All statements, technical information, and recommendations related to 3M's
products are based on information believed to be reliable, but the accurac y or
completeness is not guaranteed. Before using this product, you must evaluat e it
and determine if it is suitable f or your intended application. You ass ume all risks
and liability associated with such use. Any statements related to the product which
are not contained in 3M’s current public ations, or any contrary statements
contained on your purchase order shall ha ve no force or effect unless expressly
set forth in a written agreement signed b y an authorized officer of 3M.
Technical Support
For technical support, call 1-866-631-1656 or email meetings@mmm.com
1
User’s Manual
Intended Use Statement
The 3M Projector Sleeve for iPhone 4/4S is designed to operate with the Ap ple®
iPhone 4 and iPhone 4S and charge usin g Apple USB power adapter or computer
USB port in environments that meet thes e conditions:
z 5° to 35°C (41° to 95°F)
z 20–80% RH (without condensation)
z 0– 3048 m (0–10,000 feet) above sea le vel
Continued exposure to smoke, grease, oil a nd other airborne contaminants can
affect the operation or performance of the projector. Use of this product in advers e
conditions will void the product warranty.
Safety Information
Please read, understand, and follow all safety information contained in these
instructions prior to the use of this projector. Retain these instructions for future
reference.
Indicates a potentially hazardous situati on, which, if not
avoided, could result in death or serious injury and/or
property damage.
Indicates a potentially hazardous situati on, which, if not
avoided, may result in minor or m oderate injury and/or
property damage.
2
EN
User’s Manual
Warning
EN
To reduce the risk associated with hazardous voltage, fire, explosion, battery
leakage or overheating which may cause serious injury or death:
zDo not leave the product in a car or in dir ect sunlight for extended periods of
time. (-20 C to 70 C)
z Do not disassemble/ modify the product or attempt to remove the battery.
z Do not attempt to service this product. Con tact manufacturer.
z Do not use the product in water or a damp env ironment.
z Do not use a damaged USB cable or Apple USB power adapter.
z Charge with only computer USB port or Apple USB power adapter.
To reduce the risks associated with driv er distraction:
z Do not shine light into the driver's eyes.
z Driver should not operate product while dr iving.
To reduce the risks associated with choking:
z Keep the USB cable away from young childre n.
Caution
To reduce the risk associated with env ironmental disposal hazards which
may cause minor or moderate injury:
zDispose of the product and accessories in ac cordance with the federal, state,
local or regional laws which cover the disposal of electrical and electronic
waste.
To reduce the risks associated with projector LED bright light which may
cause minor or moderate injury:
z Do not look directly into the projector lens or shine it into anyone’s eyes
To reduce the risks associated with tripping and falling:
z Position the USB cable so that it is not a tripping hazard.
To reduce the risk of muscle strain which if not avoided may cause minor or
moderate injury:
zDo not position the projector in awkward viewing positions.
SAVE THESE INSTRUCTIONS
Limited Warranty
This warranty applies to the continental US only. The warranty terms, conditions,
remedy and limitation may vary in other countries. Contact your local 3M Company
for warranty information.
FCC STATEMENT - CLASS B
This equipment has been tested and foun d to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harm ful interference in a residential
installation. This equipment generates, uses and can radiate radio frequenc y
energy and, if not installed and used in accordance with the instructions, m ay
cause harmful interference to radio com munications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or m ore of the following measures:
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
zConsult the dealer or an experienced radio/T V technician for help.
NOTICE: This Class B digital apparatus c omplies with Canadian ICES-003.
INSTRUCTIONS TO USERS: This equipm ent complies with the requirements of
FCC equipment provided that the followin g conditions are met. If the cables include
a EMI ferrite core, attach the ferrite core end of the cable to the projector. Use the
cables which are included with the projector or specified.
Note: Changes or modifications not express ly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CE Statement
ElectroMagnectic Compatibility St atement: Meets 2004/108/EC
Directive
Low Voltage Directive: Meets 2006-95-EC Directive.
NOTICE: You can find the above appropriate cer tified regulatory marks in the
product projection by pressing power button for 10 seconds.
WEEE Statement
The following information is only for EU-members States: The mark
shown to the right is in compliance with W aste Electrical and
Electronic Equipment Directive 20 02/96/EC (WEEE). The mark
indicates the requirement NOT to dispos e the equipment as
unsorted municipal waste, but use the return and collection
systems according to local law.
Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (known as "RoHS” ),
2011/65/EU of the European Parliament a nd of the Council
and the Regulation 1907/2006 (known as “R EACH”) relating
to “Substances of Very High Concern (“SVHC's”), the European Union’s Directive
94/62/EC relating to packaging, the U.S. Lacey Act and other similar laws
(“Substance Laws”). Product will not contain substances in excess of permitted
concentration values established by Substance Laws unless the applicable
specifications specifically perm it that substance in a higher concentration value.
Without limiting the forgoing, substances in the product will not exceed the
following maximum concentration valu es in any homogeneous material
(“Restricted Values”): (a) 0.1% (by weight) f or each of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b)
0.01% (by weight) for cadmium.
Copyright, Trademarks and Properties Notices
3M and the 3M logo are trademarks of 3M Com pany. Used under license in
Canada. All other trade names refer enced are the service marks, trademarks or
registered trademarks of their respective companies.
Charge the projector by
connecting the projector to a
computer or an iPhone Power
Adapter using the USB cable
included with the projector.
NOTE:
i. The battery will take up to 4 hours to
charge.
ii. The Apple iPhone 4/4S Power
Adapter is not included with the
projector.
Charging for iPhone
1. Connect the iPhone to the
projector.
2. Press the iPhone charging
mode button to start or stop
charging for iPhone.
LED Indicator Modes
1.
1
1
2
2.
or
LED Status Indication
3 white LEDs stay on Power capacity is between 80% to 100%
2 white LEDs stay on Power capacity is between 45% to 80%
1 white LED stays on Power capacity is between 10% to 45%
1 white LED blinks Power capacity is below 10%
LED Marquee Product is being charged
LED blinks Charging for iPhone
Press the Power Button for 3
seconds to turn ON or turn OFF
the projector.
Adjusting the Focus
Adjust the focus by using the
focus wheel to get a sharper and
clear picture.
Projecting photos and videos via iPhone native app
1. Select the “Photos” icon on iPhone home screen.
2. Choose the photo or video you want to project.
* Photos can only be projected as a slideshow.
**Please push the volume control button on iPhone to adjust the
On the iPhone, switch the
Widescreen setting to "Off" in
Settings>Gerneral>TV out.
On the iPhone, switch the Auto-lock
to "Never" in Settings>General.
When the projector's power button
is held down for too long, the
projector enters engineering mode.
Press the power button until the
projector turns off, then press the
power button again for 3 seconds.