AbsolutAire SP33 User Manual
www.cranepumps.com
I&O Manual
DISCHARGE ...................................1½” NPT, Female, Vertical
LIQUID TEMPERATURE ................104°F (40°C) Continuous
MOTOR HOUSING ............................Cast Iron
PUMP BODY & STRAINER ..............Thermoplastic
IMPELLER: Design ...................... 10 Vane vortex, with pump out vanes on back
side. Balanced, ISO G6.3
Material ..................... Cast Iron
SHAFT ..............................................Stainless Steel
O-RINGS ..................................Buna-N
HARDWARE ......................................300 Series Stainless Steel
PAINT ................................................. Air Dry Enamel
SEAL: Design ....................... Single Mechanical, Type 21
Material ...................... Carbon/Ceramic/Buna-N
Hardware -300 Series Stainless
CORD ENTRY .................................... 10 ft. (3m) or 20 ft. (6m) Cord with plug and
Pressure Gromment for sealing and strain relief
UPPER BEARING .............................. Single Row, Ball, Oil Lubricated
LOWER BEARING ............................. Single Row, Ball, Oil Lubricated
MOTOR: Design ....................... Oil Filled
Manual & Automatic, Submersible Sump /Effl uent
Insulation.................Class B
SINGLE PHASE ................................. Permanent Split Capacitor (PSC).
Includes thermal overload protection in motor
LEVEL CONTROL:
SP33 ..........................None
SP33A ........................ Wide Angle, Mechanical, 10 ft (3m) cord
or 20 ft (6m) cord
SP33VF ...................... Vertical Float, PVC, Snap Action,
10 ft (3m) cord or 20 ft. (6m) cord
SP33D ........................ Diaphragm switch, pressure operated,
Snap Action, normally open, 10 Ft. (3m) cord
MINUMUM SUMP DIA:
SP33A ........................18" (457mm)
SP33, SP33VF
SP33D ........... ............ 11" (279mm)
NOTE ..................................................GFCI Compatible to Comply with NEC
210.8 (A)
Series SP33
1/2" Spherical Solids Handling
Sump & Utility Pumps
Series: SP33,
1/3HP, 3450RPM, 60Hz
C US
CSA 108
UL 778
LR16567
DESCRIPTION:
GENERAL PURPOSE PUMP FOR RESIDENTIAL AND
LIGHT INDUSTRIAL SUMP APPLICATIONS
A Crane Co. Company
Testing is performed with
water specifi c gravity of 1.0
@ 68˚F (20˚C), other fl uids
may vary performance
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
SECTION
PAGE
DATE
1A
3
9/10
Series SP33
I&O Manual
1/2" Spherical Solids Handling
Manual & Automatic, Submersible Sump /Effl uent
Sump & Utility Pumps
Model: SP33
www.cranepumps.com
inches
(mm)
Model: SP33VF
Model: SP33AModel: SP33D
MODEL NO PART NO HP VOLT/PH Hz RPM
(Nom)
SP33 112547 1/3 120/1 60 3450 B 5.8 10 ft. (3m) 18/3 SJTOW / SJTW
SP33X 112548 1/3 120/1 60 3450 B 5.8 20 ft. (6m) 18/3 SJTOW / SJTW
SP33A 112549 1/3 120/1 60 3450 B 5.8 10 ft. (3m) 18/3 SJTOW / SJTW
SP33AX 112550 1/3 120/1 60 3450 B 5.8 20 ft. (6m 18/3 SJTOW / SJTW
SP33VF 112551 1/3 120/1 60 3450 B 5.8 10 ft. (3m) 18/3 SJTOW / SJTW
SP33VFX 112552 1/3 120/1 60 3450 B 5.8 20 ft. (6m 18/3 SJTOW / SJTW
SP33D 118371 1/3 120/1 60 3450 B 5.8 10 ft. (3m) 18/3 SJTOW / SJTW
NEMA
START
CODE
FULL
LOAD
AMPS
CORD
LENGTH
CORD
SIZE
CORD
TYPE
IMPORTANT !
1.) PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
2.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS HAZARDOUS LOCATIONS.
3.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE
WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN
SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
SECTION
PAGE
DATE
1A
4
1/11
A Crane Co. Company
USA: (937) 778-8947 • Canada: (905) 457-6223 • International: (937) 615-3598
Loading...