AbsolutAire UT17 User Manual
Series UT17
Professional Plumbing
Portable Utility - 1/8" Spherical Solids Handling
www.cranepumps.com
DISCHARGE ...............................3/4" G.H.T. Male, Vertical
LIQUID TEMPERATURE .............77°F (25°C) Continuous
MOTOR HOUSING .....................Thermoplastic
PUMP STRAINER ........................Thermoplastic
IMPELLER: Design ....................2 Vane, Semi-open
Material ..................Thermoplastic
SHAFT ........................................Steel
O-RINGS ................................Buna-N
HARDWARE ................................Stainless Steel
SEAL: Design ....................Single Mechanical, Type 6
Material ...................Carbon/Ceramic/Buna-N
CORD ENTRY ..............................15 ft. (4.5m) Cord with plug and pressure
Gromment for sealing and strain relief
UPPER BEARING ........................Single Row, Ball, Oil Lubricated
LOWER BEARING .......................Single Row, Ball, Oil Lubricated
MOTOR Design .....................Air-Filled
Insulation.................Class B
SINGLE PHASE ...........................Permanent Split Capacitor (PSC).
Includes Thermal Overload Protection
in Motor
Manual - Submersible
Sump Pumps
Series: UT17
1/6 HP, 3450RPM, 60Hz
C US
CSA 108
UL 778
LR16567
DESCRIPTION:
GENERAL PURPOSE PUMP FOR RESIDENTIAL AND
LIGHT INDUSTRIAL SUMP APPLICATIONS
A Crane Co. Company
Testing is performed with
water specifi c gravity of 1.0
@ 68˚F (20˚C), other fl uids
may vary performance
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
SECTION
PAGE
DATE
A
13
8/06
Series UT17
Portable Utility - 1/8" Spherical Solids Handling
Manual - Submersible
Sump Pumps
Professional Plumbing
www.cranepumps.com
inches
(mm)
MODEL NO PART NO HP VOLT/PH Hz RPM
(Nom)
UT17 113824 1/6 120/1 60 3450 2.0 15 ft. (4.5m) 18/3 SJTW
FULL
LOAD
AMPS
CORD
LENGTH
CORD
SIZE
CORD
TYPE
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION II HAZARDOUS LOCATIONS.
3.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS I DIVISION I HAZARDOUS LOCATIONS.
4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HA VING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
SECTION
PAGE
DATE
A
14
8/06
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Loading...