ABUS BW8085 Service Manual

Wired Motion Detector 360°

Art. no. BW8085

Microprocessor-controlled PIR sensor with 360° detection range

• High room exploitation

• Detection diameter: 13 m diameter at 4 m height

• Walk-test function

• Tamper protection

•

Page 1 of 2

The Xevox 360° is a motion sensor with one PIR sensor. It reacts to heat movement and reports it to the alarm panel. Installed on the ceiling, this sensor monitors the whole room. With a detection range of 360°, these sensors have the complete room under control. The aperture angle of the lens is 110°. For example: If the Xevox 360° is installed at a height of 4 meters, it monitors a cone-shaped space with a diameter of 13 meters at ground level. At 1.2 meters above the ground, the diameter of the monitored area is 8 meters. It is particularly suitable for monitoring large, underground corridors. The optimum installation location of the Xevox 360° is the center of the ceiling. The intruder's possible direction of movement should be at right-angles to the sensor. Do not install the sensor near to sources of heat. By means of a jumper, you can change the sensitivity of the Xevox 360° motion sensor. This way you can define the number of pulses that have to be detected before the sensor opens the alarm relay.

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 11/2019

Wired Motion Detector 360°

Art. no. BW8085

Technical Data:

VdS class none Dimensions (HxD) 135x27 mm Connections NC, 50 mA, 24 V DC Width 27 mm Type of detection Heat detection Adjustable sensitivity Automatic Detection range of detector

8 m (m) Housing material ABS Height 135 mm Pulse selector Yes Power consumption 0,135 W Max. operating

55 °C temperature

Page 2 of 2

Installation location Ceiling Net weight 0,112 kg Tamper monitoring Yes Sensor type Dual PIR element Voltage monitoring Yes DC voltage supply 9-16 V Status display Yes Power consumption 15 mA Creep zone Yes White light filter Yes