Acer PD323 Quick Start Guide
Quick Start
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your computer are turned off.
2. Connect one end of the VGA cable
to the “VGA In” connector on the
projector; connect the other end
to the VGA connector on the com
-
puter and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to
an electrical outlet.
Powering On the Projector
INTERFACE CONNECTOR
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut
down.
English
1. Power Cord
2. DVI Cable (Optional)
3. VGA Cable
4. S-Video Cable
5. USB Cable
6. VGA to Component/HDTV Adapter
7. Audio Cable Jack/Jack
8. Composite Video Cable
9. RS232 Cable
10. 5V DC Output Jack for attached
Dongle Device (for XD1170/
XD1270 only)
S-Video Output
DVI
VGA
DVD Player, Settop Box,
HDTV receiver
Video Output
RS232
USB
9
for XD1170 /
XD1270 only
1
2
4
5
6
7
8
3
10