Acer PD123 User Manual
English
DVD player or VCR
HDTV tuner
Computer
Projector
1
1
2
3
4
5
6
Quick Start
1
VGA to component / HDTV
2
S-video cable
3
Composite video cable
4
USB cable
5
Audio cable
6
VGA cable
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to
the VGA IN connector on the projector;
connect the other end to the VGA
connector on the computer and tighten
the screws.
3. Connect one end of the power cord to the
AC power socket on the projector; connect
the other end to an electrical power
source.
1. Remove the lens cap.
2. Turn on the projector first and then the
computer.
3. Adjust the position, focus and zoom.
4. Run your presentation
1. Press the power button twice.
2. Do not remove the AC Power cord from
the outlet until the projector fan has shut
down.
INSTALLATION
INTERFACE CONNECTOR
Connecting to a computer Powering on the projector
Powering off the projector
Loading...