A4 Tech PK-935 User Manual

ViewCam

User’s manual

Model :PK-935

www.a4tech.com

Contents page

Introduction 2
System’s Requirements 2
Package Include 2
USB PC Camera 3
Specification 4
Installing Camera’s Driver 4
Checking connection of your camera 13
Uninstalling Driver 13
VP-EYE program 16
Troubleshooting 24

1

l Introduction

Welcome to the World of Digital Imaging.
The following information will guide you to install and use the PC
Camera to its full capabilities.

l System’s requirements

Personal Computer, Laptop, Desktop, or IBM Compatible
Computer with Pentium 166MHz minimum, and with an active
USB (universal serial bus) port.
Windows 98/ME/2000/XP, CD-ROM drive, color monitor, mouse
and keyboard. For videoconference, Internet connection must
be equipped. Sound card with standard microphone input port.

2

l Package includes

PC Camera
(With USB cable and Mic. jack )

l USB PC Camera

Microphone

CD Installation Disc & User’s Guide

Snapshot Button

5-Layer Glass Lens

3

l Specification

30fps@640x480, @600x800, @320x240,

Image Sensor:
Frame Rate:

Lens:
View Angle:
Focus Range:
Exposure Control:
White Balance:
Still Image Capture
Res.:
Flicker Control:
Computer Port

1/4〃CMOS, 640×480pixels

@160x120
F=2.4, f=4.9mm
54 degree
Automatic focus, 3cm to infinity
Automatic
Automatic

800x600，640X480，352x288，320x240，176x144，
160x120

50Hz, 60Hz and None
USB port

l Installing camera’s driver

Driver’s Installation Instruction for Windows 98/ME/2000/XP

NOTE: Please Uninstall All Previous Installed WEBCAM BEFORE
Installing A4 TECH ViewCAM. DO NOT CONNECT A4 TECH
ViewCAM TO THE COMPUTER UNTIL ITS DRIVER IS INSTALLED!

4

1. Insert the included CD into the CD-ROM: The Auto-run
Menu Window will popup, move the mouse cursor to and
click on “Install viewCAM”.

2. Please select your ViewCAM model and click on the product
image to install (As the right image). Then dialogue box will
appear on the computer screen as below:

5

3. Follow the on screen instruction to complete the installation

process

4. When the Installation Process is completed

6

5. Click “Finish” to complete installation. Now, the shortcut

Amcap and Zoom images will appear on the computer

desktop

6. Plug the PC Camera’s USB cable to the computer’s USB

Port, and restart your computer.

Amcap Usage

After installation of view cam driver, you can pre-view image and
set the adjustments for the properties sheet through the image
application software which comes with the product.

Image-preview

Click button on the desktop and the Amcap image
application will pop-up or from “start” to “application” “A4TECH

USB PC Camera H”，and click “Amcap” by mouse the
application image will appear shown as below

7

8