Acer CM-02S QUICK START GUIDE

Just forstarters...

Drill four holes into a solid, structural ceiling member, and secure the

ceiling mount base to the ceiling.

Choose the length combination based on actual environment.

(CM-01S doesn’t include Type 2 and Type 3.)

Type 1

Type 2

Type 3

Type 1:

For the standard size use three bracket screws to mount the projector to the ceiling mount bracket.

Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports.

Type 1:

Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.

Connect the main body connector to the projector bracket (illustration 1),

and then screw up four screws (illustration 2).

Type 2:

Type 3:

Illustration 1

Adjust the angle and positioning as necessary.

360°

Illustration 2

Item / Type # Image (x Quantity)

1. Screw Type A X12

-25mm length / 3mm & 4mm diameter

-20mm length / 3mm & 4mm diameter

Usage

Attach projector to ceiling mount bracket-use appropriate size for your equipment

2. Screw Type B X3

12mm length / 5mm width

3. Main Body Connector X1

4. Larger Washer X3

5. Small Fat Cap X3

6. Heat Buﬀer Piece X3

7. Sliding Extension A X3

8. Sliding Extension B X3

9. Ceiling Mount Base X1

10. Projector Bracket X1

11. Short Rod X1

12. Long Rod X1

Attach sliding extension to bracket

Allows for proper heat distribution

Adds to support for larger projector size

Attach to ceiling

Supports projector and allows for adjustments

Basic length unit

Universal Ceiling Mount

13. Connecting Screw

14. Screw Type C X1

Note: 1. Acer recommends that you consult an electrician or carpenter if you are not comfortable with the installation process.

2. The length of CM-01S from ceiling mount base to projector bracket is 11cm, while the length of CM-02S is adjustable from 11cm to 64cm.

3. This ceiling mounting can sustain a projector up to 20 kg weight.

4. The thread type of all the included screws are in metric.

-25mm length / 6mm width

-12mm length / 6mm width

To connect the short/long rods and ceiling mount base

To screw up main body connector to ceiling mount base