3M CSM1501 User Manual

Models:

CS1001/CS1501/CS2001/ CSM1001/CSM1501/CSM2001

Spec #

Quantity

Applications:

• Hard Water

• Moderate Soluable Metals

Water Softeners

At a Glance:

• Luxury water at an affordable price

• Proprietary brass water softening valve with motorized piston helps provide reliable and durable performance

• Compliant to California AB1953

• Semi-transparent ﬁ berglass media tank allows for media level check without disas-

Product Beneﬁ ts:

sembly.

• Extremely easy to set proprietary brass water softening valve

• Full 3/4” porting with 1” bypass for superior water ﬂ ow characteristics

• Cycle programmability to meet your exact water quality conditions

• Uses as little as 30 gallons of water during regeneration

CS/CSM Series

Product Dimensions:

Model No.

CS1001/CSM1001

CS1501/CSM1501

CS2001/CSM2001

• Semi-transparent ﬁ berglass threaded media tank allows for media level check without disassembly.

• Superior performance brine tank with salt shelf that provides virtually trouble-free operation

• CSM Series denotes metered initiated models that help to save salt and water by regenerating only when needed, based on total gallon ﬂ ow versus time.

Media Tank Brine Tank Minimum Space Requirements

D x H W x D x H

8” x 44”

(21 cm x 112 cm)

10” x 44”

(26 cm x 112 cm)

10” x 54”

(26 cm x 137.2 cm)

(38 cm x 38 cm x 87 cm)

15” x 15” x 34”

15” x 1 5” x 34”

15” x 15” x 34”

Width Height Depth

ABC

33”

(84 cm)

35”

(89 cm)

35”

(89 cm)

53”

(135 cm)

53”

(135 cm)

63”

(160 cm)

15”

(38 cm)

15”

(38 cm)

15”

(38 cm)

Spec #

Quantity

Model Number

Part Number

Speciﬁ cations:

Typical Installation:

WELL INSTALLATION

TREATED WATER

TREATED

SOFT WATER

PRESSURE

BRINE TANK

WATER

WASTE DRAIN

BACKWASH

PUBLIC WATER SUPPLY INSTALLATION

TREATED WATER

TREATED

SOFT WATER

BRINE

TANK

WATER

CAUTION: These diagrams shown are for reference purposes only. Read installation and operation manual prior to installing the unit.

WASTE DRAIN

BACKWASH

TANK

PRESSURE

WATER FOR

LAWN SPRINKLERS

OR OTHER

HIGH DEMAND

WASTE DRAIN

METER

RAW WELL WATER

RAW WATER

Model

Category

Media

cu ft (cu m)

Salt Dosage* lbs. (kg)

Softening

Capacity**

(grains)

Flow Rates: Service Backwash

* Salt Dosage: Top row indicates salt efﬁ cient setting, second row indicates factory setting and

third row indicates maximum setting with the supplied brine tank.

** Softening Capacity: Top row indicates salt efﬁ cient setting, second row indicates factory salt

setting and third row indicates maximum salt setting with the supplied brine tank.

NOTE: Certiﬁ ed NSF/ANSI Standard 372 compliant to California AB1953.

Maximum Operating Temperature: 110°F (43.3°C), Electrical Requirements: 110/120V, 60Hz Operating Pressure: 20 - 125 psi (138 - 862 kPa) Pipe Size: 1” NPT

CS1001/CSM1001 CS1501/CSM1501 CS2001/CSM2001

1.0 (0.03) 1.5 (0.04) 2.0 (0.06)

4.0 (1.8)

6.0 (2.7)

15.0 (6.8)

16,300 18,600 30,000

7.5

1.5

6.0 (2.7)

9.0 (4.1)

24.0 (10.9)

24,150 27,900 45,000

9.0

2.4

8.0 (3.6)

12.0 (5.4)

24.0 (10.9)

34,100 37,200 54,000

9.0

2.4

WARNING To reduce the risk associated with the ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

CAUTION

To reduce the risk associated with property damage due to water leakage:

• Read and follow Use Instructions before installation and use of this system.

3M Puriﬁ cation Inc. recommends regularly scheduled maintenance in order for the product to perform as advertised.

Limited Warranty:

3M Puriﬁ cation Inc. warrants this Product to be free from defects in material and workmanship during normal use for the warranty period set forth below. The warranty period commences from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Puriﬁ cation Inc. or failure to follow installaation and use instructions. No warranty is given as to the service life of any ﬁ lter cartridge, membrane, or media as it will vary with local water conditions and water consumption. 3M PURIFICATION INC.MAKES NO OTHER

WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product is found defective within the warranty

period, your exclusive remedy and 3M Puriﬁ cation Inc.’s sole obligation shall be, at 3M Puriﬁ cation Inc.’s option, to replace or repair the Product or refund the purchase price of the Product. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Puriﬁ cation Inc.’s exclusive obligation.

Warranty Period:

• One (1) year on the entire product unit

• Five (5) years on the

• Five (5) years on the control valve

• Five (5) years on salt storage container and components*

Limitation of Liability: 3M Puriﬁ cation Inc. will not be liable for any loss or damage arising from this 3M Puriﬁ cation Inc. product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

*water softeners only

3M Puriﬁ cation Inc.

400 Research Parkway Meriden, CT 06450 U.S.A. Toll Free: 1.800.222.7880 Worldwide: 203.237.5541 Fax: 203.238.8701 www.aquapure.com • www.3Mpuriﬁ cation.com

media tank only (does not include internal component parts)

Distributed by:

Aqua-Pure is a trademark of 3M Company used under license.

All other trademarks are the property of their respective owners.

3M is a trademark of 3M Company.

70-0202-7532-0 REV 0312