3M 1194 DATA SHEET
1194 Tape
Copper Foil with Nonconductive Adhesive
Data Sheet
Product Description
3M 1194 Tape consists of a 1-ounce deadsoft
copper foil backing and an aggressive
nonconductiv e pr es su re-sensitive acry lic
adhesive.
• Deadsoft 1-ounce copper foil backing
• Nonconductive acrylic adhesive
• Supplied on a removable liner for easy
handling and diecutting
Like all 3M shielding tapes, 3M 1194 is
available in standard and custom widths and
lengths. Standard length for 3M 1194 is 36
yards.
• Widths from 1/4” to 23”
• Longer lengths up to several times normal
length, dependent upon width. Check with
Customer Service.
Applications
3M 1194 Tape is typically used for
applications requiring economical electrical
bonding, grounding, and EMI shielding. The
copper foil backing is solderable and resi st s
oxidation and discolora tion.
Shielding Effectiveness
Many factors determine the true shielding
effectiveness of a shielding tape, including
type and thickness of foil, adhesive type,
intimacy of contact, smoothness of application
surface, strength and frequency of the EMI
signal, etc. However, using standard tests and
fixtures, it is possible to determine a value for
the attenuation .
For 3M 1194 Tape, typical shielding
effectiveness (far field) is in the range of 50dB
to 60dB (30 MHz to 1 GHz).
Properties Typical Values
Backing thickness
Total thickness (backing plus adhesive) 2.6 mil (0.066mm)
Breaking strength 1 25 lb./in (44 N/10mm)
Adhesion to steel 1 40 oz/in (4,4 N/10mm)
Flame retardancy 2 Pass
* Footnote: 1. Test method ASTM D 1000
2. UL-recognized for flame retardancy per UL 510, Product Category 0ANZ2, File E17385.
1
1.4 mil (0,04mm)
3M is a tradema rk of 3M.
Important Notice
All statements, technical information and recommendations
related to the Seller’s products are based on information
believed to be reliable, but the accuracy or completeness
thereof is not guaranteed. Before utilizing the product, the
user should determine the suitability of the product for its
intended use. The user assumes all risks and liability
whatsoever in connection with such use.
Any statements or recommendations of the Seller whic h are
not contained in the Seller’s current publications shall have
no force or effect unless contained in an agreement signed
by an authorized officer of the Seller. The statements
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
800-676-8381
http://www.3m.com/elpd
contained herein are made in lieu of all warranties,
expressed or implied, including but not limite d to the impli ed
warranties of merchantability and fitness for a part ic ul ar
purpose which warranties are hereby expressly disclaimed.
SELLER SHALL NOT BE LIABLE TO THE USER OR ANY
OTHER PERSON UNDER ANY LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR
STRICT LIABILITY, FOR ANY INJURY OR FOR ANY
DIRECT, INDIRECT, SPECIA L, INCIDENTAL OR
CONSEQUENTI AL DAMAGES SUSTAINED OR
INCURRED BY REASON OF THE USE OF ANY OF THE
SELLER’S PRODUCTS THAT WERE DEFECTIVE.
© 3M 1998
78-8124-4705-6
Loading...