AAEON FOX-12D User Manual

LCD Display FOX-12D

FOX-12D

12.1" Heavy-Duty Touch Display

IP67 and IEC 60945 ed.4 Compliant
Anti-Fog Design, LCD + TS Bonding

Technology

5-wire Resistive Touch Screen

FOX-12D Manual 2

nd

Ed

July 2012

LCD Display FOX-12D

Copyright Notice

This document is copyrighted, 2012. All rights are reserved. The
original manufacturer reserves the right to make improvements to
the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the
original manufacturer assumes no responsibility for its use, nor for
any infringements upon the rights of third parties, which may result
from its use.

The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its
accuracy, AAEON, assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information
contained herein.

AAEON reserves the right to make changes in the product design
without notice to its users.

i

LCD Display FOX-12D

Acknowledgments

 Intel
 IBM, PC/AT, PS/2 are trademarks of International Business

®

is registered trademarks of Intel® Corporation.

Machines Corporation.

 Microsoft

®

Windows is a registered trademark of Microsoft®

Corporation.

 RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
 C&T is a trademark of Chips and Technologies, Inc.
 UMC is a trademark of United Microelectronics Corporation.
 ITE is a trademark of Integrated Technology Express, Inc.
 SiS is a trademark of Silicon Integrated Systems Corp.
 VIA is a trademark of VIA Technology, Inc.

All other product names or trademarks are properties of their
respective owners.

ii

LCD Display FOX-12D

Packing List

The LCD monitor comes with the following standard parts shown as
below. Check and make sure they are included and in good condition.
If anything is missing or damaged, contact the dealer immediately.

 1 FOX-12D
 1 Utility CD-ROM

Contains User’s Manual (in PDF format), Drivers and
Utilities

 1 VGA Cable with waterproof connector
 1 Water proof connector for DC-in (Female)
 1 RS-232 Cable with waterproof connectors

If any of these items are missing or damaged, you should cont act y our
distributor or sales representative immediately.

iii

LCD Display FOX-12D

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any DC outlet before cleaning.
Do not use liquid or spray detergents for cleaning. Use a damp
cloth.

4. For pluggable equipment, the power outlet must be installed near
the equipment and must be easily accessible.

5. Put this equipment on a reliable surface during installation.

Dropping it or letting it fall could cause damage.

6. Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet.

7. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.

8. All cautions and warnings on the equipment should be noted.

9. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.

10. Never pour any liquid into an opening. This could cause fire or

electrical shock.

11. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

iv

LCD Display FOX-12D

12. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to

work according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.

13. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -10° C (14°F) OR ABOVE 70°C (158° F). IT MAY
DAMAGE THE EQUIPMENT

.

FCC

Cautio

This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received
including interference that may cause
undesired operation.

n:

It may cause the danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type
recommended by the manufacturer.

v

LCD Display FOX-12D

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Display

有毒有害物质或元素

部件名称

印刷电路板

及其电子组件

外部信号

连接器及线材

外壳 × ○ ○ ○ ○ ○
液晶模块 × ○ ○ ○ ○ ○
触控模块 × ○ ○ ○ ○ ○

电源 × ○ ○ ○ ○ ○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：
一、此产品所标示之环保使用期限，系指在一般正常使用状况下。
二、上述部件物质触控模块为选购品。

铅

(Pb)汞 (Hg)镉 (Cd)

× ○ ○ ○ ○ ○

× ○ ○ ○ ○ ○

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

vi

LCD Display FOX-12D

Contents

Chapter 1 General Information

1.1 Introduction................................................................ 1-2

1.2 Features.................................................................... 1-3

1.3 General Specification................................................ 1-4

1.4 Dimension ................................................................. 1-6

Chapter 2 Hardware Installation

2.1 Before Unpacking...................................................... 2-2

2.2 Checking The Accessories........................................ 2-3

2.3 Connecting Cables....................................................2-4

2.4 DC-IN 9~30V Connecter........................................... 2-6

2.5 Serial Port Connector For Touch Screen..................2-6

2.6 VESA Wall Mounting.................................................2-7

2.7 Waterproof LAN Connector Installation.....................2-8

Chapter 3 On Screen Display Control

3.1 On Screen Display (OSD) Board Description. ..........3-2

3.2 OSD Main Menu: Push The MENU Keys..................3-3

3.3 Select Input Source...................................................3-4

3.4 Contrast/ Brightness- Submenu................................3-5

3.5 Geometry Menu.........................................................3-6

3.6 Color Temperature- Submenu .................................. 3-7

3.7 RGB Color- Submenu. ..............................................3-8

vii

LCD Display FOX-12D

3.8 Language- Submenu................................................. 3-9

3.9 Auto Config- Submenu..............................................3-10

3.10 Mode Resolution- Submenu....................................3-11

3.11 Exit Menu- Submenu............................................... 3-12

Chapter 4 Touch Screen Driver Installation

4.1 Introduction................................................................ 4-2

4.2 Resistive Touchscreen Control Board.......................4-3

4.3 Installing Driver for Windows

® XP/ Windows® 7 / Linux

.........................................................................................4-5

viii

LCD Display FOX-12D

Chapter

1

General

Information

Chapter 1 General Information 1-1

LCD Display FOX-12D

1.1 Introduction

Thank you for purchasing of the Industry Touch Display with IP67
and IEC 60945 ed.4 compliant - a marvelous contribution of cutting
edge technology.

The LCD monitor has been designed with serious thoughts to
present the best performance for most applications. Symbol of
elegance, its compact and slim profile is well suited in working
locations where space is at a premium.

Fully compatible with PC system, the LCD monitor provides full
interface for all sorts of related standards. Supported by “Plug &
Play” complying with DDC1/DDC2B, installing the LCD monitor is
absolutely trouble free.

The On Screen Display menu provides user a convenient interface
to make right adjustment for optimum display performance.

Chapter 1 General Information 1-2

LCD Display FOX-12D

1.2 Features

 IP67 Waterproof & Marine IEC 60945 ed.4 Compliant
 12.1” 500 Nits XGA LED Backlight (FOX-12DHTT)
 12.1” 1000 Nits XGA LED Backlight (FOX-12DSTT)
 Anti-Fog Design: LCD + TS Bonding Technology
 Brightness Adjustment
 Reliable On Screen Display (OSD) Button
 Wide Power Input Range: 9~30V DC With M12 Waterproof

Connector

 VESA 75/100 Standard

Chapter 1 General Information 1-3

LCD Display FOX-12D

1.3 General Specification

System

 Input Signal
 Control
 I/O Connector
 OS Support

Mechanical

 Construction
 Mounting
 Dimension

 Carton

Dimension

 Gross Weight
 Net Weight

Environmental

VGA
4 Quick Keys on the front bezel
VGA x 1
Windows

®

XP, Windows® 7, Linux Fedora

IP67 Sealed Aluminum Alloy Chassis
VESA 75/100

13.58’’ x 11.1’’ x 2.36’’ (345mm x 282mm x
60mm )

20.24’’ x 9.72’’ x 20.71’’ (514mm x 247mm x
526mm )

12.1 lb (5.5 Kg)

8.36 lb (3.8 Kg)

 Operating

Temperature

 Storage

Temperature

 Storage

Chapter 1 General Information 1-4

14°F ~ 140°F (-10°C ~ 60°C)

14°F ~ 158°F (-10°C ~ 70°C)

10%~95% @ 40°C; non-condensing

LCD Display FOX-12D

Humidity

 Vibration
 Shock
 EMC

Power Supply

 DC Input

LCD

 Display type
 Max Resolution
 Display Modes

 Max. Colors
 Luminance
 Viewing Angle
 Back Light
 Back Light MTBF

(hours)

1 g rms/ 5~500Hz/ Random operation
15 G peak acceleration (11 msec. Duration)
CE/FCC Class A, IEC 60945 ed.4

DC 9-30V

12.1" TFT-LCD
1024 x 768
Full screen in 1024x768, 800x600, 640x480,
640x400 modes

16.2M colors
HTT: 500 nits, STT: 1000 nits
HTT: 160°(H)/160°(V), STT: 160°(H)/140°(V)
HTT: LED, STT: LED
HTT: 50,000, STT: 60,000

Touchscreen

 Type
 Light

Transmission

 Lifetime (Times)

5-wire resistive
80%

35 million activations

Chapter 1 General Information 1-5

LCD Display FOX-12D

1.4 Dimension

345.0

60.7

AUTO

282.0

MENU

RS-232
TOUCH

POWER

VGA

FOX-12D

UNIT:MM

Chapter 1 General Information 1-6

LCD Display FOX-12D

Chapter

2

H

Chapter 2 Hardware Installation 2-1

ardware

Inst

allation

LCD Display FOX-12D

2.1 Before Unpacking

It is very important to place the LCD Display in a suitable
environment.

 The surface for placing the LCD Display should be

stable and level.

 Make sure the place has good ventilation, and out of

direct sunlight; away form sources of excessive dust,
dirt, heat, water, moisture and vibration.

Chapter 2 Hardware Installation 2-2

LCD Display FOX-12D

2.2 Checking The Accessories

Please open the accessory box. You will find one VGA cable, one
RS-232 cable and one power connector. All of three cables comes
with M12-type connectors.

VGA cable: for the display
RS-232 cable: for the touch control
Power connector: customers can customize the power source

: the power input must be between 9V to 30V

Note

Po

wer

Connector

VGA Cable

Chapter 2 Hardware Installation 2-3

RS-232 Cable