AAEON FOX-81D User Manual
LCD Display FOX-81D
FOX-81D
8.4" Heavy-Duty Touch Display
IP65 and IEC 60945 Compliant
Anti-Moisture with Optical Bonding
Technology
5-wire Resistive Touch Screen
FOX-81D Manual 3
August 2012
rd
Ed
LCD Display FOX-81D
Copyright Notice
This document is copyrighted, 2012. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i
LCD Display FOX-81D
Acknowledgments
Intel
IBM, PC/AT, PS/2 are trademarks of International Business
®
is registered trademarks of Intel® Corporation.
Machines Corporation.
Microsoft
®
Windows is a registered trademark of Microsoft®
Corporation.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
SiS is a trademark of Silicon Integrated Systems Corp.
VIA is a trademark of VIA Technology, Inc.
All other product names or trademarks are properties of their
respective owners.
ii
LCD Display FOX-81D
Packing List
The LCD monitor comes with the following standard parts shown as
below. Check and make sure they are included and in good condition.
If anything is missing or damaged, contact the dealer immediately.
1 FOX-81D
1 Utility CD-ROM
Contains User’s Manual (in PDF format), Drivers and
Utilities
1 VGA Cable with waterproof connector
1 Water proof connector for DC-in (Female)
1 RS-232 Cable with waterproof connectors
If any of these items are missing or damaged, you should cont act y our
distributor or sales representative immediately.
iii
LCD Display FOX-81D
Safety & Warranty
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any DC outlet before cleaning.
Do not use liquid or spray detergents for cleaning. Use a damp
cloth.
4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.
5. Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage.
6. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.
7. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
8. All cautions and warnings on the equipment should be noted.
9. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
10. Never pour any liquid into an opening. This could cause fire or
electrical shock.
11. Never open the equipment. For safety reasons, only qualified
service personnel should open the equipment.
iv
LCD Display FOX-81D
12. If any of the following situations arises, get the equipment
checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to
work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
13. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4°F) OR ABOVE 70°C (158° F). IT MAY
DAMAGE THE EQUIPMENT
.
FCC
Cautio
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received
including interference that may cause
undesired operation.
n:
It may cause the danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type
recommended by the manufacturer.
v
LCD Display FOX-81D
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Display
有毒有害物质或元素
部件名称
印刷电路板
及其电子组件
外部信号
连接器及线材
外壳 × ○ ○ ○ ○ ○
液晶模块 × ○ ○ ○ ○ ○
触控模块 × ○ ○ ○ ○ ○
电源 × ○ ○ ○ ○ ○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质触控模块为选购品。
铅
(Pb)汞 (Hg)镉 (Cd)
× ○ ○ ○ ○ ○
× ○ ○ ○ ○ ○
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
vi
LCD Display FOX-81D
Contents
Chapter 1 General Information
1.1 Introduction................................................................ 1-2
1.2 Features.................................................................... 1-3
1.3 General Specification................................................ 1-4
1.4 Dimension ................................................................. 1-6
Chapter 2 Hardware Installation
2.1 Before Unpacking...................................................... 2-2
2.2 Checking The Accessories........................................ 2-3
2.3 Connecting Cables....................................................2-4
2.4 DC-IN 9~30V Connecter........................................... 2-6
2.5 Serial Port Connector For Touch Screen..................2-6
2.6 VESA Wall Mounting.................................................2-7
2.7 Waterproof LAN Connector Installation.....................2-8
Chapter 3 On Screen Display Control
3.1 On Screen Display (OSD) Board Description. ..........3-2
3.2 OSD Main Menu: Push The MENU Keys..................3-3
3.3 Select Input Source...................................................3-4
3.4 Contrast/ Brightness- Submenu................................3-5
3.5 Geometry Menu.........................................................3-6
3.6 Color Temperature- Submenu .................................. 3-7
3.7 RGB Color- Submenu. ..............................................3-8
vii
LCD Display FOX-81D
3.8 Language- Submenu................................................. 3-9
3.9 Auto Config- Submenu..............................................3-10
3.10 Mode Resolution- Submenu....................................3-11
3.11 Exit Menu- Submenu............................................... 3-12
Chapter 4 Touch Screen Driver Installation
4.1 Introduction................................................................ 4-2
4.2 Resistive Touchscreen Control Board.......................4-3
4.3 Installing Driver for Windows
® XP/ Windows® 7 / Linux
.........................................................................................4-5
viii
LCD Display FOX-81D
Chapter
1
General
Information
Chapter 1 General Information 1-1
LCD Display FOX-81D
1.1 Introduction
Thank you for purchasing of the Industry Touch Display with IP65
and IEC 60945 compliant - a marvelous contribution of cutting edge
technology.
The LCD monitor has been designed with serious thoughts to
present the best performance for most applications. Symbol of
elegance, its compact and slim profile is well suited in working
locations where space is at a premium.
Fully compatible with PC system, the LCD monitor provides full
interface for all sorts of related standards. Supported by “Plug &
Play” complying with DDC1/DDC2B, installing the LCD monitor is
absolutely trouble free.
The On Screen Display menu provides user a convenient interface
to make right adjustment for optimum display performance.
Chapter 1 General Information 1-2
LCD Display FOX-81D
1.2 Features
8.4" TFT LCD, 800 x 600, 450 Nits, LED Backlight
IP65 and IEC 60945 Compliant For The Whole Unit
Anti-Moisture And Clearer Visibility With Optical Bonding
Technology
LED Backlight With 450 Nits High Brightness
Rugged IP65 Aluminum Die Casting Design
Reliable On Screen Display (OSD) Button
Wide Power Input Range: 9-30V DC With M12 Water Proof
Connector
VESA 75 Standard
Chapter 1 General Information 1-3
LCD Display FOX-81D
1.3 General Specification
Type
Size
Construction
Mounting
Input signal
Control
Power Supply
Dimension
TFT LCD 16.2 M Color with LED Backlight
8.4" TFT LCD
IP65 Aluminum Die Cast Front Bezel
VESA
VGA
4 Quick Keys on the front bazel
External power adapter
10.47” (W) x 7.56” (H) x 2.36” (D)
(266mm x 192mm x 60mm)
Power Input
Brightness
MTBF
Contrast Ratio 600:1
Viewing Angle
Resolution
Display Modes
9V~30V DC
450 cd/m
50,000 hrs
160°(H)/140°(V)
800 x 600
Full Screen in 800 x 600, 640 x 480, 640 x
400 Modes
Color
16.2 M
2
(TYP.)
Touchscreen
Type
Resolution
Light
transmission
Controller
Chapter 1 General Information 1-4
5-wire resistive
2048 x 2048
83%
RS-232
LCD Display FOX-81D
Environmental
Operating
Temperature
Storage
Temperature
Vibration
Shock
EMC
32°F~ 122°F (0°C to 50°C)
-4°F~ 158°F (-20°C to 70°C)
1g rms/5-500Hz/random operation
20 G peak acceleration (11 msec. duration)
CE/FCC Class A
Chapter 1 General Information 1-5
LCD Display FOX-81D
1.4 Dimension
Chapter 1 General Information 1-6
LCD Display FOX-81D
Chapter
2
H
Chapter 2 Hardware Installation 2-1
ardware
Inst
allation
LCD Display FOX-81D
2.1 Before Unpacking
It is very important to place the LCD Display in a suitable
environment.
The surface for placing the LCD Display should be
stable and level.
Make sure the place has good ventilation, and out of
direct sunlight; away form sources of excessive dust,
dirt, heat, water, moisture and vibration.
Chapter 2 Hardware Installation 2-2
LCD Display FOX-81D
2.2 Checking The Accessories
Please open the accessory box. You will find one VGA cable, one
RS-232 cable and one power connector. All of three cables comes
with M12-type connectors.
VGA cable: for the display
RS-232 cable: for the touch control
Power connector: customers can customize the power source
: the power input must be between 9V to 30V
Note
Chapter 2 Hardware Installation 2-3
LCD Display FOX-81D
2.3 Connecting Cables
Connecting the Power cable, VGA cable and RS-232 cable onto the
FOX-81D and computer, and screw the three cables tightly on the
FOX-81D as below.
Before connecting the FOX-81D to the computer, remember to turn
off the computer first. After each connector on the computer is
secured, turn on the computer.
Note:
1. The "Surge Protection" is already implemented
2. If it doesn't screw tightly, the water-proof function may not work.
The machine will get damaged when liquid pours
Chapter 2 Hardware Installation 2-4
Loading...