Changes may be made periodically to the information in this publication without obligation to notify any
person of such revisions or changes. Such changes will be incorporated in new editions of this User's Guide or
supplementary documents and publications.
Record the model number, serial number, purchase date and place of purchase information in the space
provided below. The serial number and model number are recorded on the label affixed to your handheld. All
correspondence concerning your unit should include the serial number, model number, and purchase
information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission
of Acer Incorporated.
User Guide
Acer p700 Series Portable Navigator
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or
trademarks are used herein for identification purposes only and belong to their respective companies.
Microsoft, Outlook, Pocket Outlook, Windows, Windows NT and the Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft
products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
Acer and its subsidiaries make no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular
purpose. Acer and its subsidiaries assume no responsibility for any damage or loss resulting from the use of this
Acer p700 Series Portable Navigator User Guide.
i
Disposal instructions
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please reuse and
recycle.
USA
For electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the Electronic
Industries Alliance at www.eiae.org
www.lamprecycle.org.
. For lamp-specific disposal information, check
Important safety instructions
Read these instructions carefully. Save them for future reference.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a water-moistened cloth for cleaning.
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product falls, it
could be seriously damaged.
This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Do not allow anything to rest on the power cord. Do not locate this product where
people will walk on the cord.
ii
Disposal instructions
If an extension cord is used with this product, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.
Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind onto or into the product.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
•When the power cord or plug is damaged or frayed.
•If liquid has been spilled into the product.
•If the product has been exposed to rain or water.
•If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
•If the product has been dropped or the case has been damaged.
•If the product exhibits a distinct change in performance, indicating a need for
service.
The Acer p700 Series Portable Navigator
Warning! Batteries may explode if not handled properly. Do not disassemble or
dispose of them in fire. Keep them away from children and dispose of used batteries
promptly.
To avoid hazard of unexpected electrical shock, use the AC adapter only when the
wall socket is properly grounded.
Do not use your device while exercising.
uses a lithium battery.
iii
Acer p700 Series Portable Navigator feature highlights
Acer p700 Series Portable Navigator
No more fumbling with wieldy, outdated paper maps. No more sheepish "I think I’m
lost" expression. And most definitely, no more going in circles finding that particular
spot. Get to your destination the fast and easy way with your new
Portable Navigator
Powerful system
•Microsoft Windows CE version 5.0 operating system
•Samsung 266 MHz processor
•SiRF Star III LP chipset and firmware solution
•Rechargeable 1100 mAh Lithium Ion battery
Wide and accurate GPS coverage
•Intuitive and Intelligent Navigation software
•Integrated chip antenna for optimum satellite pick up
Mobile design
•Compact and lightweight body makes it easy for users to carry it anywhere
while driving or hiking
•Car mount kit for multi-vehicle usage
•On-the-road recharging options via the car charger
Battery life
•Normal usage: 4.5 hours
•Navigation software usage: 3.5 hours
.
feature highlights
Acer p700 Series
Ergonomic features
•4.3-inch WQVGA touch-sensitive LCD screen
•Accessible control hot keys with backlight illumination
•Simple, easy-to-use user interface with large icons and command buttons
•Multi-language support for user interface
•Advanced power-saving options
Multimedia programs
•Photo for your favourite digital pictures
Contacts management program
•Contacts for managing contact information on your device
Bluetooth program
•Bluetooth for selected models only: p760 and p780
•Making and receiving phone calls
iv
Unpacking the Acer p700 Series Portable Navigator
Unpacking the
Thank you for purchasing the
Series Portable Navigator
•
•Car mount kit
Acer p700 Series Portable Navigator
Acer p700 Series Portable Navigator
box contains all of the items listed below.
Acer p700 Series Portable Navigator
unit
. The
Acer p700
Car mountDevice holder
•Car charger
v
Unpacking the Acer p700 Series Portable Navigator
•Wall charger for p700 Series
•Mini USB transfer and charge cable
•Navigation software SD card
vi
Unpacking the Acer p700 Series Portable Navigator
•Pouch
•User Documentation
Acer p700 Series Portable Navigator
–
– TMC ready for p700 Series Portable Navigator Getting Started Guide
Acer p700 Series Portable Navigator
–
– Navigation software Quick Starter Guide
– Navigation software CD
– User can purchase Acer TMC upgrade kit for p710 to enable the TMC
function
– The p730/p760/p780 already include the TMC receiver in the package
NOTE: Report any product defects or missing items to the place of purchase immediately.
Save the boxes and packing materials for future use. Some models may include optional
accessories that might not be shown in the above illustrations. Please check with your dealer
or dial a hotline number, located on the back of the Acer p700 Series warranty booklet, for
more details.
CD
Warranty Booklet
vii
Acer p700 Series Portable Navigator setup
Acer p700 Series Portable Navigator
Using your new
Unpack, turn on, mount and you’re ready to go. Perform the following easy
installation tasks to start using the device straight out of the box:
1.Unpack the device.
2.Set up the device in your vehicle.
NOTE: You should not use the power switch again unless you want to do a hard reset. See
"Performing a hard reset" on page 54 for more information. Instead, use the power button
at the top of the device (see diagram below).
Acer p700 Series Portable Navigator
setup
for the first time is a snap.
viii
First things first
First things first
System tour
System tour
This chapter describes the hardware interface of the
Navigator
system operations are also discussed.
This section gives you a tour of the device hardware interface.
Front and Rear Panels
and its peripherals. Instructions for setting up the device and some basic
Acer p700 Series Portable
7
ix
First things first
System tour
NoIconComponentDescription
1Touch screenDisplays the applications, data, and map
images available on your device. It is
touch sensitive and responds to finger
taps.
2Power status LED indicator Indicates the battery charging status.
• Green – Battery is fully charged
• Orange – Battery charging
• Red – Battery low
3Volume down buttonDecreases speaker volume.
4NAVINavigation buttonTakes you to the navigation panel to
display your current location.
5MicrophoneInternal microphone is used during
phone communication.
6Volume up buttonIncreases speaker volume.
7Speaker Emits system sounds.
NOTE: For more information on how to use your
navigation mode, refer to the Navigation software Quick Starter Guide or the Navigation
software User’s Guide (located on the Navigation software DVD).
Acer p700 Series Portable Navigator
in
x
First things first
System tour
Top and bottom views
1
1
345
No.IconComponentDescription
1Power buttonSwitches the device into standby
mode. If pressed for less than 1.5
seconds, the device will enter suspend
mode; if pressed for longer then 1.5
seconds, the backlight will turn On/
Off.
2
2GPSGPS antenna jackConnects to an external GPS antenna.
3Soft reset buttonUsed to do a soft reset of the device.
For more information, see
"Performing a soft reset" on page 53.
4USB port For USB port: connects the device to
computer running on the Microsoft
Windows platform. Also serves as the
power connector for charging the
device. Connects to external TMC
module (selected models only).
5Power switchUsed to switch device on initially, or to
do a hard reset of the device. For more
information on performing a hard
reset, see "Performing a hard reset"
on page 54.
xi
First things first
System tour
Left and right panels
1
2
No.IconComponentDescription
1Earphone jackConnects to earphones/headphones.
2SD/MMC slotAccepts SD and MMC storage cards, allowing you to
use audio, image, and/or map files stored in it for use
with internal applications.
xii
Peripherals tour
First things first
Peripherals tour
This section gives you a tour of the peripherals bundled with your
Portable Navigator
.
Acer p700 Series
Car mount kit
The car mount kit consists of the car mount (left) and the car holder (right).
1265
43
No.ComponentDescription
7
1Holder plateConnects the car mount to the holder.
2Horizontal angle adjustment knobSlightly loosen the knob to adjust the
3Vertical angle adjustment knobsSlightly loosen the knobs to adjust the
4Suction cup locking leverSecures the vacuum seal of the car mount.
5Suction cupFixes the car mount on the selected
6Suction cup release tabPull to release the vacuum seal of the
7Car mount holes
viewing angle in a left-right direction.
viewing angle in an up-down direction.
mounting area.
suction cup.
Accepts the pegs on the holder plate of the
car mount.
xiii
First things first
Setting up the Acer p700 Series Portable Navigator in your vehicle
Setting up the
your vehicle
The
so you can set up your device in your vehicle. Position the car mount kit on the
windscreen using the suction cup.
NOTE: Some newer vehicle models may have a heat reflective shield embedded in the
windscreen. This may in some cases obstruct the GPS signal reception. If you encounter this
problem in your vehicle, you need to purchase an external GPS antenna. For more
information, contact your local Acer dealer.
Car mount installation reminders
Install the car mount on a surface of your vehicle:
•That is smooth, and free of dirt and oil.
•Where you can easily view/reach it without taking your eyes too far off the
•Where the device will not obscure car controls nor restrict your view of the
•Far from the air bag deployment area.
Setting up the device on your vehicle
This section shows how to install the car mount kit on your vehicle's windscreen using
the suction cup. For dashboard installation procedures using the self-adhesive disk
refer to the
Acer p700 Series Portable Navigator
Acer p700 Series Portable Navigator
road.
road.
Acer p700 Series Portable Navigator
comes with a car mount kit and a car charger
Getting Started Guide.
in
1Clean the mounting surface with a glass cleaner and a clean cotton cloth.
2If the ambient temperature is below 15°C (60°F) warm the mounting area and the
suction cup (e.g. with a hair dryer) to ensure a strong suction bond.
3Install the car mount on the selected area.
•Fix the suction cup to the selected area with the locking lever facing up.
•Flip the locking lever away from you to create a vacuum between the suction
cup and the mounting surface.
xiv
First things first
Setting up the Acer p700 Series Portable Navigator in your vehicle
•Make sure that the suction bond is strong enough before proceeding to the
next step.
•You can now adjust the car mount to your desired position.
4Insert the Navigation software SD card into the device.
xv
First things first
+
+
Setting up the Acer p700 Series Portable Navigator in your vehicle
5Dock the device on the car holder.
6Dock the device with holder on the car mount which has been mounted to your
windscreen then adjust the car mount for the best viewing angle.
7After setting up the device on the car mount, connect the car charger. The power
LED indicator lights up orange during charging.
NOTE: If the car engine is turned off, you may be required to switch the vehicle ignition back
into the Accessories position. Consult your vehicle owner's manual.
NOTE: The device comes with the battery pre-charged to at least 30 percent capacity. You can
start using it once it is mounted in your vehicle and connected to the cigarette lighter.
However, for maximum usage time you need to charge your device to full capacity. Go to
"Recharging the Acer p700 Series Portable Navigator" on page 8 for instructions.
xvi
First things first
Starting up the Acer p700 Series Portable Navigator
Starting up the
Before mounting the
first calibrate the screen. After screen calibration, proceed to configure system
settings. To turn on and calibrate the device:
1When you first turn on your device, you will be asked to calibrate the screen. This process
2Follow the instructions on the screen. After calibrating the screen, please follow
Step 1: Language Setting
Acer p700 Series Portable Navigator
Acer p700 Series Portable Navigator
ensures that when you tap the screen the item tapped is activated.
the steps below to configure system settings.
– Tap the down arrow beside Text and choose the language you prefer.
on your vehicle, you should
Step 2: Date/Time/Time zone Settings
Tap Date:
– Tap + or - beside the Year, Month, and Day settings to set the date
values.
xvii
First things first
Starting up the Acer p700 Series Portable Navigator
Tap Time:
– Tap + or - beside the Hour and Minute settings to set the time values.
– Tap the down arrow beside the Time Zone until the time zone of your
choice is displayed.
Step 3: Password Setting
After Date/Time/Time Zone settings is done, the screen below will pop up.
– Tap YES to set up your password, or tap NO to skip.
xviii
First things first
Starting up the Acer p700 Series Portable Navigator
Step 4: Bluetooth phone Settings
– Tap YES for Bluetooth settings or tap NO to skip the setting and proceed
to the next step. (Bluetooth function is for selected models only: p760
and p780)
– After tapping YES, the screen below will open. Tap to search for
Bluetooth connections.
– Select the desired mobile phone from the list (tap the down arrow to
display the full list) and then tap to pair with the phone.
xix
First things first
Starting up the Acer p700 Series Portable Navigator
– The p700 will attempt to connect to your mobile phone. When
promoted, enter "1111" on your phone to complete pairing. (Screen
image will vary depending on the model of your phone).
– Once pairing is complete, your mobile phone will display a confirmation
message.
Step 5: Navigation Settings
– If you skip the Bluetooth settings, the Navigation Settings screen will
display.
– Tap the arrows beside "Choose a Language" and "Choose a Voice" to
select your preferred choice.
xx
First things first
Starting up the Acer p700 Series Portable Navigator
– Tap the radio button beside "Mile" or "KM" for your preferred unit.
– Tap "Accept" after reading through the warning message.
– Then "Tips and Tricks" will display, you can tap to go to the
previous tip and trick, tap to next tip and trick, or tap to
map screen.
– The screen below will open once navigation settings are complete.
– For more information on the rest of the system configuration options, go
to"System" on page 26.
xxi
First things first
Starting up the Acer p700 Series Portable Navigator
Congratulations! Your new
Proceed to "Acer p700 Series Portable Navigator fundamentals" on page 5 for more
information on the device’s user interface or you can refer to the Navigation software
Quick Starter Guide to start using the device in navigation mode.
This chapter describes basic hardware procedures when using your
Portable Navigator
Hardware interface
Using the touch screen backlight
Under some lighting conditions, viewing the information on your device may be
difficult. If this is the case, activate the backlight by tapping on the screen to
illuminate the touch screen.
Using the SD/MMC slot
Your
Acer p700 Series Portable Navigator
range of SD and MMC storage cards.
Also, the Acer p700 Series’ GPS navigation system has its core on the Navigation
software program. Using this program requires you to load the digital maps available
on the Navigation software SD card included with the device (SD card is included with
certain models only).
Acer p700 Series
. Information on the device’s command interface is also provided.
has an SD/MMC slot compatible with a
Inserting an SD / MMC card
5
Acer p700 Series Portable Navigator fundamentals
1
2
Hardware interface
•Hold the device securely and push the card into the slot until you hear an
audible system sound: this will signal that the card is properly seated in the
slot. The card is secure when it is not protruding from the slot.
Removing a storage card
1Hold the device securely and push in the SD card slightly to allow it to spring out. An
audible system sound will signal that the card has been released.
2Gently remove the card from the slot.
NOTE: The rubber cover of the SD card slot may be damaged if you quickly pull it out or twist
it, please be careful when opening.
6
Loading...
+ 68 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.