Size:
7.56 Mb
Download

S55i/X55i

Multimedia Projector

Operator's Guide

Thank you for purchasing this projector.

WARNING ►Before using this product, please read the "Product Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

VGAand XGAare registered trademarks of International Business Machines Corporation.

Apple and Mac are registered trademarks ofApple Computer, Inc.

VESAand SVGAare trademarks of Video Electronics StandardAssociation.

Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

1

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Content

Content

About this manual

 

. 1

EASY Menu. . . . . . . . . . . . . . . . . .

25

Content . . . . . . . . . . . . . . . . . .

2

Aspect, Keystone, Mode, Brightness,

 

Projector features

3

Contrast, Color, Tint, Sharpness,

 

Whisper, Mirror, Reset, Filter time,

 

Preparations . . . . . . . . . . . . . .

3

Language,

 

About contents of package . . . . . . .

3

Go to advanced menu

 

Part names . . . . . . . . . . . . . . .

4

PICTURE Menu. . . . . . . . . . . . . . .

27

Projector . . . . . . . . . . . . . . . . . . . . .

4

Brightness, Contrast, Gamma,

 

Control buttons . . . . . . . . . . . . . . . .

6

Color temp, Color, Tint, Sharpness,

 

Remote control . . . . . . . . . . . . . . . .

6

Progressive, My memory

 

Setting up . . . . . . . . . . . . . . . .

7

IMAGE Menu. . . . . . . . . . . . . . . . .

30

Fastening the lens cover

7

Aspect, Over scan, V. position, H. position,

H. phase, H. size, Auto adjust execute

Arrangement

8

INPUT Menu

32

Adjusting the projector's elevator . . 9

Using the Security Bar. . . . . . . . . .

10

Color space, Component, Video format,

Connecting your devices. . . . . . . . .

11

Frame lock, Information

 

Connecting power supply . . . . . . .

14

SETUP Menu. . . . . . . . . . . . . . . . .

34

Remote control . . . . . . . . . . .

15

Keystone, Whisper, Mirror, Volume,

 

Putting batteries

15

Audio

 

SCREEN Menu

35

Using the remote control . . . . . . . .

16

Power on/off

17

Language, Menu position, OSD bright.,

Blank, Start up, MyScreen,

 

Turning on the power

17

 

MyScreen lock, Message

 

Turning off the power

17

 

OPTION Menu

38

Operating . . . . . . . . . . . . . . .

18

Adjusting the volume

18

Auto search, Auto off, Lamp time,

 

Filter time, Service

 

Temporarily muting the sound

18

 

Maintenance

40

Selecting an input signal . . . . . . . .

18

Searcting an input signal. . . . . . . .

19

Lamp . . . . . . . . . . . . . . . . . . . . . . .

40

Selecting an aspect ratio. . . . . . . .

19

Air filter . . . . . . . . . . . . . . . . . . . . .

42

Adjusting the zoom and focus . . . .

19

Other care . . . . . . . . . . . . . . . . . . .

44

Using the automatic adjustment feature .

20

Troubleshooting . . . . . . . . . .

45

Adjusting the position . . . . . . . . . .

20

Related messages. . . . . . . . . . . . .

45

Correcting the keystone distortions 21

Regarding the indicator lamps. . . .

46

Using the magnify feature . . . . . . .

21

Phenomena that may easily be

 

Freezing the screen. . . . . . . . . . . .

22

mistaken for machine defects . . . .

48

Temporarily blanking the screen . .

22

Specifications . . . . . . . . . . . .

51

Operating the computer screen. . .

23

Technical (English only)

 

Multifunctional settings . . . .

24

 

Using the menu function . . . . . . . .

24

(Pleaseseetheendofthisbook, althoughonlyinEnglish.)

2

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Projector features / Preparations

Projector features

This projector is used to project various computer signals as well as NTSC/PAL/ SECAM, Component (SD, HD) video signals onto a screen. It requires just a little space for installation and gets a large image from short distance.

High Brightness

Newly developed 180W UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in bright rooms.

Low Noise

WHISPER mode is available for reducing acoustic noise to realize quieter operation. It is perfect for use in low luminance rooms where low noise is more important than brightness.

Rich Connectivity

This projector has a variety of I/O ports. It can be easily connected to many signal sources like PC, DVD and so on. The rich connectivity provides you more options to make your presentation impressive.

Compact Body

Even with its many features, this projector is extremely compact and slim, which gives you more flexibility and usability to use it where you want.

Preparations

About contents of package

Your projector should come with the items shown below. Contact immediately your dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing materials. Use special caution for the lens part.

USB cable

S55i/X55i

RCA

RCA

 

Component cable

Video/Audio cable

 

Lens cover, Rivet and Strap

Soft case

3

 

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Part names

Part names

Projector

Lamp door (41) (Lamp unit is inside.)

Zoom ring (19)

Focus ring (19)

Vent (7) Lens (17)

Lens cover (3)

Control buttons (6)

Remote sensor (16) Speaker

Security bar (10) (Use for attaching a commercial anti-theft chain or wire.)

Elevator button (9)

Elevator foot (9) Front-Right side

Filter cover (42)

(Air filter and intake vent are inside.)

Bottom side

WARNING ►During use or immediately after use, do not touch around the lamp and vents of the projector. () It could cause a burn.

4

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Ports (See below.) Rear-Left side

CONTROL port (12) AUDIO-OUT port (12)

AUDIO IN2 L/R port (13) (In the default setting, the

AUDIO IN2 L/R port is the audio port for the VIDEO, S-VIDEO and COMPONENT VIDEO ports, however it is possible to change the settings. 34)

COMPONENT

Y

R

 

VIDEO ports (13)

 

 

 

AUDIO IN2

 

Y

 

 

CONTROL

CB/PB

 

 

CB/PB

L

AUDIO OUT

CR/PR

 

AUDIO IN1

CR/PR

 

VIDEO port (13)

 

 

VIDEO

 

 

 

 

 

 

S-VIDEO

 

S-VIDEO port (13)

AUDIO IN1 port (12)

(In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports, however, it is possible to change the settings. 34)

Part names

Power switch (17)

AC inlet (14)

Elevator button (9)

Elevator foot (9)

Vent (7)

Restart switch (*) (48) RGB IN1 port (12)

RGB IN2 /RGB OUT port (12) (Use the RGB IN OUT switch to select RGB IN2 or RGB OUT for this port.)

RGB IN2 port: Inputs the RGB signal from a PC.

RGB OUT port: When connected to a monitor, outputs the signal input via RGB IN1.

USB port (12)

RGB IN1

RGB IN2

USB

RGB OUT

 

K

Ports

RGB IN OUT switch (12)

Use this button to select either RGB IN2 or RGB OUT for the corresponding port. When this switch is not pushed in, RGB IN2 is selected.

When this switch is pushed in, RGB OUT is selected.

NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.

© 3M 2005. All Rights Reserved.

5

3M™ Digital Projector S55i/X55i

Part names

Control buttons

Cursor buttons ▲,▼,◄,► (24)

STANDBY/ON button (17)

LAMP indicator (46, 47)

TEMP indicator (46, 47)

POWER indicator (17)

INPUT button (18)

Remote control

SEARCH button (19)

RGB button (18)

STANDBY/ON

VIDEO RGB SEARCH

VIDEO button (19)

ASPECT button (19)

ASPECT

 

AUTO

BLANK

 

 

 

 

HOME button (23)

MAGNIFY

HOME

PAGE UP

VOLUME

 

ON

 

 

 

MAGNIFY

ON button (21)

OFF button (21)

END button (23)

FREEZE button (22)

POSITION button (20)

ESC button (24)

Battery cover (15) (on the back)

END

PAGE DOWN MUTE

OFF

 

FREEZE

KEYSTONE

POSITION

MENU

 

ENTER

ESC

RESET

STANDBY/ON button (17) AUTO button (20) BLANK button (22)

PAGE UP button (23) VOLUME button (18)

MUTE button (18) PAGE DOWN button (23) KEYSTONE button (21)

MENU button (24)

Cursor buttons ▲,▼,◄,► (24)

ENTER button (24) RESET button (24)

6

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Setting up

Setting up

WARNING ►Place the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using damaged projector could result in a fire and/or an electric shock.

Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

Do not place the projector in the side/front/rear-up position, except cleaning

the air filter.

►Place the projector in a cool place, and pay attention enough to ventilation. The high temperature of the projector could cause a fire, a burn and/or malfunction to the projector.

Do not stop up, block and cover the projector's vents.

Keep a space of 30 cm or more between the sides and other objects such as walls.

Do not place the projector on a metallic thing or anything weak in heat.

Do not place the projector on a carpet, cushion or bedding.

Do not place the projector in direct sunlight or near a hot object such as a heater.

Put nothing about lens and vents of the projector. Put nothing on the projector.

Put nothing that is sucked or sticks to the bottom of projector. This projector

has some intake vents also on the bottom.

►Do not place the projector on the place that gets wet. Damping the projector or inserting liquid in the projector could cause a fire, an electric shock and/or malfunction to the projector.

Do not place the projector in a bathroom or the outdoors.

Put nothing containing the liquid near the projector.

CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector in such place could cause a fire, an electric shock and/or malfunction to the projector.

• Do not place the projector near a humidifier, a smoking space or a kitchen. ►Adjust the direction of the projector to keep the light from directly hitting the projector's remote sensor.

Fastening the lens cover

To avoid losing the lens cover, please fasten it the lens cap to the projector using the strap.

 

Strap ring

 

 

 

Strap

 

Strap hole

1. Fix the strap to the strap ring of the lens cover.

Bottom side

 

2.

Put the strap into the groove on the rivet.

 

 

3.

Push the rivet into the strap hole.

 

7

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Setting up

Arrangement

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen: S55i : 800×600, X55i :

1024×768

 

 

 

 

(b)

(a) The screen size (diagonal)

 

 

 

 

 

 

 

 

(b) Distance from the projector to the screen (±10%)

 

 

 

 

(c) The height of the screen (±10%)

(c) up

 

 

 

 

4:3

16:9

 

 

 

 

 

 

 

 

 

(a)

(a)

(c) down

 

 

For the model S55i

(a) Screen

 

 

 

 

4 : 3 screen

 

 

 

 

 

 

16 : 9 screen

 

 

 

(b) Projection distance

 

(c) Screen height

 

(b) Projection distance

(c) Screen height

size

 

 

[m (inch)]

 

 

 

[cm (inch)]

 

 

 

[m (inch)]

 

 

[cm (inch)]

 

[inch (m)]

 

 

 

 

 

 

 

 

 

 

 

 

min.

max.

down

up

 

min.

max.

down

up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

(0.8)

 

0.9

(36)

1.1

(43)

5

(2)

41

(16)

 

1.0

(39)

1.2

(47)

-1

(0)

39

(15)

40

(1.0)

 

1.2

(48)

1.5

(57)

6

(2)

55

(22)

 

1.3

(52)

1.6

(63)

-2

(-1)

51

(20)

50

(1.3)

 

1.5

(60)

1.8

 

(72)

8

(3)

69

(27)

 

1.7

(65)

2.0

(79)

-2

(-1)

64

(25)

60

(1.5)

 

1.8

(72)

2.2

 

(87)

9

(4)

82

(32)

 

2.0

(79)

2.4

(94)

-2

(-1)

77

(30)

70

(1.8)

 

2.1

(84)

2.6

 

(101)

11

(4)

96

(38)

 

2.3

(92)

2.8

(110)

-3

(-1)

90

(35)

80

(2.0)

 

2.4

(96)

2.9

 

(116)

12

(5)

110

(43)

 

2.7

(105)

3.2

(126)

-3

(-1)

103

(41)

90

(2.3)

 

2.8

(109)

3.3

 

(130)

14

(5)

123

(49)

 

3.0

(118)

3.6

(142)

-4

(-1)

116

(46)

100

(2.5)

 

3.1

(121)

3.7

 

(145)

15

(6)

137

(54)

 

3.3

(132)

4.0

(158)

-4

(-2)

129

(51)

120

(3.0)

 

3.7

(145)

4.4

 

(174)

18

(7)

165

(65)

 

4.0

(158)

4.8

(190)

-5

(-2)

154

(61)

150

(3.8)

 

4.6

(182)

5.5

 

(218)

23

(9)

206

(81)

 

5.0

(198)

6.0

(238)

-6

(-2)

193

(76)

200

(5.1)

 

6.2

(242)

7.4

 

(291)

30

(12)

274

(108)

 

6.7

(264)

8.1

(317)

-8

(-3)

257

(101)

250

(6.4)

 

7.7

(303)

9.3

 

(364)

38

(15)

343

(135)

 

8.4

(330)

10.1 (397)

-10

(-4)

322

(127)

300

(7.6)

 

9.2

(364)

11.1

(437)

46

(18)

411

(162)

 

10.1 (397)

12.1 (476)

-12

(-5)

386

(152)

For the model X55i

(a) Screen

 

 

 

 

4 : 3 screen

 

 

 

 

 

 

16 : 9 screen

 

 

 

(b) Projection distance

 

(c) Screen height

 

(b) Projection distance

(c) Screen height

size

 

 

[m (inch)]

 

 

 

[cm (inch)]

 

 

 

[m (inch)]

 

 

[cm (inch)]

 

[inch (m)]

 

 

 

 

 

 

 

 

 

 

 

 

min.

max.

down

up

 

min.

max.

down

up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

(0.8)

0.9

(36)

1.1

(43)

5

(2)

41

(16)

 

1.0

(39)

1.2

(47)

-1

(0)

39

(15)

40

(1.0)

1.2

(48)

1.5

(58)

6

(2)

55

(22)

 

1.3

(52)

1.6

(63)

-2

(-1)

51

(20)

50

(1.3)

 

1.5

(60)

1.8

 

(73)

8

(3)

69

(27)

 

1.7

(66)

2.0

(79)

-2

(-1)

64

(25)

60

(1.5)

 

1.8

(73)

2.2

 

(87)

9

(4)

82

(32)

 

2.0

(79)

2.4

(95)

-2

(-1)

77

(30)

70

(1.8)

 

2.2

(85)

2.6

 

(102)

11

(4)

96

(38)

 

2.4

(93)

2.8

(111)

-3

(-1)

90

(35)

80

(2.0)

 

2.5

(97)

3.0

 

(117)

12

(5)

110

(43)

 

2.7

(106)

3.2

(127)

-3

(-1)

103

(41)

90

(2.3)

 

2.8

(109)

3.3

 

(132)

14

(5)

123

(49)

 

3.0

(119)

3.6

(143)

-4

(-1)

116

(46)

100

(2.5)

 

3.1

(122)

3.7

 

(146)

15

(6)

137

(54)

 

3.4

(133)

4.0

(159)

-4

(-2)

129

(51)

120

(3.0)

 

3.7

(146)

4.5

 

(176)

18

(7)

165

(65)

 

4.0

(159)

4.9

(192)

-5

(-2)

154

(61)

150

(3.8)

 

4.6

(183)

5.6

 

(220)

23

(9)

206

(81)

 

5.1

(200)

6.1

(240)

-6

(-2)

193

(76)

200

(5.1)

 

6.2

(244)

7.5

 

(294)

30

(12)

274

(108)

 

6.8

(266)

8.1

(320)

-8

(-3)

257

(101)

250

(6.4)

 

7.8

(306)

9.3

 

(367)

38

(15)

343

(135)

 

8.5

(333)

10.2 (400)

-10

(-4)

322

(127)

300 (7.6) 9.3 (367) 11.2 (441) 46 (18) 411 (162) 10.2 (400) 12.2 (480) -12 (-5) 386 (152)

8

© 3M 2005. All Rights Reserved.

 

3M™ Digital Projector S55i/X55i

Setting up

Adjusting the projector's elevator

CAUTION ►If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust the elevator feet.

►Do not incline the projector rightward or leftward. Also do not incline it backward or forward exceeding 9 degrees. Exceeding these range could cause malfunction, and could shorten the lifetime of the consumables.

►Except for inclining by the elevator feet adjustment, place the projector horizontally.

You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

Elevator feetElevator button

1. After making sure that the projector is cool adequately, press and hold in the elevator buttons while holding the projector.

The elevator buttons and the elevator feet are on the both sides.

2. Raise or lower the projector to the desired height and release the elevator buttons.

When you release the elevator buttons, the elevator feet will lock into position.

3. If necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.

© 3M 2005. All Rights Reserved.

9

3M™ Digital Projector S55i/X55i

Setting up

Using the Security Bar

WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury.

CAUTION ►The security bar is not a comprehensive theft prevention measure. It is intended to be used as an extra theft prevention measure.

A commercial anti-theft chain or wire can be attached to the security bar on the projector.

1. How to attach

An anti-theft chain or wire can be attached as shown in the illustration.

(Anti-theft chains or wires of up to 10mm in diameter can be used)

Security Bar

Anti-theft chain or wire [sold separately]

10

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Setting up

Connecting your devices

CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.

►Use the accessory cable or a designated-type cable for the connection. Some cables have to be used with core set. A too long cable may cause a certain picture degradation. Please consult with your dealer for details. For cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

Secure the screws on the connectors and tighten.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

For some RGB signal modes, the optional Mac adapter is necessary.

When the image resolution is changed on a computer, depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

About Plug-and-Play capability

Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC 2B. Plug-and-Play can be achieved by connecting this projector to a computer is VESA DDC (display data channel) compatible.

Please take advantage of this function by connecting the accessory RGB cable to the RGB IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

Please use the standard drivers in your computer as this projector is a Plug-and-Play monitor.

© 3M 2005. All Rights Reserved.

11

3M™ Digital Projector S55i/X55i

Setting up

Examples of connection with a computer

* In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports. To change the settings, refer to the AUDIO item in the SETUP menu. (34)

 

RGB cable

USB cable

 

 

 

 

 

 

 

 

 

 

Y

AUDIO IN2

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

CONTROL

RGB IN1

 

 

 

 

CB/PB

 

 

RGB IN2

USB

 

 

 

L

 

RGB OUT

 

RGB out

Audio out

RS-232C USB

CR/PR

 

 

 

K

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

S-VIDEO

 

 

 

Stereo mini

RS-232C cable

 

 

 

 

 

 

 

Use the RGB IN OUT

audio cable

 

 

 

 

 

 

 

 

switch to select

 

 

 

 

 

 

 

 

 

 

Stereo mini audio cable

RGB IN2 (RGB IN2 is

 

 

selected if the switch is

RGB out

 

Audio out

 

 

 

not pushed in).

 

 

Y

R

 

 

 

 

 

 

 

AUDIO IN

 

 

 

 

 

 

 

 

CONTROL

RGB IN1

USB

 

 

 

CB/PB

 

AUDIO OUT

 

 

 

 

L

 

 

 

 

 

 

AUDIO IN1

 

K

 

 

 

CR/PR

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

RGB cable

S-VIDEO

Connecting to a monitor (output)

RGB in

RGB cable

Use the RGB IN OUT switch to select RGB OUT (RGB OUT is selected if the switch is pushed in).

Y

AUDIO IN2

 

 

 

R

 

 

 

 

 

CONTROL

RGB IN1

RGB OUT

CB/PB

 

AUDIO OUT

 

USB

L

 

 

 

AUDIO IN1

 

K

CR/PR

 

 

 

 

 

 

VIDEO

 

 

 

 

S-VIDEO

 

 

 

Connecting to a speaker with amplifier (output)

Audio in

AUDIO IN2

Y R

 

 

 

CONTROL

RGB IN1

 

CB/PB

 

AUDIO OUT

RGB IN2

USB

L

RGB OUT

 

 

AUDIO IN1

 

K

CR/PR

 

 

 

 

 

 

VIDEO

S-VIDEO

Stereo mini audio cable

12

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Setting up

Examples of connection with a VCR/DVD player

* In the default setting, the AUDIO IN2 L/R port is the audio port for the VIDEO, S-VIDEO

and COMPONENT VIDEO ports. To change the settings, refer to the AUDIO item in the SETUP menu. (34)

 

Audio/Video cable

AUDIO IN2

 

Audio (R) out

Y

R

 

 

CONTROL

RGB IN1

 

 

 

CB/PB

AUDIO OUT

 

Audio (L) out

CR/PR

AUDIO IN1

 

 

 

 

 

 

 

VIDEO

 

 

 

S-VIDEO

 

Video out

 

Audio cable

AUDIO IN2

 

 

 

 

Y

 

 

 

 

R

 

 

 

Audio (R) out

 

 

 

 

CONTROL

RGB IN1

 

 

CB/PB

L

 

AUDIO OUT

 

 

 

 

 

AUDIO IN1

 

Audio (L) out

 

CR/PR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

S

 

 

 

 

S-Video out

S-Video cable

 

 

 

 

Component video out

Component video cable

 

Y

 

 

 

IN2

 

 

 

 

Y

R

 

 

CB/PB

 

 

 

 

 

 

 

 

CONTROL

RGB IN1

 

 

 

 

 

 

 

CB/PB

L

 

AUDIO OUT

 

CR/PR

 

 

 

AUDIO IN1

 

 

CR/PR

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

Audio (R) out

 

S-VIDEO

 

 

 

 

 

 

 

 

 

Audio (L) out

Audio cable

RGB IN2 RGB OUT

RGB IN2 RGB OUT

RGB IN2 RGB OUT

USB

K

USB

K

USB

K

© 3M 2005. All Rights Reserved.

13

3M™ Digital Projector S55i/X55i

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.

Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

Only plug the power cord into an outlet rated for use with the power cord's specified voltage range.

Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

AC inlet

Connector

of the power cord

1.

2.

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

14

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Remote control

Remote control

Putting batteries

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

Keep a battery away from children and pets.

Do not recharge, short circuit, solder or disassemble a battery.

Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres to your body or clothes, rinse well with water immediately.

1. Remove the battery cover.

Slide back and remove the battery cover in the direction of the arrow.

2. Insert the batteries.

Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.

3. Close the battery cover.

Replace the battery cover in the direction of the arrow and snap it back into place.

© 3M 2005. All Rights Reserved.

15

 

3M™ Digital Projector S55i/X55i

Remote control

Using the remote control

CAUTION ►Be careful in handling the remote control.

Do not drop or expose the remote control to physical impact.

Do not get the remote control wet or place it on wet objects. It may result in malfunction.

Remove the batteries from the remote control and store them in a safe place if you won’t be using the remote control for an extended period.

Replace the batteries whenever the remote control starts malfunctioning.

When strong lights (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the remote control may cause to function. Adjust the direction of the projector to keep the light from directly hitting the projector’s remote sensor.

The remote control works with the projector’s remote sensor.

approx. 3 meters 30º 30º

The range of the remote sensor is 3 meters with a 60 degree range (30 degrees to the left and right of the remote sensor).

Also a remote signal reflected in the screen etc. may be available. If it is difficult to send a remote signal to the sensor directly, please try to use the reflected signal.

Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.

16

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Power on/off

Power on/off

WARNING ►When the power is on, a strong light is emitted. Do not look into the lens of projector. Also do not peep at the inside of projector through a hole.

NOTE • Turn the power on/off in right order. Please power on the projector prior to the connected devices. Power off the projector later than the connected devices.

Turning on the power

1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.

STANDBY/ON

POWER

button

indicator

2. Remove the lens cover, and set the power switch to the ON position.

The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function for these several seconds.

Press the STANDBY/ON button on the projector or the remote control.

3. The projector lamp will light up and the POWER

POWER

indicator will begin blinking in green. When the power is

(Steady orange)

completely on, the indicator will stop blinking and light in

POWER

green.

(Blinking in green)

To display the picture, select an input signal according to

 

the section "Selecting an input signal" (18).

POWER

 

Turning off the power

(Steady green)

This product is able to turn off the main power during the cooling. However, please pay special attention to below two points when you do:

(1)Please do not turn the projector on again for at least 1 minute in this case. Neglect could shorten the lifetime of the lamp.

(2)During use or immediately after use, do not touch around the lamp and vents of the projector (4 ) It could cause a burn.

1. Press the STANDBY/ON button on the projector or the remote control. The message "Power off?" will appear on the screen for approximately 5 seconds.

2. Press the STANDBY/ON button on the projector or the remote control again while the message appears.

The projector lamp will go off, and the POWER indicator will begin blinking in orange.

Power off?

POWER

Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.

3. Make sure that the power indicator lights in steady orange, and set the power switch to the OFF position. The POWER

indicator will go off. Attach the lens cover.

(Blinking in orange) POWER (Steady orange)

© 3M 2005. All Rights Reserved.

17

1.
2.

3M™ Digital Projector S55i/X55i

Operating

Operating

Adjusting the volume

Press the VOLUME button on the remote control.

A dialog will appear on the screen to aid you in adjusting the volume. Use the cursor buttons ▲/▼ to adjust the volume.

To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

 

 

 

STANDBY/ON

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

 

Temporarily muting the sound

1. Press the MUTE button on the remote control.

Adialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE or VOLUME button. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

MUTE

OFF

 

 

 

FREEZE

 

 

KEYST E

Selecting an input signal

1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port as below.

RGB IN1 RGB IN2 VIDEO S-VIDEO COMPONENT VIDEO

● When the RGB IN2/RGB OUT port functions as an RGB out port (the RGB IN OUT switch is pushed in), RGB IN2 cannot be selected. In that case “RGB2/RGB OUT RGB OUT” message will be displayed.

1. Press the RGB button on the remote control to select an input port for the RGB signal.

Each time you press the button, the projector switches its RGB VIDEO RGB SEARCH STANDBY/ON input port as below.

ASPECT

AUTO BLANK

RGB IN1 RGB IN2

If the RGB button is pushed (when switching from VIDEO to RGB signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the RGB IN1 port first. If no input is detected at the port, the projector will check the RGB IN2 port.

When the RGB IN2/RGB OUT port functions as an RGB out port (the RGB IN OUT switch is pushed in), RGB IN2 cannot be selected. In that case “RGB2/ RGB OUT RGB OUT” message will be displayed.

18

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Selecting an input signal (continued)

1.

Press the VIDEO button on the remote control to select an

 

 

input for video signal.

Each time you press the button, the projector switches its

video input port as below.

COMPONENT VIDEO S-VIDEO VIDEO

Operating

STANDBY/ON VIDEO RGB SEARCH

AUTO BLANK

If the VIDEO button is pushed (when switching from RGB to VIDEO signals) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT VIDEO port first. If no input is

detected at the port, projector will begin to check other ports in above order.

Searching an input signal

Press the SEARCH button on the remote control.

VIDEO

RGB

SEARCH

1. The projector will start to check its input ports in order to

 

 

STANDBY/ON

ASPECT

 

BLANK

find any input signals.

Then when an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

RGB IN 1 RGB IN 2 COMPONENT VIDEO S-VIDEO VIDEO

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For an RGB signal

NORMAL 4:3 16:9

STANDBY/ON

VIDEO RGB SEARCH

For a video signal/no signal

4:3 16:9 SMALL

ASPECT

AUTO BLANK

HOME

PAGE UP

VOLUME

The NORMAL mode keeps the original aspect ratio of the signal.

For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT VIDEO input, only 16:9 mode can be selected.

Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

Focus ring

Zoom ring

1.

Use the zoom ring to adjust the screen size.

 

2.

Use the focus ring to focus the picture.

 

 

© 3M 2005. All Rights Reserved.

19

MAGNIFY HOME
AUTO BLANK
VOLUME
STANDBY/ON

3M™ Digital Projector S55i/X55i

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.

VIDEO RGB SEARCH

For an RGB signal

The vertical position, the horizontal position, the clock phase ASPECT and the horizontal size will be automatically adjusted.

And the aspect ratio will be automatically selected. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

For a video signal or s-video signal

The video format best suited for the respective input signal will be selected automatically.

This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu (32). For a component video signal, the signal type is identified automatically independently of this function.

For a video signal, s-video signal or component video signal

The vertical position and horizontal position will be automatically adjusted.

For a component video signal

The aspect ratio will be automatically selected. The clock phase will be automatically adjusted.

The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.

Adjusting the position

1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.

2. Useposition.the cursor buttons ▲/▼/◄/► to adjust the picture

OFF

 

FREEZE

KEYSTONE

POSITION

MENU

When you want to reset the operation, press the RESET button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.

20

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Correcting the keystone distortions

1. Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion.

2. Use the cursor buttons ▲/▼ to correct the distortion. To close the dialog and complete this operation, press the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

Operating

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

MUTE

OFF

 

 

 

FREEZE

 

 

KEYSTONE

The adjustable range for correction will vary among inputs. For some input, this function may not work well.

When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly.

When the zoom adjustment is set to the TELE (telephoto focus), this correction may be excessive. This function should be used when the zoom adjustment is set to the WIDE (wide-angle focus) whenever possible.

Using the magnify feature

1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode.

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

END

PAGE DOWN

MUTE

2. Use the cursor buttons ▲/▼ to adjust the zoom level.

To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the zoom area, press the POSITION button again.

To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control.

The projector automatically exits the MAGNIFY mode when the input signal is changed, or when the display condition is changed.

Although in the MAGNIFY mode, the keystone distortion condition may vary, it will be restored when the projector exits the MAGNIFY mode.

© 3M 2005. All Rights Reserved.

21

3M™ Digital Projector S55i/X55i

Operating

Freezing the screen

1. Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode.

To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

MUTE

OFF

 

 

 

FREEZE

 

 

KEYSTONE

The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed.

If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in the FREEZE mode for too long.

Temporarily blanking the screen

1. Press the BLANK button on the remote control.

The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in the SCREEN menu (35).

 

STANDBY/ON

VIDEO

RGB SEARCH

ASPECT

AUTO BLANK

MAGNIFY HOME PAGE UP

To exit the blank screen and return to the input signal screen, press the BLANK button again.

The projector automatically returns to the input signal screen when the input signal is changed, or when one of the projector’s buttons or the remote control buttons is pressed.

22

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Operating

Operating the computer screen

CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment.

While using this function, please connect only with a computer.

Before connecting, read the manuals of the computer you will connect.

NOTE • It may not be possible to control notebook PC, and other computers with built-in pointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing device. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

The USB control can be used only for the functions listed below. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

This function is not available while the lamp is warming up (the POWER indicator flashes green), and while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

USB mouse and keyboard control

1. Connect the projector’s USB port to the computer via the mouse cable.

 

 

 

STANDBY/ON

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

MUTE

OFF

 

 

 

FREEZE

 

 

KEYSTONE

POSITION

 

 

MENU

 

ENTER

 

ESC

 

 

RESET

Available function

Remote control operation

 

 

Move pointer

Use ▲, ▼, ◄, ► buttons

Left click with mouse

Press ENTER button

Right click with mouse

Press RESET button

Press keyboard’s HOME key

Press HOME button

Press keyboard’s END key

Press END button

Press keyboard’s PAGE UP key

Press PAGE UP button

Press keyboard’s PAGE DOWN key

Press PAGE DOWN button

Press keyboard’s ESC key

Press ESC button

© 3M 2005. All Rights Reserved.

23

3M™ Digital Projector S55i/X55i

Multifunctional settings

Multifunctional settings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, and EASY MENU. EASY MENU cosists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

MENU button

POSITION

ENTER button

ENTER

Cursor buttons

ESC

RESET button

1. Press the MENU button on the remote control or one of the cursor buttons on the projector.

The Advanced MENU or EASY MENU will appear.

In the EASY MENU

2. If you want to change it to the Advanced MENU, select the "Go to Advanced Menu"

3. Use the cursor buttons ▲/▼ to select an item to operate. 4. Use the cursor buttons◄/► to operate the item.

In the Advanced MENU

2. Use the cursor buttons ▲/▼ to select a menu.

If you want to change it to the EASY MENU, select the EASY MENU.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to select an item. The display of the selected menu will be active.

 

 

STANDBY/ON

 

SEARCH

 

 

AUTO

BLANK

MENU

 

 

 

PAGE UP

VOLUME

 

PAGE DOWN

MUTE

 

 

KEYSTONE

 

 

MENU

RESET

 

 

 

ENTER

 

 

 

RESET

 MENU [RGB]

 

   :SELECT

 PICTURE

 BRIGHTNESS      0

 IMAGE

 CONTRAST        0

 INPUT

 GAMMA        DEFAULT 1

 SETUP

 COLOR TEMP   MIDDLE

 SCREEN

 COLOR           +0

 OPTION

 TINT            +0

 EASY MENU

 SHARPNESS        3

 

 PROGRESSIVE  TURN OFF

 

 MY MEMORY    SAVE 1

 EASY MENU

 

 ASPECT             4:3

KEYSTONE

+0

MODE

 

NORMAL

BRIGHTNESS

+0

+0

CONTRAST

+0

COLOR

 

 

+0

TINT

 

 

 3

SHARPNESS

 

WHISPER

 

NORMAL

MIRROR

 

NORMAL

RESET

 

 

FILTER TIME

   0h

LANGUAGE

ENGLISH

 Go To Advance Menu...

3. Use the cursor buttons ▲/▼ to select an item to operate.

Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.

4. Use the cursor buttons▲/▼ to operate the item.

When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.

In the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.

5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will automatically disappear after about 10 seconds.

Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.

24

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Multifunctional settings

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

 EASY MENU

 

 ASPECT             4:3

KEYSTONE

+0

MODE

NORMAL

BRIGHTNESS

+0

+0

CONTRAST

+0

COLOR

+0

TINT

 3

SHARPNESS

 

WHISPER

NORMAL

MIRROR

NORMAL

RESET

 

FILTER TIME

   0h

LANGUAGE

ENGLISH

 Go To Advance Menu...

Item

Description

ASPECT

Using the buttons ◄/► switches the mode for aspect ratio.

See the ASPECT item in the IMAGE menu (30).

 

KEYSTONE

Using the buttons ◄/► corrects the keystone distortion.

See the item KEYSTONE of section SETUP menu. (21)

 

 

Using the buttons ◄/► switches the mode of picture type. The

 

modes of picture type are combinations of a mode of GAMMA and

 

a mode of COLOR TEMP. Choose a suitable mode according to the

 

projected source.

 

NORMAL CINEMA DYNAMIC

MODE

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

 

CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)

 

DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

 

• When the combination of GAMMA and COLOR TEMP differs from

 

pre-assigned modes above, the display on the menu for the MODE

 

is “CUSTOM”. Please refer to the GAMMA (27) and COLOR

 

TEMP (28) items in the PICTURE menu.

 

• When this function is performed, a certain extra such as a line may appear.

BRIGHTNESS

Using the buttons ◄/► adjusts the brightness.

See the item BRIGHTNESS in the PICTURE menu (27).

 

CONTRAST

Using the buttons ◄/► adjusts the contrast.

See the item CONTRAST of section PICTURE menu (27).

 

COLOR

Using the buttons ◄/► adjusts the strength of whole color.

See the COLOR item in the PICTURE menu (28).

 

TINT

Using the buttons ◄/► adjusts the tint.

See the TINT item in the PICTURE menu (28).

 

Using the buttons ◄/► adjusts the sharpness.

SHRPNESS

See the SHARPNESS item in the PICTURE menu (28).

• There may be some noise when an adjustment is made. This is

 

 

not a malfunction.

WHISPER

Using the buttons ◄/► turns off/on the whisper mode.

See the WHISPER item in the SETUP menu (34).

 

© 3M 2005. All Rights Reserved.

25

3M™ Digital Projector S55i/X55i

Multifunctional settings

EASY Menu (continued)

Item

Description

MIRROR

Using the buttons ◄/► switches the mode for mirror status.

See the MIRROR item in the SETUP menu (34).

 

 

Performing this item resets all of the items of EASY MENU except

RESET

FILTER TIME and LANGUAGE.

A dialog is displayed for confirmation. Selecting RESET using the

 

 

button ▲ performs resetting.

 

Performing this item resets the filter timer which counts usage time

 

of the air filter.

FILTER TIME

A dialog is displayed for confirmation. Selecting RESET using the

 

button ▲ performs resetting.

 

See the FILTER TIME item in the OPTION menu (38).

LANGUAGE

Select the LANGUAGE item to toggle the menu language. Refer to

description of LANGUAGE in the SCREEN menu (35).

 

Go To

Select “Go To Advanced Menu” to use the menu of PICTURE,

Advanced Menu

IMAGE, INPUT, SETUP, SCREEN or OPTION.

26

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Multifunctional settings

PICTURE Menu

With the PICTURE menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 BRIGHTNESS      0

 IMAGE

 CONTRAST        0

 INPUT

 GAMMA        DEFAULT 1

 SETUP

 COLOR TEMP   MIDDLE

 SCREEN

 COLOR           +0

 OPTION

 TINT            +0

 EASY MENU

 SHARPNESS        3

 

 PROGRESSIVE  TURN OFF

 

 MY MEMORY    SAVE 1

Item

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHTNESS

Using the buttons ▲/▼ adjusts the brightness. :

 

 

Light Dark

 

CONTRAST

Using the buttons ▲/▼ adjusts the contrast. :

Strong Weak

 

Using the buttons ▲/▼ switches the GAMMA mode.

 

 

 

 

 

 

#1 DEFAULT #1 CUSTOM #2 DEFAULT

 

 

 

 

 

 

#3 CUSTOM #3 DEFAULT #2 CUSTOM

 

 

 

 

 

 

To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM

 

 

 

 

 

 

Selecting a mode of CUSTOM and then

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing the button ► or the ENTER button

 

 

 

 

 

 

ENTER :

 

 

displays a dialog to aid you in adjusting the

 

 

1 2 3 4

5 6 7

8

 

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

This function is useful when you want to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

change the brightness of particular tones.

 

 

 

 

 

 

 

 

 

 

 

 

 

Choose an item using the buttons ◄/►, and

+0 +0 +0 +0

+0 +0 +0

+0

 

 

 

 

 

GAMMA [CUSTOM 1]

 

GAMMA

adjust the level using the buttons ▲/▼.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can display a test pattern for checking the effect of your

 

 

adjustment by pressing the ENTER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

Each time you press the ENTER button, the pattern changes as

 

 

below.

 

 

 

 

 

 

 

 

 

 

 

 

 

No pattern Gray scale of 9 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

Ramp Gray scale of 15 steps

 

 

 

 

 

 

 

 

 

 

 

 

 

The eight equalizing bars correspond to eight tone levels of the

 

test pattern except the darkest in the left end. If you want to adjust

 

the 2nd tone from left end on the test pattern, use the equalizing

 

adjustment bar “1”. The darkest tone at the left end of the test

 

pattern cannot be controlled with any of equalizing adjustment bar.

 

• When this function is performed, a certain extra such as a line

 

 

may appear.

 

 

 

 

 

 

 

 

 

 

 

 

© 3M 2005. All Rights Reserved.

27

3M™ Digital Projector S55i/X55i

Multifunctional settings

PICTURE Menu (continued)

Item

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ switches the mode of color temperature.

 

HIGH MIDDLE LOW CUSTOM

 

 

 

 

 

 

 

 

 

 

To adjust CUSTOM

 

 

 

 

 

 

 

 

 

 

Selecting the CUSTOM and then pressing the

 

 

 

 

 

 

 

 

 

 

button ► or the ENTER button displays a dialog

 

 

 

 

 

ENTER :

 

 

OFFSET

 

GAIN

 

to aid you in adjusting the OFFSET and/or GAIN

R G B

R G B

 

of the CUSTOM mode.

 

 

 

 

 

 

 

 

 

 

OFFSET adjustments change the color intensity

 

 

 

 

 

 

 

 

 

 

on the whole tones of the test pattern.

 

 

 

 

 

 

 

 

 

 

+0 +0 +0

+0 +0 +0

COLOR TEMP

GAIN adjustments mainly affect color intensity

 

 

 

 

COLOR TEMP

 

 

 

 

 

 

 

 

 

on the brighter tones of the test pattern.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Choose an item using the buttons ◄/►, and adjust the level using

 

the buttons ▲/▼.

 

 

 

 

 

 

 

 

 

 

You can display a test pattern for checking the effect of your

 

adjustment by pressing the ENTER button.

 

 

 

 

 

 

 

 

 

 

Each time you press the ENTER button, the pattern changes as

 

below.

 

 

 

 

 

 

 

 

 

 

No pattern Gray scale of 9 steps

 

 

 

 

 

 

 

 

 

 

Ramp Gray scale of 15 steps

 

 

 

 

 

 

 

 

 

 

• When this function is performed, a certain extra such as a line

 

may appear.

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the strength of whole color.

COLOR

Strong Weak

 

 

 

 

 

 

 

 

 

 

• This item can be selected only for a video signal.

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the tint.

 

 

 

 

 

 

 

 

 

TINT

Green Red

 

 

 

 

 

 

 

 

 

• This item can be selected only for a video signal except for

 

 

SECAM.

 

 

 

 

 

 

 

 

 

 

Using the buttons ▲/▼ adjusts the sharpness.

 

 

 

 

 

 

 

 

 

SHARPNESS

Strong Weak

 

 

 

 

 

 

 

 

 

• There may be some noise and/or the screen may flicker for a

 

 

moment when an adjustment is made. This is not a malfunction.

28

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Multifunctional settings

PICTURE Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ switches the progress mode.

 

TV FILM TURN OFF

 

• This function is performed only for an interlaced signal of a VIDEO

 

input, an S-VIDEO input or CONPONENT VODEO input of 525i

PROGRESSIVE

(480i) or 625i (576i) signal.

 

• When TV or FILM is selected, the screen image will be sharp.

 

FILM adapts to the 2-3 Pull-Down conversion system. But these

 

may cause a certain defect (for example, jagged line) of the picture

 

for a quick moving object. In such a case, please select TURN OFF,

 

even though the screen image may lose the sharpness.

 

Selecting a mode of MY MEMORY using the buttons ▲/▼ and then

 

pressing the button ► or the ENTER button performs each function.

 

LOAD1 LOAD2 LOAD3 LOAD4

 

SAVE4 SAVE3 SAVE2 SAVE1

 

This projector has 4 numbered memories for adjustment data.

 

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on

MY MEMORY

the memory whose number corresponds to the command’s number,

and adjusts the picture automatically depending on the data.

 

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 saves the current

 

adjustment data on the memory whose number corresponds to the

 

command’s number.

 

• The current adjustment data of the items in the PICTURE menu is

 

stored, except for the adjustment data in the CUSTOM modes for

 

the GAMMA and COLOR TEMP items.

 

• There may be some noise and/or the screen may flicker for a

 

moment when data is loaded to memory. This is not a malfunction.

© 3M 2005. All Rights Reserved.

29

3M™ Digital Projector S55i/X55i

Multifunctional settings

IMAGE Menu

With the IMAGE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 ASPECT         4:3

 IMAGE

 OVER SCAN      5

 INPUT

 V POSITION     25

 SETUP

 H POSITION     142

 SCREEN

 H PHASE        16

 OPTION

 H SIZE         1344

 EASY MENU

 AUTO ADJUST EXECUTE

Item

Description

 

 

 

 

 

Using the buttons ▲/▼ switches the mode for aspect ratio.

 

 

For an RGB signal

 

 

4:3 16:9 NORMAL

 

ASPECT

For a video signal / no signal

 

 

4:3 16:9 SMALL

 

 

• The NORMAL mode keeps the original aspect ratio of the signal.

 

 

• For an HDTV signal of 1125i (1080i) or 750p (720p) as the

 

 

COMPONENT VIDEO input, this item can't be selected.

 

 

Using the buttons ▲/▼ adjusts the over-scan ratio.

 

OVER SCAN

Large (It reduces picture) Small (It magnifies picture)

 

• This item can be selected only for a video signal.

 

 

• When this adjustment is too large, certain degradation may appear

 

 

at the frame area of the picture. In such a case, please adjust small.

 

 

Using the buttons ▲/▼ adjusts the vertical position.

 

 

Up Down

 

V POSITION

• Over-adjusting the vertical position may cause noise to appear

 

 

on the screen. If this occurs please reset the vertical position to the

 

 

default setting. Pressing the RESET button when V POSITION is

 

 

selected will reset the V POSITION to the default setting.

 

 

Using the buttons ▲/▼ adjusts the horizontal position.

 

 

Left Right

 

H POSITION

• Over-adjusting the horizontal position may cause noise to appear

 

 

on the screen. If this occurs please reset the horizontal position to

 

 

the default setting. Pressing the RESET button when H POSITION

 

 

is selected will reset the H POSITION to the default setting.

 

 

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate

 

 

flicker.

 

H PHASE

Right Left

 

• This item can be selected only for an RGB signal or a component

 

 

 

 

video signal. Note that this does not work with the input signal of

 

 

525i(480i)/625i(576i)/SCART RGB from the component video port.

 

30

© 3M 2005. All Rights Reserved.

 

3M™ Digital Projector S55i/X55i

 

Multifunctional settings

IMAGE Menu (continued)

 

 

Item

Description

 

 

 

Using the buttons ▲/▼ adjusts the horizontal size.

 

Large Small

H SIZE

• This item can be selected only for an RGB signal.

• When this adjustment is excessive, the picture may not be

 

 

displayed correctly. In such a case, please reset the adjustment

 

by pressing the RESET button on the remote control during this

 

operation.

 

Selecting this item performs the automatic adjustment feature.

 

For an RGB signal

 

The vertical position, the horizontal position, the clock phase and

 

the horizontal size will be automatically adjusted. And the aspect

 

ratio will be automatically selected.

 

Make sure that the application window is set to its maximum size

 

prior to attempting to use this feature. A dark picture may still be

 

incorrectly adjusted. Use a bright picture when adjusting.

 

For a video signal or s-video signal

 

The video format best suited for the respective input signal will be

AUTO ADJUST

selected automatically.

This function is available only when the AUTO mode is selected to

EXECUTE

the VIDEO FORMAT item in the INPUT menu. For a component

 

video signal, the signal type is identified automatically independently

 

of this function.

 

For a video signal, s-video signal or component video signal

 

The vertical position and horizontal position will be automatically

 

adjusted.

 

For a component video signal

 

The aspect ratio will be automatically selected.

 

The clock phase will be automatically adjusted.

 

• The automatic adjustment operation requires approximately 10

 

seconds. Also please note that it may not function correctly with

 

some input.

© 3M 2005. All Rights Reserved.

31

 

3M™ Digital Projector S55i/X55i

Multifunctional settings

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

 

   :SELECT

 PICTURE

 COLOR SPACE  AUTO

 IMAGE

 COMPONENT    COMPONENT

 INPUT

 VIDEO FORMAT AUTO

 SETUP

 FRAME LOCK

TURN ON

 SCREEN

 INFORMATION

 

 OPTION

 

 

 EASY MENU

 

 

Item

Description

 

 

 

 

 

Using the buttons ▲/▼ switches the mode for color space.

 

 

AUTO RGB SMPTE240 REC709 REC601

 

COLOR SPACE

• This item can be selected only for an RGB signal or a component

 

video signal (except signals of 525i(480i)/625i(576i)/SCART RGB

 

 

from the component video port).

 

 

• The AUTO mode automatically selects the optimum mode.

 

 

• The AUTO operation may not work well at some signals. In such a

 

 

case, it might be good to select a suitable mode except AUTO.

 

 

Using the buttons ▲/▼ switches the function of COMPONENT

 

 

VIDEO port.

 

COMPONENT

COMPONENT SCART RGB

 

When the SCART RGB is selected, the COMPONENT VIDEO port

 

 

function as a port for a SCART RGB signal input. A SCART adapter

 

 

and SCART cable realize a SCART RGB input to the projector. For

 

 

details, contact your dealer.

 

 

Using the buttons ▲/▼ switches the mode for video format.

 

 

AUTO NTSC PAL SECAM

 

 

N-PAL M-PAL NTSC4.43

 

 

• This item is performed only for a video signal from the VIDEO port

 

VIDEO FORMAT

or the S-VIDEO port. For a component video signal, the signal type

 

 

is identified automatically independently of this function.

 

 

• The AUTO mode automatically selects the optimum mode.

 

 

• The AUTO operation may not work well for some signals. If the

 

 

picture becomes unstable (ex. an irregular picture, a color lack),

 

 

please select the mode depending on the input signal.

 

 

Using the buttons ▲/▼ turns the frame lock function on/off.

 

 

TURN ON TURN OFF

 

 

• This item performs only at a RGB signal with vertical frequency of

 

FRAME LOCK

50 to 72 Hz for the model S55i, or 50 to 60 Hz for the model X55i.

 

• When the TURN ON is selected, a moving picture is displayed

 

 

 

 

more smoothly.

 

 

• This function may cause a certain degradation of the picture. In

 

 

such a case, please select the TURN OFF.

 

32

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

 

 

Multifunctional settings

INPUT Menu (continued)

 

 

 

Item

 

Description

Selecting this item displays a dialog titled “INPUT INFORMATION”.

It shows the information about the current input.

INPUT-INFORMATION

INPUT-INFORMATION

INPUT-INFORMATION

RGB

S-VIDEO

COMPONENT

1024x768 @60.0

SECAM

576i @50

FRAME LOCK

AUTO

SCART RGB

INFORMATION • The “FRAME LOCK” message on the dialog means the frame lock function is working.

• The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the

COMPONENT item in this menu. (32)

• This item can't be selected for no signal and sync out.

© 3M 2005. All Rights Reserved.

33

3M™ Digital Projector S55i/X55i

Multifunctional settings

SETUP Menu

With the SETUP menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 KEYSTONE     +0

 IMAGE

 WHISPER      NORMAL

 INPUT

 MIRROR       NORMAL

 SETUP

 VOLUME       16

 SCREEN

 AUDIO

 OPTION

 

 EASY MENU

 

Item

Description

Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data Lower in the data

• The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.

KEYSTONE

• When the V:INVERT or the H&V:INVERT is selected under the

 

item MIRROR, if the projector screen is inclined or if the projector is

 

angled downward, this function may not work correctly.

• When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible.

Using the buttons ▲/▼ turns off/on the whisper mode.

WHISPER

NORMAL WHISPER

• When the WHISPER is selected, acoustic noise and screen

 

 

brightness are reduced.

Using the buttons ▲/▼ switches the mode for mirror status.

MIRROR

NORMAL H:INVERT V:INVERT H&V:INVERT

VOLUME

Using the buttons ▲/▼ adjusts the volume.

High Low

 

 

Choose an input port using the buttons ▲/▼

 AUDIO

 

 

(1), then select the audio port to be interlocked

   QUIT

1   2

 

with the input port using the buttons ◄/► (2).

 RGB1  

AUDIO

When off is selected, both of two audio ports

 RGB2

 

do not work for the input port.

 S VIDEO

 

 

 

 COMPONENT

 

 

 

 VIDEO

 

(1)RGB1 RGB2 COMPONENT S-VIDEO VIDEO

(2)1 2

34

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Multifunctional settings

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 LANGUAGE      ENGLISH

 IMAGE

 MENU POSITION

 INPUT

 OSD BRIGHT.   5

 SETUP

 BLANK         BLACK

 SCREEN

 START UP      ORIGINAL

 OPTION

 MyScreen

 EASY MENU

 MyScreen Lock TURN OFF

 

 MESSAGE       TURN ON

Item

 

Description

 

 

 

Using the buttons ▲/▼ switches the OSD (On Screen Display)

 

language.

 

 

 

ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO

LANGUAGE

NORSK NEDERLANDS PORTUGUÊS

 

SVENSKA

 

 

SUOMI POLSKI TÜRKÇE

Using the buttons ◄/►/▲/▼ adjusts the menu position.

MENU POSITION To quit the operation, press the MENU button on the remote control or keep no operation for 10 seconds.

Using the buttons ▲/▼ switches the brightness level of the OSD (On OSD BRIGHT. Screen Display).

BRIGHT DARK

Using the buttons ▲/▼ switches the mode for the blank screen. The blank screen is a screen for the temporarily blanking feature

(22). It is displayed by pressing the BLANK button on the remote control.

 

MyScreen ORIGINAL BLUE WHITE BLACK

BLANK

MyScreen is a screen you can register as a desired screen. The

 

ORIGINAL screen is the existing standard screen. BLUE, WHITE

 

and BLACK are non-patterned (plain) screens in each color.

To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes.

For the MyScreen, please refer to the MyScreen item (36).

© 3M 2005. All Rights Reserved.

35

3M™ Digital Projector S55i/X55i

Multifunctional settings

SCREEN Menu (continued)

Item

Description

 

 

 

 

 

Using the buttons ▲/▼ switches the mode for the start-up screen.

 

 

The start-up screen is a screen displayed when no signal or an

 

 

unsuitable signal is detected.

 

 

MyScreen ORIGINAL TURN OFF

 

 

MyScreen is a screen you can register as a desired screen.The

 

START UP

ORIGINAL screen is the existing standard screen. When TURN

 

OFF is selected, the BLACK screen is used.

 

 

 

 

• To avoid remaining as an afterimage, the MyScreen and the

 

 

ORIGINAL screens will change to the BLANK screen after several

 

 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

 

 

will change to the BLACK screen.

 

 

• For the MyScreen, please refer to the item MyScreen below. For

 

 

the BLANK screen, please refer to the BLANK item (35).

 

 

This item functions for capturing the MyScreen of the blank screen

 

 

and the start-up screen. Please execute displaying the input

 

 

including the picture you want to capture.

 

 

1. Selecting this item displays a dialog titled “MyScreen”. It will ask

 

 

you if you start capturing the picture from the current screen.

 

 

Please wait for the target picture to be displayed, and press

 

 

the ENTER button on the remote control when the picture is

 

 

displayed. The picture will freeze and the frame for capturing

 

 

appears.

 

 

To stop performing, press the RESET or ESC button on the

 

 

remote control.

 

MyScreen

2. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please

 

move the frame to the position of the picture which you want to

 

 

 

 

use.

 

 

The frame may not be able to be moved for some input signals.

 

 

To start registration, press the ENTER button on the remote

 

 

control.

 

 

To restore the screen and return to the previous dialog, press the

 

 

RESET or ESC button on the remote control.

 

 

Registration takes several minutes. When the registration is

 

 

completed, the registered screen and the message “MyScreen

 

 

registration is finished.” are displayed for several seconds. If the

 

 

registration failed, the message “A capturing error has occurred.

 

 

Please try again.” is displayed.

 

 

Using the buttons ▲/▼ turns on/off the MyScreen lock function.

 

MyScreen Lock

TURN ON TURN OFF

 

When the TURN ON is selected, the item MyScreen is locked. Use

 

 

this function for protecting the current MyScreen.

 

36

© 3M 2005. All Rights Reserved.

 

3M™ Digital Projector S55i/X55i

Multifunctional settings

SCREEN Menu (continued)

Item

Description

 

 

 

Using the buttons ▲/▼ turns on/off the message function.

 

TURN ON TURN OFF

 

When the TURN ON is selected, the following message function

 

works.

 

“AUTO IN PROGRESS” while automatically adjusting

 

”NO INPUT IS DETECTED”

MESSAGE

”SYNC IS OUT OF RANGE”

"Searching….” while searching for the input

 

”Detecting….” while an input signal is detected

 

The indication of the input signal displayed by changing

 

The indication of the aspect ration displayed by changing

 

The indication of "FREEZE" and "II" while freezing the screen by

 

pressing the FREEZE button.

 

• When the TURN OFF is selected, please remember if the picture

 

is freezing. Do not mistake freezing for a malfurction (22).

© 3M 2005. All Rights Reserved.

37

3M™ Digital Projector S55i/X55i

Multifunctional settings

OPTION Menu

With the OPTION menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 AUTO SEARCH  TURN OFF

 IMAGE

 AUTO OFF      0min

 INPUT

 LAMP TIME     0h

 SETUP

 FILTER TIME   0h

 SCREEN

 SERVICE

 OPTION

 

 EASY MENU

 

Item

Description

 

 

 

Using the buttons ▲/▼ turns on/off the automatic signal search function.

 

TURN ON TURN OFF

This function works with INPUT, RGB, and VIDEO buttons. When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is

AUTO SEARCH started from the current port. Then when an input is found, the projector will stop searching and display the image.

RGB IN1 RGB IN2 COMPONENT VIDEO S-VIDEO VIDEO

 

• When the RGB IN2/RGB OUT port functions as an RGB out port (the

 

RGB IN OUT switch is pushed in), RGB IN2 cannot be selected. In

 

that case “RGB2/RGB OUT RGB OUTmessage will be displayed.

 

 

Using the buttons ▲/▼ adjusts the time to count down to

 

automatically turn the projector off.

 

 

 

 

Long (max. 99 minutes) Short (min. 0 minute = DISABLE)

 

AUTO OFF

AUTO OFF

 

ENABLE

DISABLE

AUTO OFF

1

0

 

 

 

 

 

 

 

When the time is set to 0, the projector is not turned off automatically.

 

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will go off and the power indicator begins blinking. Please

 

refer to the section “Turning off the power” (17).

 

 

The lamp time is the time counted after the last resetting. It is

 

shown in the OPTION menu as the usage time of the lamp.

 

Pressing the RESET button on the remote control or the button ►

 

of the projector displays a dialog. To reset the lamp time, select the

LAMP TIME

RESET using the button ▲.

 

 

 

 

RESET CANCEL

 

 

 

 

• Please reset the lamp time only when you have replaced the lamp,

 

for a suitable indication about the lamp.

 

 

 

 

• For the lamp replacement, see the section "Lamp" (40, 41).

 

The filter time is the time counted after the last resetting. It is shown

 

 

in the OPTION menu as the usage time of the air filter.

 

 

Pressing the RESET button on the remote control or the button ► of the projector

 

FILTER TIME

displays a dialog. To reset the filter time, select the RESET using the button ▲.

 

RESET CANCEL

 

 

 

 

 

 

 

 

• Please reset the filter time only when you have cleaned or replaced

 

 

the air filter, for a suitable indication about the air filter.

 

 

• For the air filter cleaning, see the section "Air filter" (42).

 

38

 

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Multifunctional settings

OPTION Menu (continued)

Item

Description

 

 

 

Selecting this item displays the SERVICE menu.

 

Select an item using the buttons ▲/▼, and press the button ► or

 

the ENTER button on the remote control to execute the item.

 

FANSPEEDAUTOADJUSTGHOSTKEYLOCKFILTERMESSAGFACTORYRESET

 

FAN SPEED

 

Using the buttons ▲/▼ switches the rotation speed of the cooling

 

fans. The HIGH is the mode for use at highlands etc. Note that the

 

projector is noisier when the HIGH is selected.

 

HIGH NORMAL

 

AUTO ADJUST

 

Using the buttons ▲/▼ enables/disables the automatic adjustment.

 

When DISABLE is selected, the automatic adjustment feature is

 

disabled, although rough adjustment is automatically performed

 

depending on the basic setting.

 

ENABLE DISABLE

 

• Depending on conditions, such as input image, signal cable to the

 

projector, environment around the projector, etc., the automatic adjustment

 

may not work correctly. In such a case, please choose DISABLE to

 

disable the automatic adjustment, and make adjustment manually.

GHOST

1.Select a color element of ghost using the buttons ◄/►.

2.Adjust the selected element using the buttons ▲/▼ to disappear ghost.

KEY LOCK

SERVICE Using the buttons ▲/▼ turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked.

TURN ON TURN OFF

• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.

FILTER MESSAGE

Use the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter.

50h 100h 200h 300h TURN OFF

After selecting “50h”, “100h”, “200h”, or “300h”, the message “CLEAN THE AIR FILTER” will appear after the timer reaches the interval time set by the menu. (38) When the “TURN OFF” is chosen, the air filter cleaning message will not appear.

Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.

It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the “200h”, “300h or “TURN OFF” is chosen.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.

RESET CANCEL

© 3M 2005. All Rights Reserved.

39

3M™ Digital Projector S55i/X55i

Maintenance

Maintenance

Lamp

WARNING

HIGH VOLTAGE

 

HIGH TEMPERATURE

HIGH PRESSURE

 

►The projector uses a high-pressure mercury glass lamp. The lamp can break

with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not

put it in a trash. Dispose of it in accordance with environmental laws. For lamp recycling, go to www.lamprecycle.org. (in the US)

For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does), unplug

the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the inside of the projector, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

Disconnect • If the lamp should break (it will make a loud bang when it does),

the plug

ventilate the room well, and make sure not to breathe the gas that

from the

comes out of the projector vents, or get it in your eyes or mouth.

power

• Before replacing the lamp, turn the projector off and unplug the power

outlet

cord, then wait at least 45 minutes for the lamp to cool sufficiently.

 

Handling the lamp while hot can cause burns, as well as damaging the

 

lamp.

Never unscrew except the appointed (marked by an arrow) screws.

Do not open the lamp door while the projector is suspended from the ceiling. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

Do not use the projector with the lamp door removed. To replace the lamp, make sure that the screws are tightened firmly. Loose screws could result in damage or injury.

Use only the lamp of the specified type.

If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

Using the lamp for long periods of time, could cause it dark, not to light up or to burst. When the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.

40

© 3M 2005. All Rights Reserved.

6.
7.
1.
2.

3M™ Digital Projector S55i/X55i

Maintenance

Lamp (continued)

A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.

To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = 78-6969-9861-2.

Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

Prepare a new lamp.

If the projector is mounted on the ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. Lamp door

In the case of replacement by yourself,

3. Loosen the lamp door screw (marked by arrow) and then slide the lamp door to the side to remove it.

4. Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles.

5. Insert the new lamp, and retighten firmly the two screws that are loosened in the previous process to lock it in place.

Slide the lamp door back in place and firmly fasten the lamp door a screw.

Turn the projector on and reset the lamp time using the LAMP TIME function in the OPTION menu (38).

(1)Press the MENU button to display a menu. Only when the EASY MENU has appeared, please perform the next step (2).

(2)Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the ► button.

(3)Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button.

(4)Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog will appear.

(5)Press the ▲ button to select “RESET” on the dialog. It performs resetting the lamp time.

Screw

Screws

Handle

NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

© 3M 2005. All Rights Reserved.

41

3M™ Digital Projector S55i/X55i

Maintenance

Air filter

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector with the air filter and the filter cover removed. It could result in a fire and/or malfunction to the projector.

►The air filter should be cleaned periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector.

NOTE • Please replace the air filter when it is damaged or too soiled, and also when you replace the lamp.

Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter. (38)

The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising.

If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible.

Please check and clean the air filter periodically, even if there is no message. Please replace the air filter when it is damaged or too soiled. Preparation of a new air filter is recommended.

To prepare a new air filter, contact your dealer and tell the air filter type number.

Type number = 78-8118-9641-0

And also when you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

2. When the projector is suspended from the ceiling, apply the vacuum cleaner to and around the filter cover first, to prevent penetration of dust or the like.

3. While supporting the projector with one hand, use your other hand to pull the filter cover forward in the direction of the arrow. Remove the air filter.

Handle Filter cover

42

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Air filtre (continued)

4. Apply a vacuum cleaner to the air filter and the filter cover. Please replace the air filter when it is damaged or too soiled.

5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six locations. Make sure there is no dust or dirt remaining after the cover is in place. If any dust or dirt remains use a vacuum cleaner to remove it as when placing the filter cover on the air filter.

Reattach the filter cover to the projector by aligning the filter cover with the grooves on the projector. While holding the handle, push down on the filter cover until it locks firmly in place.

6. Turn the projector on and reset the filter time using the FILTER TIME function in the OPTION menu (38).

Maintenance

Air filter’s knob

Air filter

mark

 

Filter cover

(1)Press the MENU button to display a menu. When the EASY MENU has appeared, please skip the next step (2).

(2)Point at the “OPTION” in the left column of the menu using ▼/▲ button, then press the ► button.

(3)Point at the “FILTER TIME” using ▼/▲ button, then press the ► button. A dialog will appear.

(4)Press the ▲ button to select “RESET” on the dialog. It performs resetting the filter time.

© 3M 2005. All Rights Reserved.

43

44
© 3M 2005. All Rights Reserved.
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
►Do not use cleaner or chemicals other than those listed below. ►Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling.

3M™ Digital Projector S55i/X55i

Maintenance

Other care

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.

Do not put a container containing water, cleaner or chemicals near the projector.

Do not use aerosols or sprays.

3M™ Digital Projector S55i/X55i

Troubleshooting

Troubleshooting

Related messages

When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the following appears, please contact your dealer or service company.

Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

Message

Description

 

 

NO INPUT IS DETECTED

There is no input signal.

Please confirm the signal input connection, and the status

ON ***

of the signal source.

 

 

The horizontal or vertical wavelength of the input signal

SYNC IS OUT OF RANGE

is out of the response parameter range of this unit.

ON *** fH *****kHz fV *****Hz

Please confirm the specs for your projector or the signal

 

source specs.

 

The internal temperature is rising.

 

Please turn the power off, and allow the projector to cool

 

down at least 20 minutes. After having confirmed the

 

following items, please turn the power ON again.

CHECK THE AIR FLOW

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

If the same indication is displayed after the remedy, please set

 

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

REMINDER

A note of precaution when cleaning the air filter.

*** HRS PASSED AFTER THE

Please immediately turn the power off, and clean or change

LAST FILTER CHECK.

the air filter referring to the “Air Filter” section of this manual.

FILTER MAINTENANCE IS ESSENTIAL

After you have cleaned or changed the air filter, please be

TO REMOVE WARNING MESSAGE,

sure to reset the filter timer (38).

RESET FILTER TIMER.

 

SEE MANUAL FURTHER INFO.

 

© 3M 2005. All Rights Reserved.

45

3M™ Digital Projector S55i/X55i

Troubleshooting

Regarding the indicator lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company.

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

Lighting

Turned

Turned

The projector is in a standby state.

In Orange

off

off

Please refer to the section “Power On/Off”.

Blinking

Turned

Turned

The projector is warming up.

In Green

off

off

Please wait.

Lighting

Turned

Turned

The projector is in an on state.

In Green

off

off

Ordinary operations may be performed.

Blinking

Turned

Turned

The projector is cooling down.

In Orange

off

off

Please wait.

 

 

 

The projector is cooling down. A certain error

Blinking

(discre-

(discre-

has been detected.

In Red

tionary)

tionary)

Please wait until the POWER indicator finishes

blinking, and then perform the proper measure using

 

 

 

the item descriptions below.

 

 

 

The lamp does not light, and there is a

 

 

 

possibility that interior portion has become

 

 

 

heated.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

 

 

Lighting

Turned

sufficiently cooled down, please make confirmation of

or

In Red

off

the following items, and then turn the power on again.

Lighting

 

 

• Is there blockage of the air passage aperture?

In Red

 

 

 

 

• Is the air filter dirty?

 

 

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please change the lamp referring to the section “Lamp”.

 

 

 

The lamp door has not been properly fixed.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 45 minutes. After the projector has

In Red

 

Turned

Blinking

sufficiently cooled down, please make confirmation of

or

In Red

off

the attachment state of the lamp door. After performing

Lighting

 

 

any needed maintenance, turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

46

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Troubleshooting

Regarding the indicator lamps (continued)

POWER

LAMP

TEMP

Description

indicator

indicator

indicator

 

 

 

 

 

 

 

 

The cooling fan is not operating.

Blinking

 

 

Please turn the power off, and allow the projector to

 

 

cool down at least 20 minutes. After the projector has

In Red

Turned

 

Blinking

sufficiently cooled down, please make confirmation

or

off

In Red

that no foreign matter has become caught in the fan,

Lighting

 

 

etc., and then turn the power on again.

In Red

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

 

 

 

please contact your dealer or service company.

 

 

 

There is a possibility that the interior portion

 

 

 

has become heated.

 

 

 

Please turn the power off, and allow the projector to

Blinking

 

 

cool down at least 20 minutes. After the projector has

 

 

sufficiently cooled down, please make confirmation of

In Red

 

 

Turned

Lighting

the following items, and then turn the power on again.

or

off

In Red

• Is there blockage of the air passage aperture?

Lighting

 

 

• Is the air filter dirty?

In Red

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

If the same indication is displayed after the remedy,

 

 

 

please set FAN SPEED of the SERVICE item in the

 

 

 

OPTION menu to HIGH.

 

 

 

It is time to clean the air filter.

Lighting

Simultaneous

Please immediately turn the power off, and clean or

change the air filter referring to the section “Air Filter”.

In Green

blinking in Red

After cleaning or changing the air filter, please be sure

 

 

 

to reset the filter timer. After the remedy, reset the

 

 

 

power to ON.

NOTE • When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the “” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp door, and then turn the power on again.

© 3M 2005. All Rights Reserved.

47

3M™ Digital Projector S55i/X55i

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company.

1. Before requesting repair, please check in accordance with the following chart. This operation sometimes resolves your problem.

If the situation cannot be corrected,

2. The projector’s microprocessor may need to be reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart.

3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (39) to reset all settings to factory default.

Then, if the problem is not removed after the remedy, please contact your dealer or service company.

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The electrical power cord is not plugged in.

14

 

Correctly connect the power cord.

 

 

 

The power switch is not set to the on position.

17

 

Set the power switch to [ | ] (On).

 

 

 

The main power source has been interrupted during

 

Power does not

operation such as by a power outage (blackout), etc.

17

come on.

Please turn the power off, and allow the projector to cool

 

down at least 2 minutes, then turn the power on again.

 

 

Either there is no lamp and/or lamp door, or either of

 

 

these has not been properly fixed.

40, 41

 

Please turn the power off, and allow the projector to cool down

 

at least 45 minutes. After the projector has sufficiently cooled

 

 

down, please make confirmation of the attachment state of the

 

 

lamp and lamp door, and then turn the power on again.

 

 

The signal cables are not correctly connected.

12, 13

 

Correctly connect the connection cables.

 

 

 

Signal source does not correctly work.

Neither sounds

Correctly set up the signal source device by referring to the

manual of the source device.

 

nor pictures are

 

 

The input changeover settings are mismatched.

18

outputted.

Select the input signal, and correct the settings.

 

 

 

The RGB IN2 port is assigned to an RGB out while

12

 

an RGB input signal is inputted to the port.

 

Push the RGB IN OUT switch to switch the function of the port.

 

48

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The signal cables are not correctly connected.

12,13

 

Correctly connect the audio cables.

 

 

 

The MUTE function is working.

18

 

Restore the sound pressing the MUTE or VOLUME button

Sound does not

on the remote control.

 

come out.

The volume is adjusted to an extremely low level.

18

 

Adjust the volume to a higher level using the menu function

 

or the remote control.

 

 

The AUDIO setting is not correct.

34

 

Correctly set the AUDIO item in the SETUP menu.

 

 

 

The lens cap is attached.

17

 

Remove the lens cover.

 

 

 

The signal cables are not correctly connected.

12, 13

 

Correctly connect the connection cables.

 

 

No pictures are

The brightness is adjusted to an extremely low level.

 

displayed.

Adjust BRIGHTNESS to a higher level using the menu

25

 

function or the remote control.

 

 

The computer cannot detect the projector as a plug

 

 

and play monitor.

11

 

Make sure that the computer can detect a plug and play

 

 

 

monitor using another plug and play monitor.

 

Video screen

The FREEZE function is working.

22

display freezes.

Press the FREEZE button to restore the screen to normal.

 

Colors have a

Color settings are not correctly adjusted.

25, 28,

Perform picture adjustments by changing the COLOR

fadedout

TEMP, COLOR, TINT and/or COLOR SPACE settings,

32

appearance, or

using the menu functions.

 

Color tone is

COLOR SPACE setting is not suitable.

32

poor.

Change the COLOR SPACE setting to AUTO, RGB,

 

SMPTE240, REC709 or REC601.

 

© 3M 2005. All Rights Reserved.

49

3M™ Digital Projector S55i/X55i

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

25

dark.

Select NORMAL for the WHISPER item in the SETUP

 

menu.

 

 

The lamp is approaching the end of its product

40, 41

 

lifetime.

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

44

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

50

© 3M 2005. All Rights Reserved.

3M™ Digital Projector S55i/X55i

Specifications

Specifications

NOTE • These specifications are subject to change without notice.

 

Item

 

 

Specification

 

 

Product name

Liquid crystal projector

 

 

 

 

 

Panel size

1.5 cm (0.6 type)

 

 

 

 

Liquid

 

 

 

 

 

 

 

Crystal

Drive system

TFT active matrix

 

 

 

 

panel

Pixels

S55i : 480,000 pixels (800 horizontal x 600 vertical)

 

 

 

X55i : 786,432 pixels (1024 horizontal x 768 vertical)

 

Lens

 

Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm

 

 

Lamp

 

180W UHB

 

 

 

 

 

Speaker

 

1W x 1

 

 

 

 

 

Power Supply

AC100-120V/3.1A, AC220-240V/1.7A

 

 

Power Consumption

290W

 

 

 

 

 

Temperature range

5 ~ 35°C (Operating)

 

 

 

 

 

 

306 (W) x 83 (H) x 249 (D) mm

 

 

 

Size

 

(Not including protruding parts)

 

 

 

 

 

• Please refer to the following figure.

 

 

Weight (mass)

2.8 kg

 

 

 

 

 

 

 

RGB input:

 

 

Video input:

 

 

 

 

RGB IN1..D-sub 15pin mini x1

COMPONENT VIDEO

 

 

RGB IN2 /OUT

 

 

(Y, CB/PB, CR/PR)......

RCA x3

 

 

D-sub 15pin mini ................

x1

S-Video ................................

 

1

 

 

(select RGB IN2 or RGB OUT)

Video ....................................

 

1

Ports

 

 

 

 

 

 

 

 

 

Audio input:

 

 

Communication port:

 

 

AUDIO 1..........

Stereo mini x1

CONTROL............

D-sub 9pin x1

 

 

AUDIO 2.....................

 

RCA x2

USB.......................

 

USB(B) x1

 

 

Audio output:

 

 

 

 

 

 

 

AUDIO OUT ...

Stereo mini x1

 

 

 

© 3M 2005. All Rights Reserved.

51

3M™ Digital Projector S55i/X55i

Specifications

Specifications (continued)

246mm

 

306mm

 

83mm

97mm

102mm

52

© 3M 2005. All Rights Reserved.

 

Intended Use

Before operating this machine, please read this entire manual thoroughly. The 3MTM Multimedia Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.

The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equipment and/or create a potentially unsafe operating condition.

3M Multimedia projectors and Wall Display Systems are designed to operate in a normal office environment.

16° to 29°C (60° to 85° F)

1080 %RH (without condensation)

0- 1828 m (0-6000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can affect the operation or performance of the projector.

Use of this product in adverse conditions will void the product warranty.

Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we’re the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.

3M Austin Center

3M Canada

3M Mexico, S.A. de C.V.

3M Europe

 

Building A145-5N-01

P.O. Box 5757

Apartado Postal 14-139

Boulevard de l’Oise

 

6801 River Place Blvd.

London, Ontario

Mexico, D.F. 07000

95006 Cerge Pontoise Cedex

 

Austin, TX 78726-9000

N6A 4T1

Mexico

France

Litho in China

 

 

 

 

 

 

 

 

© 3M 2005

 

 

 

 

78-6970-9437-9 Rev. A