Abocom WCU5102 User Manual

High-Gain 802.11b/g Wireless USB Adapter with Rotatable Connector Design
The WCU5102 enables you to connect your desktop computer or laptop easily to any 802.11b/g network via a USB connection. With a clever USB connector design, which allows you to swivel and rotate to almost any angle plus the Hi-Gain antenna technology, the WCU5102 not only provides a highly concentrative capability to have a wireless connection of quality but also extends the wireless connection distance up to three times further! A compact base stand goes with the Wireless LAN USB Adapter is a convenient option for the desktop use. What’s even more marvelous is the built-in LED signal strength indicator, which pinpoints the strongest signal available within your wireless LAN! The WCU5102, a small and compact wireless device, is definitely the best choice to carry around for enabling the wireless environment!
FEATURES
Works with both IEEE 802.11b and 802.11g (both at 2.4 GHz) for compatibility & mobility Up to 54Mbps wireless data transfer rate Support USB 2.0 Ad-Hoc or Infrastructure mode Soft AP feature creates AP (Access Point) function Supports Turbo Mode to enhance the data transfer speed within the specific wireless network Supports WMM function to meet the multi-media data bandwidth requirement Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x) functions for high level of
security

LED Indicator

Link: Blue Active: Orange Signal Strength:
(Weak) 1.Red 2.Orange 3.Yellew 4.Bul e 5.Bule (Better)

Power Requirement

TX consumption: 390mA (Typical) at 5V RX consumption: 220mA (Typical) at 5V Standby consumption: 95mA(Typical) at 5V

Physical specification

Weight: 35g Dimension: 110mm (L) × 34mm (W) × 11mm (H)

Supported OS

Windows 98SE/Me/2000/XP

EMI Certification

FCC Part 15.247 in US EN300328 and EN301489-17 in Europe

SPECIFICATION

Standard IEEE 802.11g and 802.11b Host Interface USB 2.0 USB Connector Type Swivel-and-rotate USB2.0 connector Antenna Connector Integral patch antenna Frequency Range 2.400GHz ~ 2.4835GHz
2.412~2.462GHz (Canada, FCC) / 11 Channels
Operating Frequency / Channel
Modulation Technique
Security
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK Transmit power 18dBm ± 2dBm
Data Rate
Sensitivity
Working Mode
2.412~2.484GHz (Japan, TELEC) / 14 Channels
2.412~2.472GHz (Euro, ETSI) / 13 Channels Orthogonal frequency division multiplexing (OFDM)
Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK) 64/128bit WEP
WPA WPA2
802.1x and 802.11i
802.11g - 54, 48, 36, 24, 18, 12, 9 and 6Mbps with auto-rate fall back
802.11b - 11, 5.5, 2, and 1Mbps with auto-rate fall b ack 54Mbps: -69dBm
11Mbps: -85dBm Ad-Hoc
Infrastructure
Power Consumption
Operation Temperature
Humidity Regulatory Approval FCC, CE
Dimensions 110mm (L) × 34mm (W) × 11mm (H)
LED Indicator
OS Support Windows 98SE/Me/2000/XP Throughput
Continuous transmission mode: 390mA at 5VDC (Typical) Continuous Reception mode: 220mA at 5VDC (Typical)
Operating Temperature: 0~55 ambient temperature Storage Temperature: -20~70 ambient temperature
Operating humidity: 90% maximum (non-condensing) Storage humidity: 90% maximum (non-condensing)
Link: Blue ACTIVE: Orange Signal strength: (Weak) 1.Red 2.Orange 3.Yellow 4.Blue 5.bule (Better)
22Mbps@ 54Mbps
5.5Mbps@ 11Mbps