3M CFS100WS User Manual

3M™ Water Filtration Products

SPEC#

QUANTITY

application:

POINT-OF-USE WATER SOFTENING

model:

CFS100WS

The 3M™ Water Filtration Products CFS100WS Water Softener System is designed to reduce maintenance and increase energy efﬁ ciency in water-using foodservice equipment by reducing hardness in water. High capacity cation ion exchange resin reduces hardness that can coat heating elements and form scale in the water storage area. This softened water can reduce equipment cleaning times and maximize efﬁ ciency of cleaning agents.

PRODUCT BENEFITS

• Control valve is designed for reliable service.

PRODUCT SPECIFICATIONS

Model

Number

CFS100WS 56000-02 1 (28.3)

Part

Number

Resin Volume

Cu. Ft. (Lit.)

System

Flow Rate

7 gpm

(26.5 lpm)

Peak

Flow Rate

9 gpm

(34.1 lpm)

• Safety brine valve prevents messy overﬂ ow of salt brine.

• Salt support shelf allows the use of most types of water softener salt and reduces salt bridging and mushing that can interfere with regeneration.

• Operates on 120V/60Hz. 220V/50Hz is available upon request.

Maximum Capacity

30,000 Grains 1” NPT 5/8” OD x 1/2” ID

Inlet/Outlet

Pipe Size

Drain Line

SPEC#

QUANTITY

MODEL NUMBER

PART NUMBER

3M™ Water Filtration ProductsCFS100WS WATER SOFTENER

SPECIFICATIONS

System:

• Holds 160 lbs. (72.6 kg) of salt.

• Maximum operating pressure of 125 psi (862 kPa) and operating temperature of 110°F (43.3°C).

Control Valve:

• Composite thermoplastic construction.

• Connects to resin tank with 2 1/2” x 8 threads.

• Time clock regeneration.

• Integrated bypass.

Resin Tank:

• Wound ﬁ berglass outer layer.

• Semi-transparent

• Turbulator Distributor

Brine Tank:

• High density polyethylene.

• Includes safety brine valve.

• Includes air check assembly.

CFS100WS

(Height)

(Width)

(Depth)

NOTE: The width (B) includes 10 in. (25.4 cm) between the brine tank and the media tank to allow for servicing.

51 in.

(130 cm)

33 in.

(83.8 cm)

15 in.

(38.1 cm)

IMPORTANT: INSTALLATION TIPS

These installation tips are for informational purposes only and are not intended to be used as actual installation instructions. CAUTION: To reduce the risk associated with property damage due to water leakage:

• Read and follow Use Instructions before installation and use of this system.

• Installation and use MUST comply with all state and local plumbing codes.

WARNING: To reduce the risk associated with the ingestion of contaminants:

• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

3M Puriﬁ cation Inc. recommends regularly scheduled maintenance in order for the product to perform as advertised/sold. 3M Puriﬁ cation Inc. shall not be liable for system failures due to improper maintenance.

• Protect from freezing, depressurize and drain system when temperatures are expected to drop below 33°F (0.6°C).

• Do not install on hot water supply lines. The maximum operating water temperature of this ﬁ lter system is 110°F (43.3°C).

• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.

• Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.

LIMITED WARRANTY

3M Puriﬁ cation Inc. warrants this Product will be free from defects in material and manufacture for ﬁ ve (5) years from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Puriﬁ cation Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any media as it will vary with local water conditions and water consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period, 3M Puriﬁ cation Inc. will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this

paragraph is Customer’s sole remedy and 3M Puriﬁ cation Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual.

Limitation of Liability. 3M Puriﬁ cation Inc. will not be liable for any loss or damage arising from this 3M Puriﬁ cation Inc. product, whether direct, indirect, special, incidental, or consequential, regardless of the

legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

3M Puriﬁ cation Inc.

400 Research Parkway Meriden, CT 06450 U.S.A. Toll Free: 1.866.990.9785 Worldwide: 203.237.5541 Fax: 203.238.8701 www.3Mfoodservice.com www.3Mpuriﬁ cation.com