3M™ Water Filtration Products
SPEC#
QUANTITY
application:
ESPRESSO EQUIPMENT
model:
CFS6090-C & CFS6135-C
The 3M™ Water Filtration Products CFS6090-C & CFS6135-C Water
Treatment Systems are designed to reduce hard scale build-up on
espresso machine boilers and maintain efficient brewing machine
operations. High capacity sodium ion exchange resin reduces hard
scale that causes equipment break down and increased energy consumption. Premium activated carbon reduces chlorine taste and
odor and bitterness associated with poor water quality. The optional
system with flush valve eliminates the need for additional fittings.
PRODUCT BENEFITS
• Valve-in-head design simultaneously shuts off and vents water
with 1/4 turn, allowing for simple and virtually trouble-free cartridge change-outs.
CFS6090-C
PRODUCT SPECIFICATIONS
Model
Number
CFS6090-C 55993-02
CFS6135-C
w/Flush Valve
Part
Number
55993-09 1,100 Grains SWS1350-C 1
Reduction Claims Capacity
Chlorine Taste & Odor
Hardness
700 Grains
• 3/8” NPT vertical ports.
• CFS6090-C removes hardness up to 700 grains and the CFS6135-C
removes hardness up to 1,100 grains. High capacity carbon ensures a variety of impurities are reduced.
• Sanitary Quick Change (SQC) encapsulated cartridges reduce contamination during change-outs.
• NSF and/or FDA CFR-21 compliant materials.
System
Flow Rate
0.5 gpm
(1.9 lpm)
Application Replacement Cartridge Qty Sizing
SWC900-C 1
Up to 20 Grains
Hardness
To determine sizing:
Divide the grain capacity of the system by the incoming water hardness to determine gallons (liters) of water treated.
Example:
* System Capacity
Incoming Hardness
= Gallons Treated System capacity @ 1,100 grains
Incoming hardness @ 15 grains/gallon
Gallons (liters) treated = 73 gal. (276 lit.)
See Formula*CFS6135-C 55993-04 1,100 Grains SWC1350-C 1
SPEC#
3 5/8"
(9.2 cm)
CFS6090-C
15 3/4"
(40 cm)
CFS6135-C
20 1/16"
(51 cm)
2" (5.1 cm)
Cartridge
Clearance
QUANT ITY
MODEL NU MB ER
PART NUMBER
3M™ Water Filtration ProductsCFS6090-C & CFS6135-C
PHYSICA L SP EC IF ICATIONS
• System is a single vessel design.
• 3/8” NPT vertical ports.
• System reduces carbonate hardness through the use of ion exchange resin.
• Resin has no color throw in the effluent water.
• System incorporates chlorine taste and odor reduction.
• System maximum operating pressure of 125 psi (862 kPa) and operating temperatures of 100°F (37.8°C).
• Each system has a service flow rate of 0.5 gpm (1.9 lpm).
• System materials are FDA CFR-21 and/or NSF compliant.
• Cartridges are sanitary in design, requiring no contact with the filter media during
cartridge change-out.
IMPORTANT: INSTALLATION TIPS
These installation tips are for informational purposes only and are not intended to be
used as actual installation instructions. CAUTION: To reduce the risk associated with
property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
WARNING: To reduce the risk associated with the ingestion of
contaminants:
• Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
CUNO Incorporated recommends regularly scheduled maintenance and
replacement of the filter cartridge(s) in order for the product to perform
as advertised/sold. CUNO shall not be liable for system failures due to
improper maintenance.
LIMITED WARRANTY
CUNO Incorporated warrants this Product to be free from defects in material and workmanship for five (5) years from the date of purchase. This warranty does not cover
failures resulting from abuse, misuse, alteration or damage not caused by CUNO or failure to follow installation and use instructions. If the Product is defective CUNO will
replace the Product or refund your Product purchase price. CUNO will not be liable for any indirect, special, incidental, or con-sequential damages arising from the use of
this Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. To obtain warranty
service, mail your request to Warranty Claims, CUNO Incorporated, 400 Research Parkway, Meriden, CT 06450. Proof of purchase (original sales receipt) must accompany
the warranty claim, along with a complete description of the Product, model number and alleged defect. This warranty gives you specific legal rights and you may have
other rights which vary from state to state, or country to country.
• Protect from freezing, remove filter cartridge when temperatures are expected to drop
below 40°F (4.4°C).
• Do not install on hot water supply lines. The maximum operating water temperature
of this filter system is 100°F (37.8°C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions
exist you must install a water hammer arrester. Contact a plumbing professional if you are
uncertain how to check for this condition.
• The disposable filter cartridge MUST be replaced every 12 months, at the rated capacity
or if a noticeable reduction in flow rate occurs.
3M is trademark of 3M Company.
© 2008 3M Company. All rights reserved.
LITFS232 0808
70-0201-9370-5
CUNO Incorporated
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.800.222.7880
Worldwide: 203.237.5541
Fax: 203.238.8701
www.cuno.com