Batas waktu posisi OSD Konfigurasi otomatis (hanya model input Analog) Pemilihan sinyal input (hanya model Input ganda)
Informasi layar Atur Ulang
* Semua spesifikasi dapat berubah tanpa pemberitahuan sebelumnya. Kesesuaian Terhadap Peraturan
300cd/m (Normal)

Cari manual dan dokumen lainnya untuk produk Acer Anda di situs web dukungan Acer resmi.
(Hanya Model DP)
DisplayPort
S
DP
DP
USB Hub / USB 3.0 x 4 (Hanya Model USB Hub)
7.8kg (bersih)
30~10KHz
71
1ms
0MHz
N214
R33037
R
LR60441

1,000:1 (native)
30-0Hz
OD
2 "W
FP
8
71
0.16mm(H) x 0.16mm(V)
3840 x 2160@60Hz
5W(typ.)
659 (P) x 411~561(T) x 24
5
(L)mm
Acer LCDモニター クイックセットアップガイド(QSG)
この度は、Acer LCDモニターをお買い上げいただき、誠にありがとうございます。 ご使用の前に、「本書」及び「ユーザーズマニュアル」をよくお読みいただき、 正しく安全にご使用ください。
ご使用になる前の注意事項
ご使用になる前に、本書の「安全に関するご注意」を必ずお読みください。
正しく安全にお使いいただくために、必ず「ユーザーズマニュアル」をお読みください。
特に「ユーザーズマニュアル」の「使用上の注意事項」を確認の上、正しく安全にご使用くださ
「保証書」は、本書と共に無くさないよう大切に保管してください。
ご使用中に不具合と思われる症状が発生した場合は、速やかに使用を中止して、
弊社カスタマーサポートセンターにご連絡ください。
ユーザーズマニュアルの入手方法
エイサーでは、環境保全の観点から、電子化ユーザーズマニュアルの提供に
取り組んでいます。
「ユーザーズマニュアル」は、エイサー公式ホームページからダウンロードできます。
「エイサー公式ホームページ」→「サポート」→「ドライバとマニュアル」
から該当製品を選択してダウンロードしてください。
ダウンロードサイト、及びマニュアルの内容は、予告なく更新 変更される場合
がございます。あらかじめご了承ください。
ご質問、不明点等ございましたら、弊社カスタマーサポートセンターまでご連絡ください。
安全に関するご注意
記載する内容は、人への危害、財産等への損害を防止するための事項です。
必ずお読みになり、よく理解して正しく安全にご使用ください。
本書では、誤った取り扱いにより生じる危険の度合いや程度を、記号を用いて説明しています。
誤った取り扱いにより、死亡や重傷など 重大な結果に結びつく恐れが大きい 内容です。
誤った取り扱いにより、死亡や重傷など 重大な結果に結びつく恐れがある内容 です。
誤った取り扱いにより、傷害や 家屋家財の損害を負う恐れがある 内容です。
ᣣᧄ⺆
Regulations and safety notices
FCC notices
CE declaration of conformity
Notice: Shielded cables
Notice: Peripheral devices
Caution
Operation conditions
Notice: Canadian users
Disposal of waste equipment by user in private household in the European Union
/Exit
安全に関するご注意(つづき)
異常、故障の時は、すみやかに使用を中止し、コンセントから電源プラグを抜いてください。
煙が出た、異臭がする、変な音がする。
画像が表示されない、乱れる、音が出ない。
内部に水などの液体、異物が入った。
変形、変色、溶解などが見受けられる。
損傷、損壊がある。
電源ケーブルや付属しているケーブル類の取り扱いについて
引っ張る、ねじる、折り曲げる、加工改造する、重いものを乗せる、挟む、
鋭利な先端に接触する、足を引っ掛ける、その他、損傷切断の恐れがある
利用はしないでください。
濡れた手や布で取り扱わない、濡らさない、洗わないでください。
電源プラグをコンセントにしっかり確実に差し込み、たこ足配線しないでください。
電源プラグのほこり等を定期的に取り除いてください。
長期間使用しない場合は、電源プラグを抜いてください。
水などの液体や蒸気の発生する場所物の近くで使用しないでください。
◎高多湿になる場所(浴室サウナ車内など)で使用しないでください。
温度変化の著しい場所物(エアコン加熱機器等)の近くで使用しないでください。
お子様の手の届く範囲で使用しないでください。
本機器内部に、金属や燃えやすいものなど、いかなる異物も入れないでください。
不安定な場所に設置しないでください。
お客様による、修理、分解、改造、等の行為は絶対に行わないでください。
免責事項
地震、雷などの自然災害、火災、第三者による行為、その他の事故、お客様の
故意または過失、誤用、その他異常な条件下での使用により生じた損害に関して、
当社は一切責任を負いません。
記載内容を守らないことにより生じた損害に関して、当社は一切の責任を負いません。
他の接続機器との組合せによる誤動作動作不能、誤操作などから生じた損害
接続機器組合よる
誤動作
動作不能
誤操作
などから
じた損害
に関して、当社は一切責任を負いません。
本製品の使用中、又は使用不能から生じる付随的な損害に関して、当社は一切
責任を負いません。
ᣣᧄ⺆
Loading...