3M CS-732 User Manual
Cold Cup Applications
Series 700 Sanitary Quick Change Systems with Built-in Valve Head
The 3M™ Water Filtration Products are carefully designed to protect beverage equipment, provide consistent beverage
quality, and ensure seamless beverage service.
The sanitary quick change design allows for quick and easy cartridge change-outs and minimizes contamination of the
filtration media.
Its compact footprint allows the unit to be installed snugly behind the beverage unit or neatly under a cabinet.
The 700 Series housing is durable and shatter-resistant, minimizing the potential for leaks.
The built-in shut off valve allows cartridge change-outs without shutting off the water supply.
Proper fit of the cartridge is assured with a 1/4 turn.
3/8” vertical connections are compatible with common equipment and tubing installations.
Units are FDA, CFR-21 compliant for use in all food and beverage applications and are 3rd party certified for design
and performance.
Three (3) premium carbon technologies are available for design and performance.
Maximum Protection
CS-722 Capacity: 2,000 gallons (7,571 liters) or 266 cups/day*
CS-732 Capacity: 3,000 gallons (11,356 liters) or 400 cups/day*
Features Product Benefits
• Graded density, compressed carbon block • Does not require activation
• Extends contact time for maximum chlorine and sediment reduction
• 0.5 micron cyst, turbidity, fine sediment reduction • Extended protection and long life
• Chlorine taste and odor reduction • Enhances beverages quality over the life of the filter
General Purpose
CS-712 Capacity: 2,500 gallons (9,464 liters) or 333 cups/day*
CS-772 Capacity: 3,500 gallons (13,249 liters) or 466 cups/day*
Features Product Benefits
• Graded density, multi-composite carbon block • Does not require activation
• 1.0 micron sediment reduction • Enhances beverage clarity
• Chlorine taste and odor reduction • Enhances beverage quality over the life of the filter
Problem Water
CS-762 Capacity: 2,400 gallons (9,085 liters) or 320 cups/day*
Features Product Benefits
• Built-in 5 micron pre filtration • Suitable for water conditions with heavy dirt load
• Reduces maintenance caused by clogged valves and orifices
• Chlorine taste and odor reduction • Enhances beverage quality over the life of the filter
*Cups/day based on 8oz cup (237 ml), 20 day work month and 6 month change-out schedule.
Quotation for Specified 3M™ Water Filtration Products
a 3M company
Specified Model #
Part #
Price Quoted
Installed on what equipment
Quantity Required
Applications/Specifications
Model# Part#
CS-722 55889-14 12 9/16 x 3 5/8
CS-732 55889-16 15 3/4 x 3 5/8
CS-712 5588912 12 9/16 x 3 5/8
CS-772 55889-04 15 3/4 x 3 5/8
CS-762 55889-02 12 9/16 x 3 5/8
System
Dimensions
in (cm)
(31.9 x 9.2)
(40 x 9.2)
(31.9 x 9.2)
(40 x 9.2))
(31.9 x 9.2)
Replacement
Cartridge
CS-22 55895-07 X X X X 2,000
CS-32 55817-23 X X X X 3,000
CS-12 55895-03 X X 2,500
CS-72 55817-15 X X 3,500
CS-62 55584-04 X X 2,400
These installation tips are for informational purposes only and are not intended
to be used as actual installation instructions.
CAUTION: To reduce the risk associated with property damage due to water leakage:
To reduce the risk associated with property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes..
• Protect from freezing, remove filter cartridge when temperatures are expected to
drop below 40° F (4.4° C).
• Do not install on hot water supply lines. The maximum operating water temper
ture of this filter system is 100°F (38°C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure
exceeds 80 psi, you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer
conditions exist you must install a water hammer arrester. Contact a plumbing
professional if you are uncertain how to check for this condition.
• The disposable filter cartridge must be replaced every 6 months, at the rated
capacity or if a noticeable reduction in flow rate occurs.
• Systems certified for Cyst reduction may be used on disinfected water that may
contain filterable cysts. EPA Establishment No. 070595-CT-001
Part#
Chlorine
Taste and
Odor
Scale
Inhibition
Sediment
Reduction
Heavy
Sediment
WARNING: To reduce the risk associated with the ingestion of contaminants:
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system. Systems certified for
cyst reduction may be used on disinfected water that may contain filtratable cysts.
EPA Establishment #070595-CT-001
12 9/16 in
(31.9 cm)
Cyst
Reduction
15 3/4 in
(40 cm)
3 5/8in
(9.2 cm)
Turbidity
Reduction
Capacity
Gals.
(Liters)
(7,570)
(11,356)
(9,464)
(13,249)
(9,085)
3M™ Water Filtration Products contain one or more of the following NSF listed head/cartridge combinations:
CS-722/CS-22
CS-732/CS-32
CS-712/CS-12
CS-772/CS-72
CS-762/CS-62
Refer to the PDS sheet for the certified claims.
Flow
Rate
gpm (lpm)
1.0
(3.78)
1.0
(3.78)
1.0
(3.78)
1.0
(3.78)
1.0
(3.78)
3 5/8in
(9.2 cm)
Carton
Dimensions
cu. ft. (cu. m.)
26
(11.8)
20
(9.1)
26
(11.8)
20
(9.1))
26
(11.8)
Carton
Qty
1.8
(0.05)
1.53
(0.04)
1.8
(0.05)
1.53
(0.04)
1.8
(0.05)
Case
12
12
12
12
12
Limited Warranty
CUNO Incorporated warrants this Product to be free from defects in material and workmanship for 5 years from the date of purchase. This warranty does not cover failures resulting from abuse, misuse,
alteration or damage not caused by CUNO or failure to follow installation and use instructions. If the Product is defective CUNO will replace the Product or refund your Product purchase price. CUNO will
not be liable for any indirect, special, incidental, or consequential damages arising from the use of this Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. To obtain warranty service, mail your request to Warranty Claims, CUNO Incorporated, 400 Research Parkway, Meriden, CT 06450. Proof of purchase
(original sales receipt) must accompany the warranty claim, along with a complete description of the Product, model number and alleged defect. This warranty gives you specific legal rights and
you may have other rights which vary from state to state, or country to country.
Distributed By:
Meriden, CT 06450, USA
© 2007 3M Company. All rights reserved.
3M and CUNO are trademarks of 3M Company used under license.
NSF is a trademark of NSF International.
LITOCS005 1007
Toll Free: 1.888.218.CUNO
Worldwide: 203.237.5541
www.cunofoodser vice.com
CUNO Incorporated
400 Research Parkway
Fax: 203.238.8701
Loading...