PRINCETON™ RECESS BATH
WITH INTEGRAL OVERFLOW
BARRIER FREE |
AMERICAST® BRAND ENGINEERED MATERIAL |
|
|
|
|
PRINCETON™ RECESS BATH WITH
INTEGRAL OVERFLOW
Americast® brand engineered material
2390.202 ICH (Chrome Trim) Left Hand Outlet
2390.202 ICHTC Same as above with Tub Cover
2391.202 ICH (Chrome Trim) Right Hand Outlet
2391.202 ICHTC Same as above with Tub Cover
2390.202 IPB (Polished Brass Trim) Left Hand Outlet
2390.202 IPBTC Same as above with Tub Cover
2391.202 IPB (Polished Brass Trim) Right Hand Outlet
2391.202 IPBTC Same as above with Tub Cover
2390.202 IBS (Brushed Satin Trim) Left Hand Outlet
2390.202 IBSTC Same as above with Tub Cover
2391.202 IBS (Brushed Satin Trim) Right Hand Outlet
2391.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included
with bath |
|
|
|
Photograph details integral overflow and drain |
|
• Escutcheon included and installed on bath |
|
|
|
assembly. Drain assembly included with bath. |
|
• Acid resistant porcelain finish |
|
|
|
|
|
• Recess bath with integral apron and |
|
|
|
|
|
tiling flange |
|
|
|
|
|
|
|
To Be Specified: |
|||
• Integral lumbar support |
|
|
|||
• Beveled headrest |
|
|
Color: |
||
• Full slip-resistant coverage |
|
|
Bath Filler: (specify finish) |
||
|
|
Bath Drain: 1583.470 (specify finish) |
|||
• End drain outlet |
|
|
|||
|
|
|
|
||
Nominal Dimensions: |
|
|
To Be Specified - Optional: |
||
|
|
Pressure Test Kit†: 791363-0070A |
|||
1524 x 762 x 356mm |
|
|
|
|
|
(60" x 30" x 14") |
|
|
*See faucet section for additional models available |
||
|
|
† Pressure Test Kit is necessary to seal overflow and perform |
|||
Bathing Well Dimensions: |
|
|
system pressure test. |
||
|
|
|
|
||
1423 x 635 x 337mm |
|
|
Americast® brand engineered material is a composition of porcelain bonded |
||
(56" x 25" x 13-1/4") |
|
|
|||
|
|
to enameling grade metal, bonded to a patented structural composite. |
|||
Compliance Certifications - |
|
|
|
|
|
Meets or Exceeds the Following Specifications: |
|
|
|
|
|
• ASME A112.19.4 for Americast Plumbing Fixtures |
|
|
|
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES |
|
• ASTM F-462 for Slip-resistant Bathing Facilities |
|
|
|
||
|
|
|
|||
|
|
|
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND |
||
• ANSI Z124.1 Ignition Test |
|
|
|
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES. |
|
|
|
|
|||
• ASTM E162 for Flammability |
|
|
|
INSTALL WITH SEAT AT HEAD END. |
|
|
|
|
|
||
• NFPA 258 for Smoke Density |
|
|
SEE REVERSE FOR PRODUCT DIMENSIONS |
||
|
|
|
|||
|
|
|
AND SPECIFICATIONS |
||
|
H113 |
|
|||
© 2008 AS America Inc. |
Revised 5/06 |
||||
|
|
|