AbsolutAire L02-01-0106 User Manual
Wall Mounted Temp. Sensor w/ Setpoint
Product Description
The L02-01-0106 is a Wall Mounted thermistor temperature sensor. The
10K Ohm Type III thermistor will provide a pre-dictable output over a specifi ed temperature range to meet the required input value. The L02-01-0106
is mounted in an attractive Beige colored plastic enclosure.
Thermistors offer high accuracy and interchangeability over a wide operating temperature range.
This unit is offered as a room temperature sensor with Set Point confi gura-
tion. The setpoint is a linear 10K slide potenti-ometer that is Direct Acting,
with a 55 to 85 indication sticker.
The thermistors higher resistance relative to Platinum RTD’s, creates a
larger signal with the same measuring current, ne-gating most lead wire
resistance problems and eliminating the need for signal conditioners.
L02-01-0106
Technical Data
Sensor Output • 10K Ohms @ 77oF(25oC) Type III
Temperature Range • -40 to 302oF (-40 to 150oC)
Interchangeability • +/- 0.2oC (0 to 70oC)
Sensor Accuracy • +/- 0.2oC (0 to 70oC)
Sensor Stability • +/- 0.13oC
Dissipation Constant • 3 mW / oC
Operating Humidity • 0 to 90% RH non-condensing
Setpoint Indication • 55 to 85
Setpoint Pot Action • Direct Acting
Setpoint Range • 0 to 10K Ohms +/- 10%
Lynxspring, Inc. 877-649-59698900 State Line Road, Suite 220, Leawood, KS 66206
Please contact Lynxspring for more information about this product
NiagaraAX is a registered trademark of Tridium, Inc.
version: January 3, 2005
Device Detail
L02-01-0106
Wall Mounted Temp. Sensor w/ Setpoint
Ordering Information
Model # Description
L02-01-0106 Wall Mounted Temperature Sensor with Setpoint (10K Ohm, Type III)
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 877-649-59698900 State Line Road, Suite 220, Leawood, KS 66206
NiagaraAX is a registered trademark of Tridium, Inc.
version: January 3, 2005
Loading...