Acer Altos R380 F3 User Manual

The Altos R380 F3 is a robust two-socket 2U system that is ideal for almost any application. This dynamic system
can function as a head node, for virtualization purposes, or as a storage system for your HPC (High-Performance
Computing) and technical computing environments. Extremely expandable and highly efficient, this system is a
powerful core for your most demanding data-center needs.

Extremely powerful

The R380 F3 supports up to two Intel® Xeon® E5-2600 v3 product family processors, and high-performance DDR4
memory occupying twenty-four DIMM slots. There is no shortage of storage capability with up to twelve 3.5" or
twenty-four 2.5" front-accessible, hot-swap hard drives, two 2.5” internal drive bays and two 2.5” rear-accessible
hot-swap drive bay options. Hard drives can be configured in 12Gb/s SAS RAID and SAS HBA for increased
performance and data availability.

Highly efficient

As with all Acer rack servers, the R380 F3 uses only 80 PLUS-certified power supplies. This server can be equipped
with up to two 750 W or 1100 W 80 PLUS Platinum-level power supplies. Combine this with Load Reduced DIMM
memory modules and the latest power-saving chipset technologies, this system delivers maximum performance
with minimum power-draw. Six managed, hot-swappable fans keep the system running cool at all times.

Flexible and robust I/O

Qualified to work in any environment, this system has dual 10 Gigabit or Gigabit Ethernet connectors onboard. It
also has up to 7 PCIe 3.0 slots and 1 PCIe 2.0 slot, maximizing your expansion options. In addition, dedicated I/O
module and SAS module slots save customers valuable PCIe expansion. Users can rest assured the R380 F3 will
keep up in any high-performance scenario.

R380 F3

Altos R380 F3 Specifications

Product views

Internal view

1. 2 x Intel

2. 24 x DDR4 ECC Registered/Load Reduced DIMMs

3. 2 x 750 W / 1100 W Platinum-level AC or 2 x 750 W Gold-level DC power supplies

(1+0/1+1 redundant, hot-swappable)

4. Onboard SATA RAID connections

5. 7 x PCIe 3.0 and 1 x PCIe 2.0 slots across three risers

6. Hot-swappable redundant system fans

7. Hot-swappable drive bays (front)

8. Hot-swappable 2.5” SSD drive bays (rear, optional)

9. 1 x I/O module

10. 1 x SAS RAID module

2

®

Xeon® E5-2600 v3 family processors

Altos R380 F3 Specifications

Front Views

Front I/O (12 x 3.5”)

1. Power button, LED indicators: power, HDD activity, LAN, system ID

2. Rack locking screw

3. Up to 12 x 3.5” SATA / SAS HDDs or 2.5” SSDs

4. Front USB 2.0

Front I/O (8 x 3.5”)

1. Power button, LED indicators: power, HDD activity, LAN, system ID

2. Front VGA and 2 x USB 3.0

3. Up to 8 x 3.5” SATA / SAS HDDs or 2.5” SSDs

4. Optional slimline optical drive

Front I/O (16 x 2.5”)

1. Power button, LED indicators: power, HDD activity, LAN, system ID

2. Front VGA and 2 x USB 3.0

3. Optional slimline optical drive

4. Up to 16 x 2.5” SATA / SAS HDDs and SSDs (with an option to replace four hard drives with four PCIe

SFF/NVMe SSDs)

3

Altos R380 F3 Specifications

Front I/O (24 x 2.5”)

1. Power button, LED indicators: power, HDD activity, LAN, system ID

2. Rack locking screw

3. Up to 24 x 2.5” SATA / SAS HDDs and SSDs (with an option to replace four hard drives with four PCIe

SFF/NVMe SSDs)

4. Front USB 2.0

Rear View

Rear I/O

1. 2 x 750 W / 1100 W 80 PLUS Platinum-level AC or

2 x 750 W 80 PLUS Gold-level DC power supplies (1+0/1+1 redundant, hot-swappable)

2. Management port (RJ-45)

3. 3 x USB 3.0 ports

4. Video port

5. 2 x Gigabit or 10Gigabit LAN ports (RJ-45)

6. Serial Port B (optional)

7. PCIe expansion via riser cards

8. 2 x 2.5” SSDs (hot-swappable, optional)

9. Serial Port A (RJ-45)

4

Altos R380 F3 Specifications

Product Specifications

What's New

 New Intel

®

Xeon® E5-2600 v3 processors

 DDR4 memory
 Rear-accessible, hot-swappable drive bays
 Supports four PCIe SFF/NVMe SSDs
 USB 3.0 ports
 Dual-port 10 Gigabit Ethernet on board
 Smart Server Manager with improved management functionality

Processors and Chipset

 Up to two Intel
 Chipset: Intel

®

Xeon® E5-2600 v3 family processors

®

C612

Memory

 24 x DDR4 Registered / Load Reduced DIMMs

Network Controllers

 Dual-port Ethernet controller
 Intel

®

X540 (10GbE) or Intel I350 (1GbE)

Storage

 Hard disk form factor: 3.5” or 2.5”
 Type: SAS / SATA / SSD with hot-plug capability
 Front: up to 12 x 3.5” or 24 x 2.5” hard drives or SSDs (with an option to replace four hard drives with four

PCIe SFF/NVMe SSDs)

 Rear: up to 2 x 2.5” SSDs (optional)
 Internal: up to 2 x 2.5” SSDs (optional)
 Slimline optical drive (optional)

Storage Controllers

 Intel

®

C612 chipset with 10 x 6 Gb/s SATA ports

 2 x single port SATA connectors
 2 x 4-port mini SAS HD connectors

 1 x eUSB 2x5 pin connector for 2mm low profile eUSB SSDs
 Intel RSTe 4.1 embedded software SATA RAID
 Intel Embedded Server RAID Technology 2 (ESRT2) 1.41 with optional RAID 5 key support
 Optional Hardware SAS RAID with RAID 0, 1, 5, 6, 10, 50, 60 support

5

Altos R380 F3 Specifications

Expansion slots

 Three riser slots provide:

 Riser slot 1:

 3-slot riser card: 2 x PCIe
 2-slot riser card: 1 x PCIe 3.0 x16 (x16 connector) and 1 x PCIe 3.0 x 8 (x8 connector)

 Riser slot 2:

 3-slot riser card: 2 x PCIe
 2-slot riser card: 1 x PCIe 3.0 x16 (x16 connector) and 1 x PCIe 3.0 x 8 (x8 connector)

 Riser slot 3:

 2-slot riser card: 1 x PCIe 3.0 ×8 (x8 connector) and 1 x PCIe 2.0 x 4 (x8 connector)
 1 x I/O module expansion slot
 1 x SAS RAID module expansion slot

Management

 Acer Smart Server Manager
 Embedded BMC controller with IPMI 2.0 compatibility
 System ID LED buttons, System Health LED
 Smart Console remote monitoring and optional KVM over IP management to OS level
 Optional Local Control Panel

®

3.0 ×8 (x16 connector) and 1 x PCIe® 3.0 ×8 (x8 connector), or

®

3.0 ×8 (x16 connector) and 1 x PCIe® 3.0 ×8 (x8 connector), or

BIOS

 UEFI BIOS
 SMBIOS 2.0

Deployment/Serviceability

 BIOS Update Tool
 IPMI Firmware Update Tool

Operating Systems

 Windows Server 2012 R2
 Red Hat Enterprise Linux 6.5
 SUSE Linux Enterprise Server 11 SP3
 VMware ESXi

™

5.5

Graphics

 Integrated 2D video controller
 16 MB DDR3 memory

Chassis/Form Factor

 2U rack-optimized

6

Dimensions
750 W SKU

439 (W) x 769 (D) x 89 (H) mm (17.25 x 30.25 x 3.5 inches)

1100 W SKU

439 (W) x 793.8 (D) x 89 (H) mm (17.25 x 31.25 x 3.5 inches)

System inlet temperature
Operating

10° - 35° C (50° - 95° F)

Non-operating

-40° - 70° C (-40° - 158° F)

Relative humidity

Non-operating

50 - 90 %

Acoustics

Idle

LWAd

< 7.0 BA

Operating

LWAd

< 7.0 BA

Power

Rated Steady –state
power

750 W or 110 W

Altos R380 F3 Specifications

Power Supply

 1+0/1+1 redundant, hot-swappable power supply units. Three power supply options:

 750 W 80 PLUS
 1100 W 80 PLUS

®

Platinum-certified AC power supply

®

Platinum-certified AC power supply

 750 W 80 PLUS® Gold-certified DC power supply

Security

 Administrator/user password
 Power-on password
 Setup password
 Device boot control
 Secure command line interface (SSH)
 Secure browser interface (Secure socket layer - SSL support)
 Secure IPMI LAN interface (Authentication, Integrity, and Confidentiality algorithm)

Regulatory Compliant Standards

EMC

 FCC (Class A)
 CE (Class A)
 BSMI (Class A)
 CCC

Safety

 MET
 CB

Environmental Specifications

7

Riser
Slot

Riser Card
Type

Location

Connector

Type

Bus
Width1

Voltage

CPU2

Add-in Card Form
Factor

1

3-slot Riser
Card
Top Slot

x16

PCIe® Gen3

x8

3.3V 1 Full height/Full length

Middle Slot

x16

PCIe® Gen3

x8

3.3V 1 Full height/Full length

Bottom Slot

x8

PCIe® Gen3

x8

3.3V 1 Full height/Half length

2-slot Riser
Card

Top Slot

x16

PCIe® Gen3

x16

3.3V 1 Full height/Full length

Bottom Slot

x8

PCIe® Gen3

x8

3.3V 2 Full height/Half length

2

3-slot Riser
Card
Top Slot

x16

PCIe® Gen3

x8

3.3V 2 Full height/Full length

Middle Slot

x16

PCIe® Gen3

x8

3.3V 2 Full height/Full length

Bottom Slot

x8

PCIe® Gen3

x8

3.3V 2 Full height/Half length

2-slot Riser
Card

Top Slot

x16

PCIe® Gen3

x16

3.3V 2 Full height/Full length

Bottom Slot

x8

PCIe® Gen3

x8

3.3V 2 Full height/Half length

3

Low profile
Riser Card

Top Slot

x8

PCIe® Gen2

x4

3.3V 2 Low-profile

Bottom Slot

x8

PCIe® Gen3

x8

3.3V 2 Low-profile

Altos R380 F3 Specifications

Technical specifications

PCIe® specifications

The primary I/O bus for the main board is PCIe Gen3. The following table lists the characteristics of the PCI-E bus
segments. Details about each bus segment follow the table.
NOTE: The signaling bit rate of PCI Express is 8.0 Gbit/s one direction per lane for Gen 3.

NOTE:

1. Indicates the number of physical electrical lanes running to a PCIe

2. CPU 2 indicates that a second CPU is required to access that specific PCIe

®

connector.

®

slot.

3. If only one CPU is used:

It is not possible to use more than the top two slots on a 3-slot riser card or the top slot on a 2-slot riser
card (in riser slot 1).
Riser slot 2 and Riser slot 3 cannot be used.

Two riser card assemblies are used, one for slot 1, and a butterfly configuration for slots 2 and 3.

 Riser slot 1

 Riser slots 2 and 3

8

Item

Description

Controller

Intel® C612 Platform Controller Hub

Simultaneous drive transfer channels

10 onboard SATA ports

 AHCI SATA controller: 4 x SATA ports from the Mini SAS HD

connector and 2 x SATA ports on the server board

 AHCI sSATA controller: 4 x SATA ports from the Mini SAS HD

connector on the server board.

Max throughput per channel

6 Gb/s

Data transfer method

 Non-RAID mode
 RAID mode

Drive type supported

Serial ATA

RAID levels support

Default: Intel ESRT2 SATA RAID 0, 1, 5, 10 (RAID 5 requires key) or
Intel RSTe software SATA RAID 0, 1, 5, 10 (Windows OS support only)

RAID function support

 Supports multiple logical volumes
 Setup through ROM based Array Configuration Utility

Installation scripting support

RAID OS support

 Windows Server 2012 R2
 Red Hat Enterprise Linux 6.5
 SuSE Linux Enterprise Server 11

Additional features

 NCQ (Native Command Queuing)
 AHCI (Advanced Host Controller Interface)

Item

Description

Controller

Dual-port Intel® I350 Ethernet Controller (1GbE) or Dual-port Intel
X540 Ethernet Controller (10GbE)

Network interface

10Base-T / 100Base-TX / 1000Base-T / 10GBase-T

Compatibility standards

 IEEE 802.3 Ethernet interface for 10BASE-T
 IEEE 802.3ab Ethernet interface for 1000BASE-T
 IEEE 802.3u Ethernet interface for 100BASE-TX
 IEEE 802.3an Ethernet interface for 10GBASE-T

Altos R380 F3 Specifications

Riser card options below, up to three can be installed

 Riser slots 1 and 2

 Riser slot 3

Onboard storage specifications

Onboard LAN specifications

9

Item

Description

Manageability

 NC-SI, SMBus
 PXE, iSCSI boot

Virtualization acceleration

 Virtual Machine Device Queues (VMDq)
 PCI-SIG SR-IOV implementation

Connector

RJ-45

Supported cable type

X540 (10GbE): CAT-6/CAT-6A
I350 (1GbE): CAT-5/CAT-5e

Item

Description

Supported memory types

 Registered DDR4 1600 / 1866 / 2133 MHz
 Load Reduced DDR4 1600 / 2133 MHz
 ECC-enabled
 Integrated on-die thermal sensors (TROD)

NOTE: Acer does not qualify mixed memory configurations of
memory type, capacity or make.

Population

 Farthest fill first rule on any channel (populate blue slot /

Slot 1 first)

 Install DIMMs in order (CPU-1: Channels A, B, C and D; CPU-

2: Channels E, F, G and H)

 Only remove DIMM blanks when populating memory in that

slot

 Maximum of 8 ranks can be installed on any one channel
 Do not mix DIMM types (RDIMM or LRDIMM) and frequencies

or latencies within or across CPUs

Population per CPU by DIMM type listed below.
NOTE: Support for 16 / 32 / 64 GB DIMMs may vary by regional
availability.
A CPU must be populated for memory to be read.

Altos R380 F3 Specifications

Memory specifications and population

Memory support and population

10

Altos R380 F3 Specifications

Independent mode:

• Also known as performance mode, each DDR channel is addressed individually via burst lengths of 8

bytes.

• All CPUs support SECDED ECC with x8 DRAMs.

• All CPUs support SDDC with x4 DRAMs.

Lockstep mode:

• Also known as RAS mode, each pair of channels shares a Write Push Logic unit to enable lockstep.

• Channels are paired together as a domain. For CPU1, channels A and B, and channels C and D. For

CPU2, channels E and F, and channels G and H.

• All CPUs support SDDC with x4 or x8 DRAMs.

Memory RAS mode:

• RAS mode that require matching populations.

• Same slot position across channels must hold the same DIMM type (ranks, banks, rows and column)

Intra-Socket Memory Mirroring mode:

• For mirroring mode, the memory image in channel A is maintained the same as channel C and channel

B is maintained the same as channel D. Therefore, the effective size of memory is reduced by one-half.

11

2D Mode
2D Video Mode Support

8 bpp

16 bpp

24 bpp

32 bpp

640x480

X X X

X

800x600

X X X X 1024x768

X X X

X

1152x864

X X X

X

1280x1024

X X X X 1600x1200**

X X

Altos R380 F3 Specifications

• The DIMM configuration in mirrored channels must be identical. Channel A & channel C with identical

DIMMs and also channel B & channel D with identical DIMMs. The DIMM type, size, manufacturer should

be the same.

Rank Sparing mode:

• An unused spare rank is reserved on each channel. The spare rank is used to copy the contents of a failing

rank on the channel to keep a system working when a rank starts to fail. The reserved rank is not able to be
used before the other rank fail.

Memory Identification

Generally, there are some memory information printed on the label of DIMM, but different vendor may have
different format. For example:
4 GB 2R×4 PC4-14900R xx xx xxx

1. Density

 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB

2. Rank

 1R = Single Rank
 2R = Dual Rank
 4R = Quad Rank

3. Bit Organization

 This platform supports ×4 and ×8
 Note: It’s not recommend to mix DIMM with different bit organization in one system

4. Speed

 PC4 – 12800 => DDR4-1600
 PC4 – 14900 => DDR4-1866
 PC4 – 17000 => DDR4-2133

Graphics Specifications

Emulex Pilot-III Server Management Controller

Memory: 16 MB dedicated

Main Features

 Integrated Graphics Core with 2D Hardware accelerator
 DDR-3 memory interface with 16MB memory
 Supports all display resolutions up to 1600 x 1200 16bpp @ 60 Hz
 High speed Integrated 24-bit RAMDAC
 Single lane PCIe host interface running a Gen1 speed

Supported video modes

12

Loading

100%

50%

20%

10%

Minimum efficiency

91%

94%

90%

82%

Output power

10% load

20% load

50% load

100% load

Power factor

>0.65

>0.80

>0.90

>0.95

Parameter

Min

rated

Max

Start up Vac

Power off Vac

110 Vac

90 Vrms

100-127 Vrms

140 Vrms

85 Vac ± 4 Vac

75 Vac ± 5 Vac

220 Vac

180 Vrms

200-240 Vrms

264 Vrms

Frequency

47 Hz

50/60 Hz

63 Hz

Loading

Holdup time

750 W

70%

12 msec

1100 W

70%

10 msec

Loading

100%

50%

20%

10%

Minimum efficiency

88%

92%

88%

80%

Parameter

Min

Rated

VMax

DC voltage

-40.5 Vdc

-48 Vdc / -60 Vdc

-75 Vdc

Input current

24A

12.5A

Loading

Holdup time

70%

0.2 msec

Altos R380 F3 Specifications

Power specifications

750 W / 1100 W AC Platinum-certified power supply

Efficiency

Power factor

AC input voltage range

AC line holdup time

AC Line Inrush

Shall not exceed 55 A peak

750 W DC Gold-certified power supply

Efficiency

DC input voltage

DC holdup time

Acer server software utilities

Smart Console with optional iKVM management

Web-based management utility to simplify system management with embedded BMC, system monitoring and
alerting, event handling, remote power control and KVM-over-IP. Smart Console is OS independent and offers
virtual media through floppy, ODD, and removable disk.

Note:

 The integrated BMC has support for basic and advanced server management features. Basic management

feature are available by default. Advanced management features are enabled with the addition of an
optionally installed RMM (Remote Management Module) module.

 Two concurrent web sessions from up to two different users is supported.

13

Memory type

Registered / Load Reduced DDR4 ECC memory

Capacities

8 / 16 GB DIMMs Registered
32 GB DIMMs Load Reduced

DIMM number

24

Max memory

768GB (LRDIMM) or 384 GB (RDIMM)

Note: 32GB LRDIMM availability may vary by region.

Altos R380 F3 Specifications

Smart Server Manager

Offers 24-7 monitoring for system health and performance.

 Delivers proactive event management features including system event logging, event handling from e-mail

and SNMP Trap (PET) alerting

 Monitors onboard hardware, operating systems and virtual machines
 Allows remote control from KVM and Power control
 Satisfies management in web-based UI, role-based administration, and automated management scripts
 Remote firmware deployment and scheduled updates
 Customizable BIOS settings and deployment to networked nodes

Available options

Processors (up to 2)

Intel® Xeon® processor (Fourteen Core)

 E5-2697 v3 (35 MB L3 cache, 2.6 GHz, DDR4 2133/1866/1600 MHz, 145 W)
 E5-2695 v3 (35 MB L3 cache, 2.3 GHz, DDR4 2133/1866/1600 MHz, 120 W)

Intel® Xeon® processor (Twelve Core)

 E5-2690 v3 (30 MB L3 cache, 2.6 GHz, DDR4 2133/1866/1600 MHz, 135 W)
 E5-2680 v3 (30 MB L3 cache, 2.5 GHz, DDR4 2133/1866/1600 MHz, 120 W)
 E5-2670 v3 (30 MB L3 cache, 2.3 GHz, DDR4 2133/1866/1600 MHz, 120 W)
 E5-2650L v3 (30 MB L3 cache, 1.8 GHz, DDR4 2133/1866/1600 MHz, 65 W)

Intel® Xeon® processor (Ten Core)

 E5-2660 v3 (25 MB L3 cache, 2.6 GHz, DDR4 2133/1866/1600 MHz, 105 W)
 E5-2650 v3 (25 MB L3 cache, 2.3 GHz, DDR4 2133/1866/1600 MHz, 105 W)

Intel® Xeon® processor (Eight Core)

 E5-2640 v3 (20 MB L3 cache, 2.6 GHz, DDR4 1866/1600 MHz, 90 W)
 E5-2630 v3 (20 MB L3 cache, 2.4 GHz, DDR4 1866/1600 MHz, 85 W)
 E5-2630L v3 (20 MB L3 cache, 2.0 GHz, DDR4 1866/1600 MHz, 55 W)

Intel® Xeon® processor (Six Core)

 E5-2643 v3 (20 MB L3 cache, 3.4 GHz, DDR4 2133/1866/1600 MHz, 135 W)
 E5-2620 v3 (15 MB L3 cache, 2.4 GHz, DDR4 1866/1600 MHz, 85 W)
 E5-2609 v3 (15 MB L3 cache, 2.9 GHz, DDR4 1600 MHz, 85 W)
 E5-2603 v3 (15 MB L3 cache, 1.6 GHz, DDR4 1600 MHz, 85 W)

Intel® Xeon® processor (Quad Core)

 E5-2637 v3 (15 MB L3 cache, 3.5 GHz, DDR4 2133/1866/1600 MHz, 135 W)

Memory

14

Hard drives

Type

Interface, bandwidth

Capacities (RPM)

Enterprise SATA 3.5”

6 Gb/s

500 GB (7.2K)
1 TB (7.2K)
2 TB (7.2K)
3 TB (7.2K)
4 TB (7.2K)
6 TB (7.2K)

Enterprise SAS 3.5”

6 Gb/s

1 TB (7.2K)
2 TB (7.2K)
3 TB (7.2K)
4 TB (7.2K)
6 TB (7.2K)

Enterprise SAS, 2.5”

6 Gb/s

300 GB (15K)
300 GB (10K)
450 GB (15K)
450 GB (10K)
600 GB (15K)
600 GB (10K)
900 GB (10K)

1.2 TB (10K)

1.8 TB (10K)

Optical drive

Type

Slimline Super-Multi

RAID support upgrades

Model

Port number

RAID support

ESRT2 SW SATA RAID 5 Activation Key

0, 1, 5, 10

Intel

®

RAID SSD Cache with Fast Path I/O

8-port 12Gb SAS RAID Module
(LSI 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

8 internal ports

0, 1, 5, 6, 10, 50, 60

4-port 12Gb SAS RAID Module
(LSI 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

4 internal ports

0, 1, 5, 6, 10, 50, 60
8-port 12Gb SAS Entry Level RAID
Module (LSI 3008)

8 internal ports

0, 1, 1E, 10, JBOD mode

8-port (external) 12Gb SAS RAID Card
(LSI 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

8 external ports

0, 1, 5, 6, 10, 50, 60

4-port (internal)/4-port (external) 12Gb
SAS RAID Card
(LIS 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

4 internal ports + 4 external
ports

0, 1, 5, 6, 10, 50, 60
8-port 12Gb SAS RAID Card
(LSI 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

8 internal ports

0, 1, 5, 6, 10, 50, 60

4-port 12Gb SAS RAID Card
(LSI 3108 ROC, 1GB DDR3, supports
Super-capacitor Module)

4 internal ports

0, 1, 5, 6, 10, 50, 60

Altos R380 F3 Specifications

15

Model

Port number

Bandwidth

Intel® Ethernet Server Adapter I350-T2

2 (RJ-45)

1 Gb/s

Intel® Ethernet Converged Network Adapter X540-T1

1 (RJ-45)

10 Gb/s

Intel® Ethernet Converged Network Adapter X540-T2

2 (RJ-45)

10 Gb/s

Intel® Ethernet Converged Network Adapter X520-DA2*

2 (SFP+)

10 Gb/s

Intel® Ethernet Converged Network Adapter X520-SR1*

1

10 Gb/s

Intel® Ethernet Converged Network Adapter X520-SR2*

2

10 Gb/s

Intel® Ethernet Converged Network Adapter X520-LR1*

1

10 Gb/s

Ethernet I/O Module Intel® I350-AE4 GbE

4 (RJ-45)

1 Gb/s

Ethernet I/O Module Intel® X540-BT2 10GbE

2 (RJ-45)

10 Gb/s

Intel® 82599EB Ethernet I/O Module

2 (SFP+)

10 Gb/s

Intel® XL710-QDA1 Ethernet I/O Module*

1 (QSFP+)

40 Gb/s

Intel® XL710-QDA2 Ethernet I/O Module*

2 (QSFP+)

40 Gb/s

Model

Port number

Bandwidth

FDR InfiniBand* ConnectX-3* I/O Module (Single Port)

1 (FDR)

56 Gb/s

FDR InfiniBand* ConnectX-3* I/O Module (Dual Port)

2 (FDR)

56 Gb/s

Model

Function

Remote Management Module Activation Key

Enables remote iKVM

Local Control Panel

Enhances the manageability

Altos R380 F3 Specifications

Ethernet network cards and I/O modules

*Note: Intel’s 10GbE and 40GbE cards vary in terms of their connector type.
Note: All cards marked (I/O module) indicate the card is inserted in the I/O module connector on the node. It does

not use the standard PCIe slot

InfiniBand

Note: All cards marked (I/O module) indicate the card is inserted in the I/O module connector on the node. It does
not use the standard PCIe slot

Management module

Service and support

Acer Servers offer a comprehensive service suite to take care of daily IT needs. Users can select the 3-year
standard warranty or choose extended warranties and services.

In a continuing effort to improve the quality of our products, information in this document is subject to change
without notice. Images shown are only representations of some of the configurations available for this model.
Availability may vary depending on region.

© 2015. All rights reserved.

Microsoft and Windows are registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel® Corporation.

NOTE: Extension warranty services may vary by country. Please contact Acer authorized resellers for more
information.

16