Accton Technology SSAC300 User Manual
Quick Start Guide
The 802.11a/ac/b/g/n Wireless Access Points include these models:
◆
ECW3320 — 802.11b/g/n 2.4 GHz stand-alone AP
◆
ECW3320-C — 802.11b/g/n 2.4 GHz cloud-based AP
◆
ECW3320-L — 802.11b/g/n 2.4 GHz controller-based AP
◆
ECW5320 — 802.11a/ac/b/g/n dual-band stand-alone AP
◆
ECW5320-C — 802.11a/ac/b/g/n dual-band cloud-based AP
◆
ECW5320-L — 802.11a/ac/b/g/n dual-band controller-based AP
802.11a/ac/b/g/n Wireless Access Points
ECW3320, ECW3320-C, ECW3320-L, ECW5320, ECW5320-C, ECW5320-L
The ECW3320/ECW3320-C/ECW3320-L/ECW5320/ECW5320-C/ECW5320-L AP
includes its own built-in features for mounting the unit to a wall or suspended
ceiling T-rail.
Note:
For Safety and Regulatory information, refer to the Safety and Regulatory
Information document included with the AP.
Caution:
The planning and installation of the AP requires professional personnel
that are trained in the installation of radio transmitting equipment. The user is
responsible for compliance with local regulations concerning items such as
antenna power, use of lightning arrestors, grounding, and radio mast or tower
construction. Therefore, it is recommended to consult a professional contractor
knowledgeable in local radio regulations prior to equipment installation.
Follow these steps to install the AP:
1. Unpack the AP Unpack the AP and check the package contents.
◆ 802.11a/ac/b/g/n Wireless Access Point
◆ AC power adapter
◆ Ceiling-mount accessory
◆ Four adhesive foot pads
◆ Documentation — Quick Start Guide (this guide) and Regulatory and Safety
Information
www.edge-core.com
– 1 –
E082014-CS-R01
150200000882A
Quick Start Guide
2
1
1
2
1
2
3
123
2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling
T-rail.
.
Mounting on a Wall
Set two screws in the wall 116 mm (4.57 in.) apart.
Slide the AP’s wall mounting slots down onto the screws so that the unit is secure.
.
Mounting on a Ceiling T-rail
Attach the included ceiling-mount accessory to the base of the AP.
Position the AP’s ceiling-mount clip holders on either side of the T-rail.
Turn the AP until the two clips lock the AP to the T-rail.
– 2 –
Loading...