AbsolutAire L02-02-0101 User Manual

L02

-02-010

1 – Wall Mounted

Product Description

The L02-02-0101 relative humidity sensor converts a resistance to
a linear 0 to 10 VDC output.

The Advanced Ceramic Technology design overcomes the limita­tions of other resistance-based humidity sensors that utilize water
soluble polymer coatings. The Advanced Ceramic Technology en­ables these sensors to fully recover from condensation. This allows
the sensor to maintain its accuracy over a longer period of time.
Despite its accuracy, the Advanced Ceramic Technology sensor
and related circuitry is economical.

Field calibration is achieved by toggling either the increment or
decrement dip switch. Each toggle will allow for a +/- 0.5% RH in­crease or decrease.

Accuracy is maintained over the operating range, using a thermis­tor for temperature compensation. Precision production tolerances
maintain sensor interchangeability to within +/- 3% nominal without
recalibration.

Each L02-02-0101 humidity sensor is calibrated at 3 different
points, using an NIST Traceable Temperature/Humidity chamber.

Technical Data

RH Sensor

Supply Voltage
Operating Temp
Operating RH
Output
Interchangeability
Long Term Stability
Accuracy @ 77oF
Response Time
Saturated Response Time
Sensitivity
Repeatability
Hysteresis

• 500 Ohm Load: +18 to 36 VDC / 24 VAC

• -10 to 160oF (-23.3 to 71oC)

• 0 to 100% RH

• 0-10 VDC

• +/- 3% from 20 to 95% RH

• < +/- 3% RH nominal

• Less than 2% RH Drift / 5 Years

• 30 seconds for 63% Step

• 10 minutes for 63% Step

• 0.1% RH

• 0.5% RH

• Less than 0.4% RH

Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969

Please contact Lynxspring for more information about this product

L02

-02-010

1 – Wall Mounted

Device Detail

RH Sensor

Ordering Information

Model # Description

L02-02-0101 Wall Mount Relative Humidity Sensor

Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969

Please contact Lynxspring for more information about this product