AbsolutAire L01-01-0901 User Manual
L01
-01-
0901
–
LON
Product Description
Communication Module
The L01-01-0901 LON Communication Module (JCOMLON1) is an optional communication module that features
FTT-10A Lon (LonWorks) adaptor with a 2-position removable screw-terminal connector plug.
The JCOM-LON1 can be installed in either Option Slot 1 or 2.
Two LEDs are visible on the top of the LON Card option card
(cover must be removed from JENE-PC1000). These LEDs
are included on the top label of the LON Card.
• RX (green) – Receive, indicates that another Lon-
Works device is transmitting a message.
• TX (yellow) – Transmit, indicates that the JENE-
PC1000 is transmitting a message on the LON
Trunk.
an
Technical Data
•
Communications
Wiring
LonWorks FTT-10, 78k baud
•
Connect the LonWorks FTT-10 communications wiring to the 2 position connector of the
LON Card. Note that polarity is not a factor in FTT-10 wiring.
Ordering Information
Model # Description
L01-01-0901 JENEsys™ - Communication Module – Optional LON Communication Module
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 8900 State Line Road, Suite 220, Leawood, KS 66206 877-649-5969
Loading...