3M 8545 User Manual

April 2020

3M™ Polyurethane Protective Tape 8545
Matte Black (no adhesive)

Technical Data Sheet

Product Description

3M™ Polyurethane Protective Tape 8545 Matte Black is made from an abrasion- resistant polyurethane
elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light.
When used in conjunction with an applied paste or structural adhesive, 3M 8545 Matte Black Tape provides
protection of a surface from corrosion, abrasion and minor impact damage. It can be painted or applied over
painted surfaces.

Typical Physical Properties and Performance Characteristics

Note: The following technical information and data should be considered representative or typical only and

should not be used for specification purposes. ASTM = American Society for Testing and

Materials.

Metric

values are listed in

par

enthesis.

A.

Dimensions:

Approximate

Tape

Thickness:

0.04 inch (1.02 mm)

Standard

Roll

Length:

36 yd (32.9 m)

Available Widths:

1/2-inch min. to 24-inch max. (1.25 cm to 61 cm)

Approximate Weight:

1.98 lb/yd2 (1.07 kg/m2)

B. Typical Physical

Properties

and

Performance Characteristics:

PROPERTY

TEST

METHOD

UNITS

TYPICAL

V

ALUE

Tensile

Strength @ Br

eak

ASTM D882

lb/in (N/100 mm)

170 (2,975)

Elongation % @ Break

ASTM D882

%

500

General Information

• 3M Polyurethane Protective Tape and Films have weather resistance properties and have been used to isolate and

protect substrates from environmental damage and corrosive elements.

• 3M Polyurethane Protective Tape and Films may be painted per 3M Technical Bulletin, “Polyurethane Protective

Tape, Painting Instructions” (70-0702-6358-0).

Shipping and Storage

No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this
product. Keep film in a clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping
carton. Return partially used rolls to the shipping carton. Shelf Life: Two (2) years from the date of manufacture or as
expressly certified by 3M.

Precautionary Information

Refer to Product Label and Safety Data Sheet (SDS) for health and safety information before using this product. Always wear
personal protection equipment, such as half or full face piece air purifying respirator suitable for organic vapors and particulates. For

additional health and safety information, please visit www.3m.com/MSDS or call 1-800-364-3577 or [phone].

Additional Information

In the U.S. call toll free 1-800-235-2376, or fax [phone] or 651-737-2171. For U.S. Military, call 1-866-556-5714. If you are
outside of the U.S., please contact your nearest 3M representative.

Authorization to Use
Ensure products meet all applicable specifications, standards, and maintenance manual requirements for the platform
being worked on and validate all aircraft approvals against current technical document.

These products are manufactured under a 3M Quality Management System registered to the AS9100 standard

Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by
3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative
nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to
assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is
granted or implied with this information.
Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and
performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and
determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and
reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product
and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to
property.
Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or
product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product
specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not
conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the
purchase price.

Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for
any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including,
but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to,
warranty, contract, negligence, or strict liabilit

Automotive & Aerospace Solutions Division
3M Center
St. Paul, MN 55144-1000
Phone [phone]
Web www.3M.com/aerospace

Issue date: 4/2020

3M is a trademark of 3M Company.
All other trademarks are the property of their
respective owners.
© 3M 2020. All rights reserved.

Technical Data Sheet

3M™ Polyurethane Protective Tape 8545

4