AbsolutAire TGC User Manual

FEATURES

BASIC WIRING AND DIMENSIONS

Page 1 of 3Airotronics - Delay On Make - TGC CUBE

Cube Relay

TGC Timers

TGC series Cube Relay Delay on
Make timers are a unique
combination of digital CMOS timing
circuitry with a relay output in a
compact 2" x 2" configuration. For
users of solid-state timers, these
units provide the same functional
performance as plug-in relay timers,
but at significant cost savings.

Timing Mode

Application of input voltage to the timer starts the
time delay. At the end of the delay period, the
load is energized. To reset, remove the input
voltage to the timer.

? High current carrying capacity up to 20

amps

?

Transient protected

? 100% Load isolation

?

No leakage in N.O. position

?

No heat sinking required

? Available in any time delay period required

? Digital CMOS timing
? No minimum load required

?

Totally encapsulated for
protection from harsh

environments

? 100% Operational testing

before shipping

?

1/18/2007http://www.airotronics.com/delayonmake/tgc_cube.htm

SPECIFICATIONS

120 VAC

230 VAC

Variable,

SPDT

SPDT

(N.O.)

Input Voltage:

?

VDC: 12, 24 or 48

? VAC: 24, 48, 120 or 230, 50/60 Hz

Time Delay:

?

Timing Mode: Delay On Make

? Type: Digital CMOS
? Time Range: 0.2 seconds to 24 hours

?

Time Adjustments: Factory-fixed time
period; variable, with adjustments on
timer, or terminals for external resistor
or potentiometer

Repeatability: ±0.5%
Setting Accuracy:

? Fixed time period: 10% of nominal

time.

? Variable time range: +15% -5% max.

time, -10% min. time

Relay Life Expectancy:

?

Mechanical: 20 million operations

?

Electrical: 100,000 operations

? Contact Material: Silver nickel, gold

plated, or silver cadmium oxide

Protection:

? Polarity Protection: All DC units have

reverse polarity protection

? Transient Protection: 18 joules

?

Dielectric Strength: 1800V RMS 60 Hz

Temperature Ranges:

? Storage: -25° C to +85° C
? Operating: -40° C to +85° C

Page 2 of 3Airotronics - Delay On Make - TGC CUBE

Reset/Recycle Time: 25 milliseconds
Initiate Time: 6 milliseconds or less
Relay Output:

Form:

? Standard – SPST N.O.

?

Optional – SPST N.C., SPDT

SELECTION PROCEDURE

Mode of
Operation

Series

Input
Voltage

1.

2.

3. 24 VAC

Physical Data:

?

? Connection & Termination: 0.25" quick

Time Ranges

VARIABLE TIME PERIODS
0001 0.5 to 1 sec.

Mounting: Surface with one #8 screw

connects

Time
Adjustment

A.

integral,
knob on

Relay
Output
Form

1.

2.

Options

H Heavy

duty, 10
amps (6

1/18/2007http://www.airotronics.com/delayonmake/tgc_cube.htm