AbsolutAire L01-01-1201 User Manual

L01

-01-1201 – 56 Kps

Product Description

AutoDial/Answer Modem

The L01-01-1201 56K Baud Dial-Up modem (JCOM-56KM) is
an optional communication module that features Auto­dial/Autoanswer capabilities with one RJ-11 connector for a
phone line.

The modem is installed in Option Slot 1, where it operates as
COM1. This disables the RS-232 base serial port (DB-9 con­nector) on the JENEsys™ controller.

If a JCOM-56KM is installed, and the JENE-PC1000 “mode
jumper” is put in “Serial Shell” position, the JENEsys™ base
RS-232 port becomes active immediately following a reboot.
This allows an RS-232 connection to the “serial shell” for de­bugging purposes. The JCOM-56KM is inoperative during
this period.

To re-enable the modem, you must put the mode jumper
back in the “Normal” position, and reboot the JENEsys™
again.

Technical Data

Baud Rate
Wiring

• 56 Kps

• Standard RJ-11 telephone cable to the connector on the JCOM-56KM, and the other end to a working

PSTN (dialup) telephone receptacle

Ordering Information

Model # Description

L01-01-1201 JENEsys™ - Communication Module – Optional Modem-56 Kps module

Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969

Please contact Lynxspring for more information about this product