Table of Contents
Table of Contents .................................................................................................. 1
Usage Notice ......................................................................................................... 2
Precautions ......................................................................................................... 2
Introduction ........................................................................................................... 4
Product Features ................................................................................................ 4
Package Overview ............................................................................................. 5
Product Overview ............................................................................................... 6
Main Unit .................................................................................................................. 6
Control Panel ........................................................................................................... 7
Connection Ports ..................................................................................................... 8
Remote Control with Laser Pointer ........................................................................... 9
Installation ........................................................................................................... 10
Connecting the Projector .................................................................................. 10
Powering On/Off the Projector .......................................................................... 11
Powering On the Projector ...................................................................................... 11
Powering Off the projector ...................................................................................... 12
Warning Indicator ..................................................................................................... 12
Adjusting the Projected Image ......................................................................... 13
Adjusting the Projector Image Height ...................................................................... 13
Adjusting the Projector Zoom / Focus .................................................................... 14
Adjusting Projected Image Size ............................................................................... 14
User Controls....................................................................................................... 15
Control Panel & Remote Control ..................................................................... 15
On-Screen Display Menus ....................................................................................... 18
How to operate ........................................................................................................ 18
Language ................................................................................................................. 19
Color (Computer/Video Mode) ................................................................................. 20
Image (Computer Mode) .......................................................................................... 22
Image (Video Mode).................................................................................................. 24
Audio (Computer/Video Mode) ................................................................................. 25
Management (Computer/Video Mode) ..................................................................... 26
Appendices ....................................................................................................................... 30
Troubleshooting ......................................................................................................... 30
Replacing the lamp ................................................................................................... 33
Specifications ............................................................................................................. 36
Compatibility Modes ................................................................................................. 37
... English
1
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide to maximize the life of your
unit.
Warning- Do not look into the projector’s lens when the
Warning- To reduce the risk of fire or electric shock, do not
Warning- Please do not open or disassemble the product as
Warning- When changing the lamp, please allow unit to cool
Warning- This product will detect the life of the lamp itself.
lamp is on. The bright light may hurt your eyes.
expose this product to rain or moisture.
this may cause electric shock.
down, and follow all changing instructions.
Please be sure to change the lamp when it shows
warning messages.
English...
Warning- Reset the “Lamp Hour Reset” function from the
On Screen Display “Management” menu after
replacing the lamp module (refer to page 29).
Warning- When switching the projector off, please ensure
the projector completes its cooling cycle before
disconnecting power.
Warning- Turn on the projector first and then the signal
sources.
Warning- Do not use lens cap when projector is in operation.
Warning- When the lamp reaches the end of its life, it will
burn out and may make a loud popping sound. If
this happens, the projector will not turn back on
until the lamp module has been replaced. To
replace the lamp, follow the procedures listed
under “Replacing the Lamp”.
2
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the
display housing.
Disconnect the power plug from AC outlet if the product
is not being used for a long period of time.
Don’t:
Block the slots and openings on the unit provided for
ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic field.
- Place in direct sunlight.
... English
3
Introduction
Product Features
This product is an XGA single chip 0.55” DLPTM projector.
Outstanding features include:
True XGA, 1024 x 768 addressable pixels
Single chip DLPTM technology
NTSC/PAL/SECAM and HDTV compatible
(480i/p, 576i/p, 720p, 1080i)
Full function remote control with laser pointer
User friendly multilingual on screen display menu
Advanced digital keystone correction and high quality full
screen image re-scaling
User friendly control panel
SXGA+, SXGA compression and VGA, SVGA re-sizing
Mac compatible
English...
4
Introduction
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete. Contact your dealer
immediately if anything is missing.
Projector with lens cap Power Cord
Composite Video Cable
S-Video Cable
2 x Battery
User’s Guide
USB Cable
Audio Cable
Carrying Case
VGA to Component
/ HDTV
VGA Cable
Remote Control with
Laser Pointer
Quick Start Card
... English
5
Introduction
Product Overview
Main Unit
English...
1. Control Panel
2. Zoom Ring
3. Focus Ring
4. Zoom Lens
5. Elevator Button
6. Elevator Foot
7. Connection Ports
8. Power Socket
9. Remote Control Receiver
6
Control Panel
1
2
Introduction
3
4
7
1. Menu
2. Temp Indicator LED
3. Lamp Indicator LED
4. Source
5. Re-Sync
6. Power and Indicator LED (Power LED)
7. Four Directional Select Keys
6
5
... English
7
Introduction
Connection Ports
3
1
6
1. USB Connector
2. Audio Input Connector
3. PC Analog Signal/HDTV/Component Video Input Connector
4. S-Video Input Connector
5. Composite Video Input Connector
6. Power Socket
2
4
5
English...
8
Introduction
Remote Control with Laser Pointer
12
16
15
14
13
12
11
10
1. Laser Pointer
2. Transmit Indicator Light
3. Empowering Key
4. Menu
5. Page Up
6. Page Down
7. Keystone -
8. Source
3
4
5
6
7
8
9
9. Freeze
10. Hide
11. Re-Sync
12. Mute
13. Laser
14. Keystone +
15. Four Directional Select Keys
16. Power
... English
9
Installation
Connecting the Projector
USB
2
1
RGB
S-Video Output
3
4
5
DVD Player,
6
7
Settop Box,
HDTV receiver
English...
Video Output
1.............................................................................................. Power Cord
2. ..................................................................................................... USB Cable
3. ............................................................................................ Audio Cable
4. .................................................................................................... VGA Cable
5. ............................................................................................... S-Video Cable
6.............................................................VGA to Component / HDTV Cable
7. .............................................................................. Composite Video Cable
10
Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely connected.
The Power LED will flash blue.
3. Turn on the lamp by pressing “
1
And the Power LED will turn steady blue.
4. Turn on your source (computer, notebook, video player ,etc.).
The projector will detect your source automatically.
the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to
switch.
” button on the control panel.
N
OTE
Turn on the
projector first and
then the signal
sources.
Power
... English
11
Installation
Powering Off the Projector
1. Press the “ ” button to turn off the projector lamp, you will see a
message “Please press power button again to complete the shutdown
process. Warning: DO NOT unplug while the projector fan is still
running.” displayed on the projector’s screen. Press the “
again to confirm, otherwise the message will disappear after 5 seconds.
2. The cooling fans continue to operate for about 60 seconds for cooling
cycle and the Power LED will keep blue.
When the Power LED begins flashing, the projector has entered
standby mode.
If you wish to turn the projector back on, you must wait until the
projector has completed the cooling cycle and has entered standby
mode. Once in standby mode, simply press “
projector.
3. Disconnect the power cord from the electrical outlet and the projector.
4. Do not turn on the projector immediately following a power
off procedure.
Warning Indicator
When the “LAMP” indicator lights solid red, the projector will
automatically shut itself down. Please contact your local reseller or service
center.
When the “TEMP” indicator lights solid red for about 20 seconds, it indicates
the projector has been overheated. The projector will automatically shut itself
down.
Under normal conditions, the projector can be switched on again after it has
cooled down. If the problem persists, you should contact your local dealer or
our service center.
When the “TEMP” indicator solid red for about 10 seconds, Please contact
your local dealer or our service center.
” button
” button to restart the
English...
12
Installation
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting
the image height.
To raise the image:
1. Press the elevator button 1.
2. Raise the image to the desired height angle 2, then release
the button to lock the elevator foot into position.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
foot into position.
1
Elevator Button
2
Elevator Foot
... English
13
Installation
Adjusting the Projector Zoom / Focus
You may turn the zoom ring to zoom in or out. To focus the image,
rotate the focus ring until the image is clear. The projector will focus
at distances from 3.94 to 32.8 feet (1.2 to 10.0 meters).
Adjusting Projection Image Size
312.50"
(793.75cm)
260.00"
(660.4cm)
250.00"
(635cm)
208.00"
(528.32cm)
187.50"
(476.25cm)
156.80"
(396.24cm)
125.00"
(317.5cm)
104.00"
(264.16cm)
62.50"
(158.75cm)
52.00"
(132.08cm)
37.50"
(95.3cm)
31.20"
(79.25cm)
English...
3.94" (1.2m)
6.56" (2.0m)
13.12" (4.0m)
19.68" (6.0m)
26.24" (8.0m)
32.8" (10.0m)
This graph is for user’s reference only.
14
User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Remote
Control and Control Panel.
Control Panel Remote Control
Using the Control Panel
Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
Press “Source” to search for RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Menu
Press “Menu” to launch the on screen display (OSD) menu.
To exit OSD, press “Menu” again.
Four Directional Select Keys
Use to select items or make adjustments to your
selection.
... English
15
User Controls
Using the Remote Control
Power
Refer to the “Power On/Off the Projector” section on pages 11-12.
Empowering Key
Press “e” key to launch e menu on screen display screen and use
to select items.
Acer eView Management
Press to launch “Acer eView Management”
submenu. “Acer eView Management” is for
display mode selection. Please refer to On
Screen Display Menus section for more detail.
Acer eTimer Management
Press to launch “Acer eTimer Management”
submenu. “Acer eTimer Management” provides
the reminding function for presentation time
control. Please refer to On Screen Display Menus
section for more detail.
Acer eOpening Management
Press to launch “Acer eOpening Management”
submenu. “Acer eOpening Management” allows
user to change the Startup screen to their personalized
image. Please refer to On Screen Display section
for details.
English...
Menu
Press “Menu” to launch the on screen display menu. To exit OSD,
press “Menu” again.
Four Directional Select Keys
Use to select items or make adjustments to your
selection.
Laser
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
16
User Controls
Mute
Momentarily turns off the audio.
Keystone + / -
Adjusts image distortion caused by tilting the projector ( 15
degrees).
Page Up (Computer mode only)
Use this button to page up. This function is only available when
the projector is connected to a computer via an USB cable.
Page Down (Computer mode only)
Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Re-Sync
Automatically synchronizes the projector to the input source.
Hide
Momentarily turns off the video. Press “Hide” to hide image,
press again to restore display of the image.
Source
Press “Source” to search for RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Freeze
Press “Freeze” to pause the screen image.
... English
17
User Controls
On-Screen Display Menus
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
press “Menu”on the Control Panel.
2. When OSD is displayed, use
main menu. After selecting the desired main menu item, press
to enter sub menu for feature setting.
3. Use keys to select the desired item and adjust the settings
by key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu” on the Remote Control or press “Menu”on the
Control Panel, the screen will return to the main menu.
6. To exit OSD, press “Menu” on the Remote Control or press “Menu
”on the Control Panel again. The OSD menu will close and the
projector will automatically save the new settings.
keys to select any item in the
English...
18
Main Menu
Sub Menu
Setting
User Controls
Language
Language
Choose the multilingual OSD menu . Use the or key to select
your prefered language.
Press “Menu” on the Remote Control or press “Menu”on the Control
Panel to finalize the selection.
... English
19
User Controls
Display Mode
There are many factory presets optimized for various types of images.
Bright: For brightness optimization.
PC: For computer or notebook.
Video: For playing video in a bright environment.
Theater: For Home Theater usage in a dark room.
sRGB: For true-color optimization.
User: Memorize user's settings.
Brightness
Adjust the brightness of the image.
Press the to darken image.
Press the to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
Press the to decrease the contrast.
Press the to increase the contrast.
Color Temperature
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
White Segment
Use the white Segment control to set the white peaking level of
DMD chip. 0 stands for minimal segment, and 10 stands for maximum
segment. If you prefer a stronger image, adjust towards the maximum
setting. For a smooth and more natural image, adjust towards the
minimum setting.
Color
(Computer / Video
Mode)
English...
20
N
OTE
”Saturation”
and“Tint”
functions are
not supported
under computer
mode.
User Controls
Color
(Computer / Video
Mode)
Degamma
Effects the represent of dark scenery. With greater gamma value,
dark scenery will look brighter.
Saturation
Adjusts a video image from black and white to fully saturated color.
Press the to decrease the amount of color in the image.
Press the to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
Press the to increase the amount of green in the image.
Press the to increase the amount of red in the image.
Color R
Adjusts the red color.
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
... English
21
User Controls
Keystone
Adjust image distortion caused by tilting projection. ( 15 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
Auto : Keep the image with original width-height ratio and
maximize the image to fit native horizontal or vertical pixels.
16:9 : The input source will be scaled to fit the width of the screen.
4:3 : The input source will be scaled to fit the projection screen.
Source Lock
When source lock is turned off, the projector will search for other signals
if the current input signal is lost. When source lock is turned on, it will
“Lock” the current source channel before you press “Source” button on
remote control for next channel.
Projection
Front-Desktop
The factory default setting.
Rear-Desktop
When you select this function, the projector reverses the image so you can
project behind a translucent screen.
Front-Ceiling
When you select this function, the projector turns the image upside down
for ceiling-mounted projection.
Rear-Ceiling
When you select this function, the projector reverses and turns the image
upside down at same time. You can project from behind a translucent
screen with ceiling mounted projection.
Image
(Computer Mode)
English...
22
User Controls
H.Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V. Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
... English
23
User Controls
Keystone
Adjust image distortion caused by tilting projection. ( 15 degrees)
Aspect Ratio
Use this function to choose your desired aspect ratio.
Auto : Keep the image with original width-height ratio and
maximize the image to fit native horizontal or vertical pixels.
16:9 : The input source will be scaled to fit the width of the screen.
4:3 : The input source will be scaled to fit the projection screen.
Projection
Front-Desktop
The factory default setting.
Rear-Desktop
When you select this function, the projector reverses the image so you can project
behind a translucent screen.
Front-Ceiling
When you select this function, the projector turns the image upside down for
ceiling-mounted projection.
Rear-Ceiling
When you select this function, the projector reverses and turns the image upside
down at same time. You can project from behind a translucent screen with ceiling
mounted projection.
Menu Location
Choose the Menu location on the display screen.
Sharpness
Adjusts the sharpness of the image.
Press the to decrease the sharpness.
English...
24
Press the to increase the sharpness.
Image
(Video Mode)
Volume
Press the to decrease the volume.
Press the to increase the volume.
Mute
Choose the “On” to turn mute on.
Choose the “Off” to turn mute off.
User Controls
Audio
(Computer / Video
Mode)
... English
25
User Controls
ECO Mode
Choose “On” to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose ”Off” to
return normal mode.
Auto Shutdown(Minutes)
The projector will auto shutdown while there is no signal input after
the setting time.
Timer Start
Press the to start/stop timer.
Timer Period
Press the to adjust timer period.
Timer Display
Press the to choose timer display mode on the screen.
Timer Location
Choose the timer location on the screen.
Management
(Computer / Video
Mode)
English...
26
User Controls
Management
(Computer / Video
Mode)
Start-up Screen
Use this function to select your desired start-up screen. If you change
the setting from one to another, when you exit the OSD menu, the
new setting will take effect immediately.
Acer: The default start-up screen of Acer projector.
User: The user customized start-up screen, which is downloaded
from PC to projector via the USB cable and Acer eOpening Management
utility (refer to the description of below section).
Acer eOpening Management
... English
27
User Controls
Acer eOpening Management is a PC utility for user to change the default
start-up screen of Acer projector to their desired image. You can
install Acer eOpening Management from the bundled CD. Connect the
projector to your PC with the bundled USB cable then execute Acer
eOpening Management utility to download your desired image from
your PC to projector.
Before the download starts, the projector must enter “Download
Mode” first. Please follow the instruction below to enter “Download
Mode”.
1. If the AC power cord of the projector was unplugged, plug the
AC power.
2. If the projector was turned on, press power button twice to turn
off the projector.
3. Make sure all the fan of projector was shut down and the "Power"
LED is blinking.
4. Press and hold "Menu/Enter" button then press "
5. When "Temp" and "Lamp" LEDs turn on again, release both
buttons, projector enters download mode.
6. Please make sure the USB cable has been plugged and connected
to your projector.
Management
(Computer / Video
Mode)
" button.
English...
28
User Controls
Management
(Computer / Video
Mode)
Lamp Hour Elapse
Displays Hour the lamp’s elapsed operating time (in hours).
Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
Lamp Hour Reset
Press the and then choose “Yes“ to turn the lamp hour counter to
0 hours.
Reset
Press the and then choose “Yes” to return the display parameters
on all menus to the factory default settings.
... English
29
Appendices
Troubleshooting
If you experience trouble with the projector, refer to the
following information. If the problem persists, please contact
your local reseller or service center.
Problem: No image appears on screen.
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
Ensure that the “Hide” feature is not enabled.
Problem: Partial, scrolling or incorrectly displayed image.
Press the “Re-Sync” button on the Remote Control.
If you use a PC:
If the resolution of your computer is higher than 1024 x 768.
Follow the steps outlined below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the “Windows Setup”
icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to 1024 x 768.
For Windows 95,98,2000,XP:
1. Open “My Computer” icon, the “Control Panel” folder, and
then double click on the “Display” icon.
2. Select the “Setting” tab.
3. In the “Desktop Area” you will find the resolution setting.
Verify that the resolution setting is less than or equal to 1024 x
768 resolution.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
English...
30
Appendices
4. Follow the above steps 1-2. Click on the “Advanced Properties”
button.
5. Select the “Change” button under the “Monitor” tab.
6. Click on “Show all devices”. Then select “Standard monitor
types” under the “Manufacturers” box ; choose the resolution
mode you need under the “Models” box.
7. Verify that the resolution setting of the monitor display is less
than or equal to 1024 x 768.
If you are using a Notebook PC:
1. You are required to implement the above steps of resolution
setting of the computer first.
2. Switch the Notebook PC display to the “external display only”
or “CRT only” mode.
If you experience difficulty in changing resolutions or your monitor
freezes, restart all the equipment and the projector.
Problem: The screen of the Notebook or PowerBook computer is
not displaying your presentation.
If you are using a Notebook PC:
Some Notebook PCs may deactivate their screens when a second
display device is in use. Refer to your computer’s documentation
for information on how to reactivate the monitor display.
If you are using an Apple PowerBook:
In Control Panels, open the PowerBook Display to select Video
Mirroring “On”.
Problem: Image is unstable or flickering.
Use “Tracking” to correct it. Refer to page 23.
Change the monitor color setting from your computer.
Problem: Image has vertical flickering bar.
Use “Frequency” to make an adjustment. Refer to page 23.
Check and reconfigure the display mode of your graphic card to
make it compatible with the product. Refer to page 20.
Problem: Image is out of focus.
Adjusts the Focus Ring on the projector lens. Refer to page 14.
Make sure the projection screen is between the required distance
3.94 to 32.8 feet (1.2 to 10.0 meters) from the projector.
... English
31
Appendices
Problem: The image is outstretched when displaying DVD.
Select appropriate aspect ratio in both DVD player and projector
OSD menu to get the correct width-height ratio of the image.
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can’t select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio on screen menu.
Problem: Image is reversed.
Select “Image” from the OSD and adjust the projection
direction. See page 22.
Problem: Lamp burns out or makes a popping sound.
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the “Replacing the Lamp”.
See page 34.
Problem: LED lighting message.
English...
32
Message
Standby State
(Input power cord)
Lamp lighting
Power on
Power off (Cooling)
Error (Lamp fail)
Error (Thermal fail)
Error (Fan lock fail)
Error (Over Temp.)
Error
(Lamp Breakdown)
=>Light On =>Light Off
Power LED
Blue
Flashing
Flashing
Flashing
Flashing
Flashing
Temp LED
Flashing
Lamp LED
Appendices
Problem: Message Reminders.
”Lamp is approaching the end of its useful life in full power
operation. Replacement Suggested!” will be shown about 10
seconds when lamp life is going to deplete.
Problem: Projector automatically turns to standby state.
The environment temperature is too high. Please leave the projector
for at least 30 minutes with the suitable ambient temperature.
... English
33
Appendices
Replacing the lamp
The projector will detect the lamp life itself. It will show you a
warning message “Lamp is approaching the end of its useful life in
full power operation. Replacement Suggested!” When you see this
message, changing the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30 minutes
before changing the lamp.
Do not operate the lamp longer than rated lifetime. Otherwise it
could be high possibility of lamp shattering. A compulsive putting-
out-lights function should operate by the projector side so that the
lamp after a life is not used after that for a long time. We recommend
attachment of a timer etc., and attachment of a lamp exchange display
function to a projector lighting time management of a lamp.
(Recommendation of a regular shutdown).
N
OTE
Warning: Lamp
compartment is
hot! Allow it to
cool down before
changing lamp!
English...
34
1
2
3
4
N
OTE
Warning: To reduce the
risk of personal injury,
do not drop the lamp
module or touch the
lamp bulb. The bulb may
shatter and cause injury
if it is dropped.
Appendices
Lamp Changing Procedure:
1. Turn the power off the projector by pressing the “ ”
button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Use a screwdriver to remove the screw from the cover.
5. Push up and remove the cover.
6. Remove the 2 screws from the lamp module.
7. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
2
3
4
1
... English
35
Appendices
Specifications
The specs specified below are subject to change without notice. Regarding the final
specs, please refer to Acer accounced marketing specs.
Light Valve - Single Chip DLPTM Technology by Texas Instruments
Lamp - 200W User Replaceable Lamp
Number of Pixels - 1024 pixels(H) X 768 lines(V)
Displayable Color - 16.7M colors
Contrast Ratio - 2000:1 (Full on/off) (Min)
Uniformity - 90%
Noise Level - 31 dB(A) (standard mode)/29 dB(A) (ECO mode)
Projection Lens - F2.4 (wide), F2.57 (tele), f=18~21.57mm with 1.2x Manual
zoom lens
Projection Screen Size (Diag.) - 31.2 ~ 312.5 inches Diagonal
Projection Distance - 3.94 to 32.8 feet (1.2 to 10 meters)
Video Compatibility - NTSC/PAL/SECAM and HDTV compatible
- Composite video & S-Video capability
H. Frequency - 31kHz ~79kHz horizontal scan
V. Frequency - 50Hz ~85Hz vertical refresh
Power Supply - Universal AC input 100-240V ; Input Frequency 50/60Hz
I/O Connectors - Power: AC power input socket
- VGA Input:
One 15-pin D-sub for VGA, component and HDTV signal
- Video Input:
One Composite video RCA input
One S-Video input
- USB:One USB connector for remote computer control
- Audio Input: One phone jack for audio input
Weight - 2.3 kg
Dimensions (W x D x H) - 256 x 198 x 92 mm
Environmental - Operating Temperature: 41~95
Humidity: 80% maximum (Non-condensing)
- Storage Temperature: -4~140
Humidity: 80% maximum (Non-condensing)
Safety Regulation - FCC Class B, CE Class B, VCCI-II, UL, cUL,
TUV-GS, C-tick, PSB, PSE, CB Report, CCC
o
F (5~ 35oC)
o
F (-20~60oC)
English...
36
Appendices
Compatibility Modes
Mode Resolution Vertical Frequency (Hz) Horizontal Frequency (kHz)
60 Hz 31.5 kHz
VGA 640 x 480
SVGA 800 x 600
XGA* 1024 x 768
SXGA * 1280 x 1024 60 Hz 64.0 kHz
72 Hz 37.7 kHz
75 Hz 37.5 kHz
85 Hz 43.3 kHz
56 Hz 35.1 kHz
60 Hz 37.9 kHz
72 Hz 48.1 kHz
75 Hz 46.9 kHz
85 Hz 53.7 kHz
60 Hz 48.4 kHz
70 Hz 56.5 kHz
75 Hz 60.0 kHz
80 Hz 64.0 kHz
85 Hz 68.3 kHz
N
OTE
Note : “*” means
compressed.
MAC LC
13"
MAC II 13"
MAC 16"
MAC 19"
MAC
MAC G4
i Mac DV
i Mac DV
i Mac DV
640x480 66.66 Hz 34.98 kHz
640x480 66.68 Hz 35 kHz
832x624
1024x768 75 Hz 60.24 kHz
1152x870 75.06 Hz 68.68 kHz
640x480 60 Hz 31.35 kHz
1024x768 75 Hz 60 kHz
1152x870 75 Hz 68.49 kHz
1280x960 75 Hz 75 kHz
74.55 Hz 49.725 kHz
... English
37
Loading...