3M 3896 User Manual
3M™ Round, Jacketed, Flat Cable
.025″ 30 AWG Stranded, Mass-Term, PVC/PVC 3896 Series
• Round construction permits easier routing
• 30 AWG wire on .025 inch centers permits
mass termination
• Continuous split/bond allows for mass
termination on 2.4 inch centers (approximate)
• Close spacing permits higher signal density
• Primary cable is zippable for branching or
discrete terminations
• PVC insulation provides excellent flexibility
• Recommended for use with 3M™ Tripolarized
Wiremount Socket 82XXX-600X, .050" x .100";
3M™ Mini D Ribbon (MDR) Wiremount Plug
101XX-8X00EE, .050"; and 3M™ Pak 50 IDC
Sockets P25E-XXXs-XXX
• See Regulatory Information Appendix (RIA)
for chemical compliance information
(RIA E1 & C1 apply)
Date Modified: July 2, 2007
TS-2173-B
Sheet 1 of 2
Physical
Jacket Material:
Jacket Color:
Primary Material:
Marking Standard:
Conductors:
Inner Wrap:
Electrical
Voltage Rating:
Insulation Resistance:
Characteristic Impedance:
Propagation Delay:
Velocity of Propagation:
Note:Unbalanced is measured between ground-signal-ground conductors.Balanced is measured between conductors within a pair.
Environmental
Temperature Rating:
Flammability Rating:
Color:
Capacitance:
Inductance:
Polyvinyl Chloride (PVC)
Black
Polyvinyl Chloride (PVC)
Gray
UL AWM 20596 105C 30V VW1 3M NU
30 AWG, 7 × 38 AWG [ 7 × Ø 0.102 ] Tinned Stranded Copper
Polyester Film
USA: 30V EU: <50V
(Primary Cable)> 1 × 10
Unbalanced Balanced
73 Ω 121 Ω
20.8 pF/ft [ 68.2 pF/m ] 12.0 pF/ft [ 39.4 pF/m ]
0.11 μH/ft [ 0.36 μH/m ] 0.18 μΗ/ft [ 0.57 μΗ/m ]
1.51 ns/ft [ 4.95 ns/m ] 1.45 ns/ft [ 4.76 ns/m ]
67% 70%
-20°C to + 105°C
USA: VW-1 Canada: FT1
10
Ω/10 ft. [ 3m ]
UL File No.: E42769, Style No.: 20596
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round, Jacketed, Flat Cable
.025″ 30 AWG Stranded, Mass-Term, PVC/PVC 3896 Series
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.05 ±.010
[ ] Dimensions for Reference
Only
Number of
Conductors
20 3896/20 0.30 [ 7.6 ] 0.475 +/- .004 [12.70]
26 3896/26 0.33 [ 8.4 ] 0.625 +/- .004 [15.88]
30 3896/30 0.37 [ 9.4 ] 0.725 +/- .006 [18.42]
32 3896/32 0.37 [ 9.4 ] 0.775 +/- .006 [19.69]
34 3896/34 0.37 [ 9.4 ] 0.825 +/- .006 [20.96]
36 3896/36 0.39 [ 9.9 ] 0.875 +/- .006 [22.23]
40 3896/40 0.39 [ 9.9 ] 0.975 +/- .006 [24.77]
50 3896/50 0.44 [ 11.2 ] 1.225 +/- .006 [31.12]
52 3896/52 0.66 [ 16.8 ] 1.275 +/- .009 [32.39]
60 3896/60 0.70 [ 17.78 ] 1.475 +/- .009 [37.47]
68 3896/68 0.74 [ 18.8 ] 1.675 +/- .009 [42.55]
80 3896/80 0.78 [ 19.8 ] 1.975 +/- .011 [50.17]
100 3896/100 0.88 [ 22.4 ] 2.475 +/- .025 [62.87]
2.40
61.0
3M Part
Number
TYP
Diameter A ± .03 Dimension B
(See Note 2)
BONDED
SPLIT
1.00
25.4
"A"O
Pape r [Mfg
Optional]
0.026 [.66] Min.
PVC Jacket
Thickness
Notes:
1. Red marking on one edge of primary cable designates wire #1.
2. Dimension B pertains to bonded area only.
Ordering Information
Number of Conductors
(See Table)
Blank = Standard, Repeating Split / Bonded Wires
SO = Continuously Bonded Wire (No Split)
Polyeste r Film
30 AWG, 7 X 38 AWG [7X Ø 0.102]
3896/XX XX 275 XX
"B"
.025
0.64
PVC Primary Insulation
Blank = Standard
SF = Splice Free
Length of Roll in Feet:
275 = 275 ft Standard
TYP
Note 3: Contact 3M for availability of additional conductor counts and or custom roll lengths
3M
Interconnect Solutions
http://www.3M.com/interconnects/
TS-2173-B
Sheet 2 of 2
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Loading...