AbsolutAire JENE-PCLCD Installation Manual
r
Product Description
JENE-PCLCD
JENEsys™ PC series LCD
Operator’s Panel
JENE-PCLCD, JENEsys™ PC series LCD Operator’s Panel,
is designed to be used together with the JENEsys™ PC1000
or JACE 2/6.
The operator panel gives the user access to parameters
without communicating directly to the BAS system.
Additionally, it is used to monitor status, adjust set points and
perform other functions as required by the user. All values are
displayed with explanatory text in the alphanumeric display
window.
The JENE-PCLCD has a display with unli mited rows (6 visible rows available for points with a scrolling interface) of approximately 25 characters per row and seven push buttons.
Installation
On the JENEsys™ PC1000 or JACE 2/6, remove the cover,
battery and the blanking end plate. Connectivity to the
JENEsys™ PC1000 or JACE 2/6 is accomplished via JENEPCLCD-Card , which plugs into the 30 pin connector of the
JENEsys™ PC1000 (see figure at right). Once the LCD card
is plugged in, plug in the cable and add the battery and
blanking end plate back in. Connect the data cable and add
the housing cover back on.
(see figure on page 2)
Technical Data
30 Pin Connecto
Number of Dots…………………………………………………….………………….……..…128 x 64
Module Dimension………………………………………………..…93.0(W) x 70.0(H) x 13.5Max(T)
Viewing Area:……………………………………………………….……………… 71.7(W) x 39.0(H)
Active Area……………………………………………………….……………… 66.52(W) x 33.24(H)
Dot Size………………………………………………………….………………… 0.48(W) x 0.48(H)
Dot Pitch……………………………………………………….…………………… 0.52(W) x 0.52(H)
Viewing Angle…………………………………………….……………………… +-40 degress H & V
Viewing Direction………………………………….…………………………12 O'CLOCK Superwide
Display.................8 rows per page (7 available for points) 2 columns of ~25 characters per row
BackLight……………………………………………………………………….…. LED(Yellow-Green)
LCD Type………… .STN-YELLOW(Positive/Transflective)STN-BLUE(Negative/Transflective)
Contrast Ratio…………………………………………………………………………………………5:1
Operating Voltage…………………………………………………………………………... 5V+/-0.25V
Supply Voltage…………………………………………………………………………... 12VDC ± 10%
Current (LED Backlight Off)……………………………………………………………… …… 32mA
Current (LED Backlight On)………………………………………………………………… .. 190mA
Dimensions…………………………………………Narrow side: 4", Long side: 6.3", Height: 3.4"
Mounted on JENEsys™ PC1000 or JACE 2/6 – Narrow side: 4", Long side: 6.3", Height: 4.1”
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 8900 State Line Road, Suite 150, Leawood, KS 66206 877-649-5969
JENE-PCLCD
JENEsys™ PC series LCD
Operator’s Panel
Device Detail
is used to move the cursor upward in a menu list and
change values on a selected point
is used to move the cursor downward in a menu list and
change values on a selected point
is used to select a line, or to set the different adjustable
values (enter key)
is used to jump to the first screen, or to null an overridden
point.
is used to jump to the last screen, or to cancel while
updating a point without saving.
Application
To set up the JENE-PCLCD, follow these steps:
- Open WorkPlace™ or ProBuilder™
- Through WorkPlace™ or ProBuilder™, connect to
the station the LCD is on
- Once the station is open, log in to the station and
drop the SerialLcdNetwork onto the drivers
- Place the SerialLcdPointExtension on control points
- Select the SerialLcdNetwork and run Update
Interface Action
is used to page to the previous screen, or to move to
the previous digit when editing numerics or strings.
is used to page to the next screen, or to move to the
next digit when editing numerics or strings.
Features and Functions
- Unlimited rows
- 6 visible rows available for points with a scrolling interface
- Approximately 25 characters per row
- Seven push buttons
- Security Passcode
- Device Timeout
- Backlight
- Scroll Indicators
- Point override capabilities
Remove the battery assembly (as shown) on the
JENEsys™ PC1000 to install the JENE-PCLCD.
Ordering Information
Model Description
JENE-PCLCD Small operator panel designed to be used together with the JENEsys™ PC1000 or
JACE 2/6.
Please contact Lynxspring for more information about this product
Lynxspring, Inc. 8900 State Line Road, Suite 150, Leawood, KS 66206 877-649-5969
Loading...