Tmax-Molded Case Circuit Breakers
T7 1200A Frame
AC Circuit Breakers and Switches
3 and 4 Pole
Motor Circuit Protectors
Higher Performances in Less Space
Field Installable Accessories and Trip Units
Dimensions 3P Fixed Version 10.55H x 8.26W x 6.06D
Weight
Compliance with Standards
UL 489
CSA C22.2 No.5.1
IEC 60947-2
Standards
EC directive:
– “Low Voltage Directives” (LVD) no. 73/23 EEC
– “Electromagnetic Compatibility Directive” (EMC) no.89/336 EEC
Interrupting ratings (RMS sym. kAmps) T7
Continuous Current Rating 1200
Number of Poles 3-4
AC
240V 65 100 150
480V 50 65 100
600V 25 50 65
The ABB Quality System complies with the international ISO
9001 - 2000 Standard (model for quality assurance in design,
development, construction, and installation and service) and
with the equivalent European EN ISO 9001 and Italian UNI EN
ISO 9001 Standards
21.4 (Ibs)
S H L
Company Quality Systems and Environmental Systems
The new Tmax series has a hologram on the front, obtained
using special anti-imitation techniques, which guarantees the
quality and that the circuit breaker is an original ABB product.
Attention to protection of the environment and to health and
safety in the work place is another priority commitment for ABB
and, as conrmation of this, the company environmental management system has been certied by RINA in 1997, in conformity with the international ISO 14001 Standard. This certication has been integrated in 1999 with the Management System
for Health and Safety in the workplace, according to OHSAS
18001 (British Standards), obtaining one of the rst certication
of integrated management System, QES (Quality, Environment,
Mounting
Fixed
Drawout
Connections
Busbar connection or compression lugs
Pressure-type terminals for bare cables
Rear connections
Safety) issued by RINA. ABB - the rst industry in the electromechanical section in Italy to obtain this recognition - thanks
to a revision of the production process with an eye to ecology
has been able to reduce the consumption of raw materials
and waste from processing by 20%. ABB’s commitment to
safeguarding the environment is also shown in a concrete
way by the Life Cycle Assessments of its products carried out
directly by the ABB Research and Development in collaboration with the ABB Research Center. Selection of materials,
processes and packing materials is made optimizing the true
environmental impact of the product, also foreseeing the possibility of its being recycled.
Trip Unit
PR231/P, PR232/P, PR331DS, and PR332DS/P electronic trip unit
Auxiliary Devices for Indication and Control
• Auxiliary contacts - AUX
• Undervoltage release - UVR
• Shunt trip - SOR
• Terminal covers
• Padlock provision - PLL
• Direct rotary handle - RHD
• Key lock - KLF
• Early auxiliary contact - AUE
• Transmitted rotary handle - RHE
• Front extended terminal - EF
• Front terminal for copper-aluminum - FC CuAl
• Front extended spread terminal – ES
• Rear orientated terminal - R
• Phase separators
• Residual current relay (IEC Only)
Publication LV114
No. 1SXU210114D0201
Printed in USA, April, 2008
ABB Inc.
1206 Hatton Road
Wichita Falls, TX 76302
For more information and
the location of your local
eld ofce please go to
www.abb-control.com