Acer MR.JLX11.009 User manual

Acer Projector

P5227/P5327W/P1285i/

P1285B/P1385Wi/P1385WB/

S1385WHBe/S1385WHne

Series User's Guide

Acer Projector User's Guide Original Issue: 01/2015

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMI registered trademarks of HDMI Licensing LLC."

, the HDMI logo and High-Definition Multimedia Interface are trademarks or

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

iii

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices or lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright light

may hurt your eyes.

• Turn on the projector first and then signal sources.

• Do not place the product in the following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, please ensure the projector completes

its cooling cycle before disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to stop before turning main power off.

• Do not touch the air outlet grille and bottom plate which become hot.

• Clean the air filter frequently. The temperature inside may rise and cause

damage when the filter/ventilation slots are clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Contact your local dealer or Acer service center when you need to change

the lamp.

• The product will detect the life of the lamp itself. Please contact your local

dealer or Acer service center for changing the lamp, when lamp warning message displays.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

vii

"Lamp(s) contain Mercury, Dispose Properly."

Caution for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/index.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

viii

First Thing First

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the projector provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• The product will detect the life of the lamp itself. Please contact your local dealer or

Acer service center for changing the lamp, when lamp warning message displays.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center.

Information for Your Safety and Comfort iii

First Thing First viii

Usage Notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 4

Remote Control Layout 5

MHL Feature Introduction 7

Getting Started 8

Connecting the Projector 8

Turning the Projector On/Off 10

Turning On the Projector 10

Turning Off the Projector 11

Adjusting the Projected Image 12

Adjusting the Height of the Projected Image 12

How to Optimize Image Size and Distance 13

How to Get a Preferred Image Size by Adjusting Distance and Zoom 18

User Controls 23

Installation Menu 23

Onscreen Display (OSD) Menus 24

Color 25

Image 27

Setting 30

Management 37

Audio 37

3D 38

Language 39

Appendices 40

Troubleshooting 40

LED & Alarm Definition Listing 44

Using the inner connector(s) 45

Ceiling Mount Installation 46

Specifications 49

Compatibility Modes 53

Regulations and safety notices 57

English

Introduction

Product Features

This product is a single-chip DLP® projector, including the following outstanding features:

• DLP

• P5227/P1285i/P1285B: Native 1024 x 768 XGA resolution, Auto/4:3/16:9

• Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D

• One-touch "3D" button on remote control allows quick and easy access to

• Acer ColorBoost technology delivers vivid, life-like images

• High brightness and contrast ratio

• Versatile display modes enable optimum performance in any situation

• NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported

• Lower power consumption and economy (ECO) mode extends lamp life

• Dynamic Black / ExtremeEco functions help decrease lamp power

• Acer EcoProjection Technology delivers Intelligent power management

• Advanced keystone correction delivers optimum presentations

• Multi-language Onscreen Display (OSD) menus

• Manual focus/zoom projection lens

• 2X digital zoom and pan move function

• Microsoft

• LAN settings enable remote management of projectors via a web browser

• Crestron compliant

technology

aspect ratio supported P5327W/P1385Wi/P1385WB/S1385WHBe/S1385WHne: Native 1280 x 800 WXGA resolution, Auto/Full/4:3 /16:9/L.BOX aspect ratio supported

supported

the 3D functions

consumption and further extend lamp life.

- Dynamic Black: If turned on, the projector dynamically adjusts the power

consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.

- ExtremeEco: The projector will decrease the power consumption of the

lamp by up to 70% when no input signal can be detected for 5 minutes.

approach and physical efficiency improvement

Windows® 2000, XP, 7, 8, 8.1, Vista®, Macintosh OS compliant

English

S1385WHBe/S1385WHne

P5227/P5327W/P1285i/ P1285B/P1385Wi/P1385WB

Package Overview

This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.

Projector Power cord VGA cable

Security card User’s guide (CD-ROM) Remote control

Quick start guide Battery x 2 Carrying case

Dust filter

(Optional)

USB WiFi adapter (Optional) Acer Projector Multi-media

WirelessHD dongle kit

(MWIHD1) (Optional)

(CD-ROM) (Optional)

SmartPen & PB dongle

Acer Projector Multi-media

quick start guide (Optional)

(Optional)

English

Projector Overview

S1385WHBe/S1385WHne

P5227/P5327W/P1285i/ P1285B/P1385Wi/P1385WB

S-VIDEO

HDMI -1/ MHL

VGA IN -2 VGA IN -1 VGA-OUT RS232

USB

MINI-B

AUDIO IN

MIC IN

AUDIO OUT

VIDEO

LAN

USB -A

Wireless Dongle

DC 12V OUT

S-VIDEO

HDMI -1/ MHL

VGA IN -2 VGA IN -1 VGA-OUT RS232

USB MINI-B

AUDIO IN

MIC IN

AUDIO OUT

VIDEO

LAN

USB -A

DC 12V OUT

S-VIDEO

HDMI -1/ MHL

VGA IN -2 VGA IN -1 VGA-OUT RS232

USB MINI-B

AUDIO IN

MIC IN

AUDIO OUT

VIDEO

LAN

USB -A

DC 12V OUT

P1285i/P1285B/P1385Wi/P1385WB/S1385WHBe

S1385WHne

P5227/P5327W

12 1516

3 4 5 6 8 9 10 111 72

16 17 18

3 4 5 6 8 9 10 11

13 14 15

1 2

12 1516

3 4 5 6 8 9 10 111 2

Projector Outlook

Front/upper side

# Description # Description

1 Control panel 4 HDMI (MHL) connector

2 Power key and Power indicator LED 5 Projection lens 3 Zoom ring and Focus ring

Focus ring

Rear side

Micro USB cable

6 Remote control receiver 7Lens cap

# Description # Description 1 Audio output connector 10 Monitor loop-through output 2 Microphone input connector 3 Audio input connector 11 RS232 connector 4 S-Video input connector

5 LAN (RJ45 port for 10/100M

7 PB dongle slot 15 12V DC output connector 8 HDMI (MHL) connector 16 Kensington™ lock port 9 Analog RGB signal/HDTV/

Composite video input connector

Ethernet)

component video input connector

connector

12 USB connector (Type A)

(DC 5V output) 13 USB connector (Type A) 14 Wireless dongle connector

(DC 5V output)6 Mini USB connector

17 Power socket 18 Tilt adjusting wheel

English

Control Panel

P5227/P5327W/S1385WHne

P1285i/P1285B/P1385Wi/ P1385WB/S1385WHBe

# Function Description 1 LAMP Lamp Indicator LED. 2POWER indicator

Refer to the "Turning the Projector On/Off" section.

LED 3 Keystone Adjusts image distortion caused by tilting projection. 4 Power key Refer to the "Turning the Projector On/Off" section. 5 MENU Launches the Onscreen Display (OSD) menu, returns to

the previous step for the OSD menu operation or exits

the OSD menu. 6 MODE Chooses a display mode. 7 TEMP Temp Indicator LED. 8 SOURCE Chooses RGB, component video, S-Video, composite

video, HDMI (MHL) or HDTV source. 9 Four directional

Selects items or makes adjustments to your selection

selection keys

10 RESYNC Automatically synchronizes the projector to the input

source. 11 BACK

Stop

12 ENTER

Play/Pause

Cancels your selection, or goes back to previous page.

Stops the playing of media files.

Confirms your selection of items.

Plays/Pauses the playing of media files.

English

Remote Control Layout

S1385WHBe/S1385WHne

P5227/P5327W/P1285i/ P1285B/P1385Wi/P1385WB

# Function Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 MEDIA SETUP Opens MEDIA SETUP page. (for P1285i/P1285B/P1385Wi/

P1385WB/S1385WHBe) 3 ZOOM Zooms the projector display in or out. 4 MODE Chooses a display mode. 5

Keystone

Adjusts image distortion caused by tilting projection.

6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >

7 VGA To change source to VGA. This connection supports

8 COMPONENT To change source to Component video. This connector

9 S-VIDEO To change source to S-Video. 10 HDMI™/DVI To change source to HDMI™ (or DVI). (for the model

11 Infrared

transmitter

Four directional selection keys

Selects items or makes adjustments to your selection.

"Security" OSD.

analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and

YCbCr (480i/576i).

supports YPbPr/YCbCr.

with HDMI™ or DVI connector)

Sends signals to the projector.

English

# Function Description 12 FREEZE To pause the screen image. 13 SOURCE Chooses RGB, component video, S-Video, composite

video, HDMI (MHL) or HDTV source.

14 HIDE Press "HIDE" to hide screen image; press again to

15 MENU Launches the Onscreen Display (OSD) menu, returns to

16 PgUp/PgDn For computer mode only. Use this button to select the

17 VIDEO To change source to composite video. 18 RATIO Chooses an aspect ratio. 19 WIRELESS;

LAN/WiFi

21 SD/USB A To change source to SD/USB A. This projector only

22 USB B To change source to USB B. (for S1385WHBe) 23 3D Press to open the 3D menu for adjusting 3D settings. 24 Laser Emits visible laser pointer light for presentation

Rewind Play/Pause Stop Fast-forward

display the image.

the previous step for the OSD menu operation or exits the OSD menu.

next or previous page. This function is only available when connected to a computer via a USB cable.

To change source to LAN/WiFi. (for LAN/wireless compatible models)

(No function)

supports files in JPEG format. (for S1385WHBe)

purposes. This function is not available for the projectors sold in the Japanese market.

English

MHL Feature Introduction

When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL control mode. After entering the MHL control mode, press "SOURCE" to switch between the navigation mode (default), media mode and numeric mode.

Description

# Function

4 MODE Long press for one second to enter or leave the

13 SOURCE After entering the MHL control mode, press to

5Four

directional select keys

6 Keypad 0~9 (No function) (No function) Enters 0~9. 15 MENU Goes to the

Rewind

Play/Pause

Stop

Fast-forward

Up Up (No function) (No function) down down (No function) (No function) Left Left Decreases the

Right Right Increases the

Navigation

mode

MHL control mode.

switch between the navigation mode (default), media mode and numeric mode.

root menu.

(No function) Selects or

enters items. Exits current

page. (No function) (No function)

Media mode Numeric mode

(No function)

volume.

(No function)

volume.

(No function) (No function)

Rewinds/Plays/ Pauses/Stops/ Fast-forwards the playing of media files.

Enters 1.

Enters 2.

Enters 3.

English

S-VIDEO

HDMI -1/ MHL

VGA IN -2 VGA IN -1 VGA-OUT RS232

USB

MINI-B

AUDIO IN

MIC IN

AUDIO OUT

VIDEO

LAN

USB -A

Wireless Dongle

DC 12V OUT

HDTV adapter

1312

DVD player, Set-top box,

HDTV receiver

VGA

RS232

Video/S-Video

Output

Display

Speakers

Smartphone/

tablet

Getting Started

Connecting the Projector

# Description # Description

1 Power cord 9 3 RCA component cable

2 VGA cable 10 HDMI (MHL) cable

3 VGA to component video/HDTV adapter 11 RJ45 cable

English

# Description # Description

4 Composite video cable 12 WirelessHD dongle

5 Audio cable 13 Wireless dongle

6 S-Video cable 14* USB storage device/USB Wifi adapter

7 RS232 cable

8 USB cable

(Optional)

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1),

MWA3, Android (MWND1), Chromecast

Note: "*" USB drive limitation, do not support power.

English

S1385WHBe/S1385WHne

P5227/P5327W/P1285i/ P1285B/P1385Wi/P1385WB

1 & 2

Turning the Projector On/Off

Turning On the Projector

1 Ensure that the power cord and signal cable are securely connected.

The Power LED will light red.

2 Turn on the projector by pressing (POWER) on the control panel or

remote control, and the Power indicator LED will turn blue.

3 Turn on your source (computer, notebook, video player, etc.). The

projector will detect your source automatically (when the Source Lock function is disabled).

• If the screen displays "No Signal", please make sure the signal cables are securely connected.

• If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.

English

Turning Off the Projector

1 To turn the projector off, press the power button. This message

appears:

"Please press power button again to complete the shutdown process"

Press the power button again.

2 The LED Power indicator will turn solid red to indicate standby mode.

3 It is now safe to unplug the power cord.

When Instant Resume is selected:

1 The LED Power indicator will turn RED and blink rapidly after the

projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.

2 As long as the power cord remains plugged in, you can press the

power button to turn the projector immediately back on anytime during the 2-minute shutdown process.

3 Once the system has finished cooling, the LED Power indicator will

stop blinking and turn solid red to indicate standby mode.

4 It is now safe to unplug the power cord.

Warning indicators:

• "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center.

• "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center.

Note: Whenever the projector automatically shuts down and

the

LED Temp indicator turns solid red, contact your local

reseller or service center

English

Tilt adjusting wheel

Adjusting the Projected Image

Adjusting the Height of the Projected Image

The projector is equipped with two elevator feet for adjusting the image height.

To raise the image:

1 Use the front Tilt adjusting wheel to raise the image to the desired

height and angle.

2 Use the rear Tilt adjusting wheel to fine-tune the display angle.

To lower the image:

1 Use the front Tilt adjusting wheel to lower the image to the desired

height angle.

2 Use the rear Tilt adjusting wheel to fine-tune the display angle.

+ 50 hidden pages

Acer MR.JLX11.009 User manual

Acer Projector

Information for Your Safety and Comfort

First Thing First

Usage Notes

Precautions

Contents

Introduction

Product Features

Package Overview

Projector Overview

Getting Started

Connecting the Projector

Turning the Projector On/Off

Adjusting the Projected Image