A4 Tech X-710, X-718 User Manual

SPEED Game Mouse

User’s Manual

Model(s): X-710 X-718

www.a4tech.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

l Reorient of relocate the receiving antenna.
l Increase the separation between the equipment and receiver.

l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

l Consult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1). this device may not cause harmful interference, and
(2). this device must accept any interference received, including interference that may cause undesired operation.

HOW TO CONNECT YOUR MOUSE

1. Locate an available USB mouse port on the back of your computer.

2. Insert the USB mouse connector into the USB port .

If you like to use the PS2 port (for the round PS/2 plug), you will need to plug the
USB connector with a PS2 adapter.

HOW TO CHANGE THE DPI SETTING OF SPEED GAME MOUSE

Click the button shown on the right figure to quickly shift
from 600-800-1200-1600-2000 DPI as the scroll wheel
changes color between shifts. You don’t need any driver
for this fabulous function!

MODEL: X-710

At Resolution: Scrolling Wheel

will change to:

400DPI Non
600DPI Green
800DPI Yellow

1000DPI Red

MODEL: X-718

At Resolution: Scrolling Wheel

will change to:

600DPI Non

800DPI Green
1200DPI Yellow
1600DPI Red
2000DPI Red & Yellow

coruscating

Recommend for: Suitable for Resolution of display

Slow-Speed and normal accuracy player
Medium-Speed and required average accuracy player
Fast Speed and required above average accuracy player
High-Speed and required above average accuracy player

Click 6th key to quickly shift from 400, 600, 800 to 1000 DPI

Recommend for: Suitable for Resolution of display

Slow-Speed and normal accuracy player
Medium-Speed and required average accuracy player
Fast Speed and required above average accuracy player

High-Speed and required pinpoint accuracy player
Extra High-Speed and required pinpoint accuracy player

（Recommend）

640×480

800×600
1024×768
1152×864

（Recommend）

800×600
1024×768
1152×864
1280×960

1280×1024

Click 6th key to quickly shift from 600, 800, 1200, 1600 to as high as 2000 DPI

STEP ONE: HOW TO INSTALL SMART-X7 SOFTWARE
***** For Windows Me / 2000 / 2003 / XP

1. MUST: Please uninstall any previous mouse driver before installing the Smart-X7

2. MUST: Make sure you have completely finished setting up your
mouse pad and mouse

3. Insert the included Compact Disc (CD) into your CD-ROM

4. Click “Install Driver”. Select model: X-710/718 Optical Mouse

5. Click the button on the right to install driver

6. Follow the on screen instruction to complete your installation

7. Restart your computer after the driver has been installed

8. You will see a mouse icon “ ” appear on the bottom right

of your task bar (near the clock area)

9. Double click on the mouse icon “ ” will bring you the mouse property (Image - Top: Mouse Properties Window)

Mouse Properties Window

10. If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then you

have successfully installed the Smart-X7 driver