3M CFSM1254 User Manual
3M™ Water Filtration Products
mo
SPEC#
QUANTITY
application:
POINT-OF-USE WATER SOFTENING
model:
CFSM1254
The 3M™ Water Filtration Products CFSM1254 Water Softener
System is designed to reduce maintenance and increase energy
effi ciency in water using foodservice equipment by reducing hardness in water. High capacity cation ion exchange resin reduces
hardness that can coat heating elements and form scale in the
water storage area. This softened water can reduce equipment
cleaning times and maximize effi ciency of cleaning agents. Reduction of scale-causing hardness also maximizes energy effi ciency of
the equipment.
PRODUCT BENEFITS
• Distributor scrubs resin clean during regeneration.
PRODUCT SPECIFICATIONS
Model
Number
CFSM1254 CFSM1254E 2.5 (70.8)
Part
Number
Resin Volume
Cu. Ft. (Lit.)
Service
Flow Rate
9 gpm
(34.1 lpm)
Peak
Flow Rate
11 gpm
(41.6 lpm)
• Safety brine valve prevents messy overfl ow of salt brine.
• Salt support shelf allows the use of most types of water softener
salt and helps prevent salt bridging and mushing that can cause
inadequate regeneration.
• Operates on 110-12 volt / 60 hz (transformer included).
Maximum Capacity
56,800 Grains 1” 5/8” tube or 3/4” NPT
Inlet/Outlet Pipe
Size
Drain Line
SPEC#
QUANTITY
MODEL NUMBER
PART NUMBER
3M™ Water Filtration ProductsCFSM1254 WATER SOFTENER
SPECIFICATIONS
System:
• Holds 135 lbs. (61 kg) of salt.
• Maximum operating pressure of 125 psi (862 kPa) and operating temperature of
110°F (43.3°C).
Control Valve:
• Composite thermoplastic construction.
• Connects to tank with 2 1/2” x 8 threaded connections.
Resin Tank:
• Blow molded polyethylene inner shell.
A
B
• Wound fi berglass outer layer.
• Semi-transparent
• Turbulator Distributor
Brine Tank:
• High density polyethylene.
• Includes safety brine valve.
• Includes air check assembly.
CFSM1254
A
(Height)
B
(Width)
C
(Depth)
NOTE: The width (B) includes 10 in. (25.4 cm) between the brine tank and
the media tank to allow for servicing.
WARNING: To reduce the risk associated with the ingestion of
contaminants:
• Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system. Systems certifi ed for cyst reduction may be used on disinfected
water that may contain fi lterable cysts. EPA Establishment #070595-CT-001
3M Purifi cation Inc. recommends regularly scheduled maintenance in
order for the product to perform as advertised/sold. 3M Purifi cation Inc.
shall not be liable for system failures due to improper maintenance.
63 in.
(160 cm)
37 in.
(94 cm)
15 in.
(38.1 cm)
IMPORTANT: INSTALLATION TIPS
These installation tips are for informational purposes only and are not intended to be used
as actual installation instructions. CAUTION: To reduce the risk associated with property
damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Protect from freezing, depressurize and drain system when temperatures are expected
to drop below 33°F (0.6°C).
• Do not install on hot water supply lines. The maximum operating water temperature of
this fi lter system is 110°F (43.3°C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure ex-
ceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions exist
you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.
LIMITED WARRANTY
3M Purifi cation Inc. warrants this Product will be free from defects in material and manufacture for fi ve (5) years from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage
not caused by 3M Purifi cation Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any media as it will vary with local water conditions and water consumption. 3M PURIFICA-
TION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period, 3M Purifi cation
Inc. will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Purifi cation Inc.’s exclusive obligation. For
additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual.
Limitation of Liability. 3M Purifi cation Inc. will not be liable for any loss or damage arising from this 3M Purifi cation Inc. product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
3M Purifi cation Inc.
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.866.990.9785
Worldwide: 203.237.5541
Fax: 203.238.8701
www.3Mfoodservice.com
www.3Mpurifi cation.com
3M is a trademark of 3M Company.
© 2012 3M Company. All rights reserved.
70-0201-9384-6
REV 0212
Loading...