ABB ABTH11 Quick Start Guide

Activate the fan whenever you like.
Welcome to your new Thermostat
Finally... a wireless thermostat that is easy to
operate at home, at the ofce, from anywhere.
Tap to activate your heater.
Tap to activate your air-conditioning.
www.abb.com/freeathome
Function Overview
SYMBOL DESCRIPTION
TEMP VALUES - The large number shows the current temp and the small number the setpoint temp. Another option is to display the outside temp.
Tap on a symbol to activate a function.
It is 72° and the thermostat is heating.
It is 72° and cooling. The fan is manually on. It is in energy­saving ECO mode.
ARROWS - Tap up or down to change the setpoint temp.
SETTINGS - Tap for settings mode, tap again to exit.
FAN - The fan can be set to ON or AUTO mode. By default,
it is in AUTO mode. Tap to turn on the fan.
HEATING - Tap to enable and disable the heating mode.
HEATING INDICATOR - When red the device is heating.
COOLING - Tap to enable and disable the cooling mode.
COOLING INDICATOR - When blue the device is cooling.
ECO - When operator is away, the device can be set to
save energy. The setpoint is decreased for heating or increased for cooling. Tap to activate and deactivate
ON/OFF - Tap to turn the Thermostat OFF/ON, and to turn OFF/ON all appliances that are connected to it. Only the protection function remains active.
ACCESSORY- Activate/deactivate another function
(humidier or dehumidier).
AUXILIARY HEATING - This is used only if a heat pump is controlled. If symbol is on, auxiliary heating is enabled
.
.
It is 72°. Press and hold the big number for 3 seconds. You can now clean the screen.
PROTECTION - Indicates heating/cooling was turned on automatically to protect the HVAC from overload and the home from extreme hot or cold temperatures.
For a complete system manual, please go to
www.abb.com/freeathome
ABBPRN1050040 Rev. B1 / 05.09.2018
Loading...