3
3M-Matic
™
Automatic Adjustable
Stainless Steel Case Sealer 800af-s
Reliable
productivity in
corrosive and
high moisture
environments
1
2
3
3M-Matic™Automatic Adjustable Stainless Steel
Case Sealer 800af-s…rugged dependability
For durability and productivity in
high-moisture and corrosive
packaging operations, the 3M-Matic
™
Automatic Adjustable Stainless
Steel Case Sealer 800af-s conforms
to NEMA standard 250 type 4x
specifications for watertight
enclosures.
Engineered with 99% stainless steel
for corrosion resistance, there are no
painted surfaces.
For productivity, flaps are folded and
tightly sealed at up 28 cases/minute.
Easy-to-install and use, you’ll be
quickly making tight, consistent
seals on a wide range of RSCs with
minimal operator training.
Height and width adjust easily for
cases as small as 4.75" high x 4.75"
wide and as large as 24.5" high x
21.5" wide.
Sturdy construction and twin motor
side drives handle case weights from
5-85 lbs.
3M™AccuGlide
™
Stainless Steel Taping Head
• Designed for high moisture and
corrosive environments but not for
direct high pressure wash down
• Upper and lower heads easily
removed for service
Frame mounted tape drum
• Easily mounts up to 16" tape diameter
• Use with a full range of Scotch
®
Box Sealing Tapes in 36 mm to
48 mm widths
• Friction drum brake to maintain proper
tape tension and prevent overcoasting
for smooth tape application
Dual masts and dual crossbar
• Provides greater stability of
taping head position
Belt drive assembly
and gearmotor on each side
• Traction-grip surface on
belts for positive case drive
through top flap folding
and taping
• Laced belt construction for
replacement ease
• Easily replaced assembly
• Dual gearmotors to maintain
reliable 78'/minute belt speed
Top flap compression rollers
on each side
• Positions and closes flaps before
taping for an improved seal
Optional casters
• Caster brake and locking swivel
for on the job stability
• Large 4" diameter polyolefin
tires for easy movement
• Corrosion-resistant bushing
5
Flap folding rods
• Precisely closes major box flaps
Flap kicker for automatic
rear flap closure
• Sturdy one-piece construction
• Easy-to-use graduated scale
for kicker adjustment
Convenient on/off switch
• Can be repositioned on either side
for better access and line changes
Hinged access doors
• Punched steel to observe case flow
• Electrical/pneumatic interlock
for safety
• Standard left-side mounted;
optional right or both
side mounted
Centrally-located emergency
stop on both sides
• Easily accessible e-stop
• Cuts off electrical and pneumatic
Adjustable leg height
• Graduated for precise
adjustment from 24" to 35"
bed height (without casters)
Air filter/regulator/gauge
• Lock-out on/off air valve
to maintain proper pressure
Box gate (indexer)
• Separates boxes from flooded
infeed conveyor
• Adjustable pressure and height
Instructional and safety labeling
• Permanently bonded to resist
distortion from heat and humidity
Width adjustment crank
• Set for case widths
from 4.75" to 21.5"
Box Capacities
Length: 6" to 30"
Width: 4.75" to 21.5"
Height: 4.75" to 24.5"
1
6
Specifications:
Box:
Boxes must meet current FBA/PMMI voluntary standards for RSC
containers. Boxes not meeting these standards – for example, width
is more than 50% of length or depth is less than 25% of length –
should be test run to ensure satisfactory machine performance.
Style: Regular slotted container (RSC)
Bursting test: 125 to 275 lbs. per sq. inch single or double wall,
B or C flute.
Size: Min Max
Length 6" (150 mm) 30" (760 mm)
Width 4.75" (120 mm*) 21.5" (545 mm)
Height 4.75" (120 mm) 24.5" (620 mm)
Special modifications may be available for carton sizes not listed
above. Contact your 3M sales representative for information.
Note: The 3M-Matic™800af-s can accommodate most boxes within
the size range listed above.
However, if
Box length in Direction of Seal
is less than .6
Box Height
boxes should be test run to ensure proper machine performance.
Also, some wide low boxes will require the removal of the
compression rollers.
Min Max
Weight: 5 lb. (3 kg) 85 lb. (38 kg)
Packing: Contents must be heavy enough to hold box flat on
conveyor bed with bottom flaps fully closed. Contents must support
top flaps. Contents must not extend beyond top flap score line.
Tape:
Scotch brand pressure sensitive box sealing tapes.
Width: 800af-s: 1.5 inches or 36mm minimum to 2 inches or
50mm maximum.
800af3-s: 2 inches or 50 mm minimum to 3 inches or 75 mm
maximum wide.
Roll diameter up to 16 inches (400) diameter on a 3 inch
(75 mm) diameter core.
Machine:
Motor horsepower(per motor): 1/6 Hp
Power:
Electrical — 115 V, 60Hz, 3.8A 440 watts, 8 ft. (2.4m)
power cord with grounded plug included.
Pneumatic – 70PSIG (5 bar), 2.5 SCFM (76-L/min @ 20°C,
1 bar) at 28 boxes per minute.
Contact your 3M sales representative for power requirements not
listed above.
Weight:
820 lbs. (370 kg) uncrated
900 lbs.(410 kg) crated
Operating rate: Up to 28 boxes/minute
Box drive belt speed: 78 fpm (.4 m/s)
Operating conditions: Use in relatively clean environments
at 40°F to 120°F (5°C to 50°C) with clean, dry boxes.
Machine should not be washed down.
Installation:
• Machine must be level
• Custom-supplied infeed and
exit conveyors must provide
straight and level box entry
and exit
• Exit conveyors (powered or
gravity) must convey sealed
boxes away from machine
• Powered infeed conveyors
must not exceed 60 feet per
minute (.3 m/s) and guide
boxes into machine
Product Use: User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s method of application.
Warranty and Limited Remedy: THE FOLLOWING WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE: 3M sells its 3M-Matic
™
Automatic Adjustable Stainless Steel Case Sealer 800af-s with the following warranties: 1) The
Taping Head knife blades, springs and rollers will be free from all defects for ninety (90) days after delivery. 2) All other Taping Head parts will be free from all defects for three (3)
years after delivery. 3) All other parts will be free from all defects for two (2) years after delivery.
Please refer to individual data pages for additional details and exceptions.
If any 3M-warrantied part is proved to be defective within its warranty period, then the exclusive remedy and 3M’s and seller’s sole obligation shall be, at 3M’s option, to repair
or replace the part, provided the defective part is returned immediately to 3M’s factory or an authorized service station designated by 3M. A part will be presumed to have
become defective after its warranty period unless the part is received or 3M is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is
unable to repair or replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the purchase price. 3M shall have no obligation to
provide or pay for the labor required to install the repaired or replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse,
carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to non-lubrication, inadequate cleaning, improper operating environment,
improper utilities or operator error.
Limitation of Liability: 3M and seller shall not be liable for direct, indirect, special, incidental or consequential damages based upon breach of warranty, breach of contract,
negligence, strict liability or any other legal theory.
The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller.
Printed in U.S.A.
© 3M 2005
70-0710-0319-1
AccuGlide
™
, 3M-Matic™,
and Scotch®are trademarks
of 3M.
Industrial Business
Industrial Adhesives and Tapes Division
Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55106
1-800-362-3550
www.3M.com/packaging
3
Footprint:
3M-Matic™Automatic Adjustable
Stainless Steel Case Sealer 800af-s
Box Travel
Control Side
Air Hose Connection
L2
FW
B
H
C
L1
W L1 L2 H B C* F
Min inches (mm) 38.8 (985) 75.6 (1920) 93.4 (2370) 62 (1575) 24 (610) 5.3 (135) 32.5 (825)
Max inches (mm) 38.8 (985) 75.6 (1920) 3.4 (2370) 86 (2185) 35 (890) 5.3 (135) 32.5 (825)
*Casters are optional
4
Loading...