INSTALLATION
DVD player, Set-top Box
HDTV receiver
Video Output
Y
1
Y
INTERFACE CONNECTOR
RBG
2
RBG
HDTV adapter
VGA, DVI
D-Sub
3
D-Sub
Note: Connector interface is subject to model’s specifications
DanskEnglish
Quick Start
X INSTALLATION
1. Composite video cable
2. VGA to component/HDTV adapter
3. VGA cable
Note: Connector interface is subject to model's specifications
Y INTERFACE CONNECTOR
Connecting to a Computer
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to the
“VGA IN” connector on the projector;
connect the other end to the VGA
connector on the computer and tighten
the screws.
3. Connect one end of the AC adapter into
one end of the power cord.
4. Connect the other end of the AC adapter
into the DC IN connector on the
projector; connect the other end of the
power cord to an electrical outlet.
Powering On the Projector
Lynstart
X INSTALLATION
1. Composite video-kabel
2. VGA til komponent/HDTV-adapter
3. VGA-kabel
Bemærk: Konnektorens interface er afhængigt af modellens
specifikationer
Y INTERFACE-KONNEKTOR
Tilslutning til en computer
1. Du skal sikre dig, at projektoren og
computeren er slukket.
2. Tilslut den ene ende af VGA-kablet til
“VGA IN”-konnektoren på projektoren,
og tilslut den anden ende til VGAkonnektoren på computeren. Spænd
skruerne.
3. Tilslut den ene ende af AC-adapteren til
den ene ende af elledningen.
4. Tilslut den anden ende af AC-adapteren
til DC IN-konnektoren på projektoren.
Tilslut den anden ende af elledningen til
en stikkontakt.
Tænd for projektoren
1. Turn on the projector first and then the
computer.
2. Adjust the position and focus.
3. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut down.
1. Tænd først for projektoren og derefter
computeren.
2. Juster position og fokusering.
3. Kør præsentationen.
Sluk for projektoren
1. Tryk to gange på afbryder-knappen.
2. Fjern ikke elledningen fra stikkontakten
før projektorens ventilator er slukket.