AbsolutAire L02-01-0112 User Manual
L02
-01-
011
2 -
Product Description
The L02-01-0112 temperature sensor uses a 10K Ohm (Type
III) thermistor sensor. This sensor provides a predictable output over a specified temperature range to meet the manufacturer’s required input value. The L02-01-0112 can be used in
many different applications.
Thermistors offer high accuracy and interchangeability over a
wide temperature range. The thermistors higher resistance
relative to Platinum RTD’s creates a larger signal with the
same measuring current, negating most lead wire resistance
problems and eliminating the need for signal conditioners.
Temp Sensor – Bullet Probe 1”
PICTURE NOT AVAILABLE
Features and Application Highlights
This product is are offered as a Bullet Probe type temperature
sensor. Primary uses include strap-on applications to measure
water temperature in condensers and evaporator coils.
Technical Data
Output Dissipation Constant 3 mW/oC
Temperature Range -40 to 302oF (-40 to 150oC)
Accuracy +/- 0.2oC (0 to 70oC)
Interchangeability +/- 0.2oC (0 to 70oC)
Operating Humidity 0 to 90% RH non-condensing
10K Ohms @ 77oF (25oC) Type III
Stability +/-0.13oC
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969
L02
-01-
011
2 –
Device Detail
Temp Sensor - Bullet Probe 1”
Ordering Information
Model # Description
L02-01-0112 Bullet Probe 1” – (10K Ohm, Type III)
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969
Loading...