Page 1
3M Round Conductor Flat Cable
.033″ 30 AWG Stranded, PVC 3849 Series
S 30 AWG stranded wire on .0333 inch centers
permits termination to all three rows in DIN
connectors.
S Stranded wire provides flexibility and extended
product life.
S Zippable for branching or discrete termination
S RoHS* compliant
Date Modified: January 20, 2004
Physical
Insulation
Material: Polyvinyl Chloride (PVC)
Color: Gray
Marking
Standard: None
CSA Option:
Conductors: 30 AWG 7 X 38 [ 7 X 0.102 ] Tinned Stranded Copper
AWM 2651 105C 300V VW1 3M NU
EU <50V
C
AWM IA 105C 300V FT1
Electrical
Voltage Rating: USA: 300V Canada: 300V EU: <50V
Insulation Resistance: >1X 10
Unbalanced Balanced
Characteristic Impedance: 89 Ω 144 Ω
Capacitance: 17.5 pF/ft. [ 57.4 pF/m ] 10.5 pF/ft (34.5 pF/m)
Inductance: 14 µH/ft. [ 0.46 µH/m ] .22 µΗ/ft (0.72 µΗ/m)
Propagation Delay: 1.56 ns/ft. [ 5.12 ns/m ] 1.51 ns/ft (4.95 ns/m)
Velocity of Propagation: 65% 67%
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair.
10
Ω/10 ft. [ 3m ]
TS-0573-09
Sheet 1of 2
Environmental
Temperature Rating: -- 2 0 °C to +105°C
Flammability Rating: USA: VW-1 Canada: FT1
UL File No.: E42769, Style No.: 2651
3
Interconnect Solutions
http://www.3M.com/interconnects/
Restriction of the Use of CertainHazardous Substances in Electrical and Electronic Equipment
3M is a trademark of 3M Company.
For technical, sales or ordering information call
*RoHS = Directive 2002/95/EC,
800-225-5373
Page 2
3M Round Conductor Flat Cable
.033″ 30 AWG Stranded, PVC 3849 Series
.033 ± .003
[0.85]
(OPTIONAL)
Conductors
.017 ± .007
[0.43]
Number of
96 3849/96 3.197 ± .020 [ 81.20 ] 3.164 ± .015 [ 80.37 ]
3M Part
Number
A
B
.033 ± .002 Typ
[0.85]
Dimension A Dimension B
Note: Red marking on one edge of cable designates wire #1.
Ordering Information
Blank = Standard
C = Canadian Certified
Note: Standard length is 100 ft/roll.
30 AWG 7 X 38 ( 7 X 0.102 ) Tinned
Stranded Copper Conductors
3849/XX
Number of Conductors
(See Table)
Version
PVC Insulation
Inch
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
±.005±.1 ± 01
[ ] Dimensions for
Reference only
TS-0573-09
Sheet 2 of 2
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Page 3
© 3M 2004
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...