Abocom UFT128S User Manual

USB LAN ISDN

Quick Installation Guide

M73-APO08-360

Table of Contents

PARTS NAMES AND FUNCTIONS.................1

HARDWARE INSTALLATION........................ 2

NSTALLING THE

I

USB LAN ISDN.....................2

Connecting the USB Cabling ........................2

Connecting to an ISDN Network...................2

Connecting to the LAN Network....................2

SOFTWARE INSTALLATION ......................... 3

INDOWS

W

INDOWS

W

INDOWS

W

INDOWS

W

98SE I

NSTALLATION

2000 I

NSTALLATION

ME I

NSTALLATION

XP I

NSTALLATION

.........................3

.........................9

.........................12

..........................16

Parts Names and Functions

1. USB Cable: connects the USB LAN ISDN
to the USB host port of your computer.

2. USB Port: connects to the USB cable’s
square end.

3. LAN Port: connects to a LAN Cable.

4. ISDN Port: connects to an ISDN Cable.

5. Link Indicator: glows green when
10/100M Fast Ethernet is linked.

6. B1 Indicator: glows green when the
transmitting / receiving data in 64 Kbps
speed mode.

7. B2 Indicator: glows green when the
transmitting / receiving data in 128 Kbps
speed mode.

- 1 -

HARDWARE INSTALLATION

Installing the USB LAN ISDN

Connecting the USB Cabling

1. Insert the USB cable’s square end into the

adapter’s USB port.

2. Insert the rectangular end of the USB cable

into the USB host port on your PC.

Connecting to an ISDN Network

1. Connect one end of an ISDN cable into the

adapter’s ISDN port.

2. Connect the other end of the ISDN cable

into S/T port on NT1 ISDN device.

Connecting to the LAN Network

1. Connect one end of the LAN cable into the
adapter's LAN port.

2. Connect the other end of the LAN cable to
a Hub.

- 2 -

SOFTWARE INSTALLATION

Windows 98SE Installation

1. Once the device is connected, windows

98SE will automatically detect the device
and appear the following figure. Click Next
to continue.

2. Select Search for the best driver for your

device (Recommended) and click Next.

3. Insert the device driver into your CD-ROM.

Select Specify a location, direct Windows
98SE to the location where the driver stored
(e.g. E:\USB) and click Next. Windows
98SE will search for the suitable driver for
the software installation need.

4. Click Next. Windows 98SE will start

copying necessary files onto your system.

- 3 -

5. In ISDN Configuration, click Next.

6. Select the switch protocol that your

telephone company uses and click Next.

7. Enter the telephone numbers that your ISP

provided and click Next.

- 4 -