4IPNET EAP210, OWL530 Users Manual

EAP210 or OWL530

Handbook

Quick Installation Guide

EAP210 or OWL530 Enterprise Access Point ENGLISH

This document is protected by USA copyright laws and other laws. Besides, the document is the property of 4IPNET, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from 4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations.

To download up-to-date version, please visit www.4ipnet.com.

Quick Installation Guide

EAP210 or OWL530 Enterprise Access Point ENGLISH

FCC CAUTION

This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

---Consult the dealer or an experienced radio/TV technician for help.

The device contains a low power transmitter which will send out Radio Frequency (RF) signal when transmitting. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Quick Installation Guide

1. Installation personal

4ipnet OWL530 is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.

2. Installation location

4ipnet OWL530 shall be installed at a location where the radiating antenna can be kept 20 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.

3. External antenna

Use only the antennas which have been approved by the applicant. The non-approved antenna(s)

EAP210 or OWL530 Enterprise Access Point ENGLISH

Professional installation instruction

may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of VZ9130002 limit and is prohibited.

4. Installation procedure

Please refer to user’s manual for the detail.

5. Warning

Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.

iii

Quick Installation Guide

EAP210 or OWL530 Enterprise Access Point ENGLISH

CE CAUTION

Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: OWL530

For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement.

• Radio: EN 300.328:

• Radio: EN 50392

• EMC: EN 301.489-1, EN 301.489-17,

• EMC: EN 55022 Class B, EN 55024:+ A1 + A2 including the followings:

EN 61000-3-2, EN 61000-3-3. EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11

• Safety: EN 60950-1 + A11,

Caution:

 This declaration is only valid for configurations (combinations of software, firmware, and hardware)

provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by 4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements.

European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range

2.400-2.4835 GHz. This equipment is intended to be used in all EU and EFTA countries. Outdoor use

may be restricted to certain frequencies and/or may require a license for operation. Contact your local regulatory authority for compliance.

Taiwan NCC Statement

根據 NCC 低功率電波輻射性電機管理辦法規定:

第十二條

第十四條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或

變更原設計之特性及功能。

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時應立即停用，並改善至

無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之擾。

Quick Installation Guide

EAP210 or OWL530 Enterprise Access Point ENGLISH

Preface Package Contents

4ipnet EAP210 or OWL530 is a high-end

802.1 1a/b/g/n 2.4GHz/ 5GHz MIMO Select able Dual Band Access Point (AP) designed to maximize deployment flexibility and feasibility for IT administrators.

The difference of EAP210 and OWL530 are the mounting method. EAP210 is a desktop device while OWL530 is designed to be pole-mount.

1. 4ipnet OWL530 x 1 or EAP210 x 1

2. Quick Installation Guide (QIG) x 1

3. CD-ROM

4. AC-DC Adaptor ( EAP210 only)

5. Power Sourcing Equipment (PSE) with AC cable x 1 (Optional)

6. Mounting Kit x 1 (OWL530 only)

7. Ground Cable x 1 (OWL530 only)

(with User’s Manual and QIG) x 1

Complying with the latest industrial wireless security standards that are required in the tightly secured enterprise network environments, the AP makes the wireless communication fast, secure and easy. It supports business-grade secure encryption -

802.1X and Wi-Fi Protected Access (WPA and WPA2) ; by pushing a purposely built button, the 4ipWES (Press-n-Connect) feature makes it easy to bridge wireless links of multiple OWL530s for forming a wider wireless network coverage.

EAP210 or OWL530 also features multiple ESSIDs with VLAN tags and multiple Virtual APs; great for enterprise applications, such as separating traffic from different departments using different ESSIDs. The PoE LAN port is able to receive power from Power over Ethernet (PoE) sourcing devices. Its

It is recommended to keep the original

packing material for possible future shipment when repair or maintenance is required. Any returned product should be packed in its original packaging to prevent damage during delivery.

metal case is IP68, which means that the is well suited to WLAN deployment in industrial environments.

This Quick Installation Guide provides instructions and reference materials to get you started with 4ipnet EAP210 or OWL530.

- 1 -

Quick Installation Guide

EAP210 or OWL530 Enterprise Access Point ENGLISH

Hardware Overview of EAP210

Front Panel

Figure 1 EAP210 Front Panel

Rear Panel

1 (1) 2 3

1 (2)4

Figure 2 EAP210 Rear Panel

- 2 -

+ 15 hidden pages

4IPNET EAP210, OWL530 Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual